| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| Grasso |
|
DA-6(A) A used screw package, type of refrigerant: R717/Ammonia |
|
37 kW |
|
Used: Grasso screw package. This Grasso screw package is in very well maintained condition and equipped with a Schorch 22kW E-motor, horizontal oil separator, oil pump, water-cooled oil cooler shell & tube type, eco connection, switch-board with Unisab II controller, serial number unit 7886. Screw package will be delivered with all necessary PED certificates. Mentioned cooling capacity is with the refrigerant R717 at -40°/+35°C, absorbed power approx. 31kW.
|
|
2000 |
|
More information |
| Grasso |
|
4-2-10 used piston package, type of refrigerant: NH3/R717 |
|
55 kW |
|
Used and in good condition: complete Grasso direct driven 4-2-10 2 stage low temperature piston package, consisting of the following main components: Schorch 55 kW E-motor, 1465 RPM, Grasso/Gea controller, oil separator with heating, closed intercooler with injection, capacity control.
|
|
2001 |
|
More information |
| Grasso |
|
R.C 4-6 used piston package, type of refrigerant: R717/All Freon |
|
69 kW |
|
Used and in very good maintained condition: complete Grasso V-belt driven 4 cylinder piston package, consisting of a 37 kW E-Motor Leroy Somer, oil separator, all security devices. Mentioned cooling capacity is at -10°C/+40°C.
|
|
1994 |
|
More information |
| Grasso |
|
H-61 used freeze screw package, type of refrigerant: R717/Ammonia |
|
85 kW |
|
Used and in very good condition and well maintened: complete Grasso/GEA freeze screw package, performed with a 37 kW Schorch E-motor, vertical oilseparator, water-cooled oilcooler type plate heatexchanger, eco connection, Grasso controller. Grasso screw package is supplied with the necessary Tüv-certificates. Mentioned cooling capacity of 85 kW is at an evaporating temperature of -40 °C and +35 °C condensing temperature with eco, refrigerant ammonia. If required we can provide this refrigerator/freezer compressor with a larger E-motor.
|
|
1997 |
|
More information |
| Grasso |
|
RC 4-9 used piston compressor package, type of refrigerant: NH3/R717 |
|
100 kW |
|
Used and in good condition: complete Grasso/GEA RC 4-9 direct driven piston compressor package, consisting of the following main components: Schorch 37kW E-motor 975RPM, Grasso/GEA controller, oil separator, switch-board with star/delta switch. Mentioned cooling capacity is with refrigerant R717 ammonia at an evaporating temperature of 0°C and +35°C condensing temperature, speed of the motor 975RPM.
|
|
1998 |
|
More information |
| Grasso |
|
RC 86 used piston package, type of refrigerant: R717/All Freon |
|
110 kW |
|
Used and in good maintained condition: complete Grasso direct drive 8 cylinder piston package, consisting of a 55 kW Schorch E-Motor, year 2004, oil separator, all security devices. Mentioned cooling capacity is at -10°C/+40°C.
|
|
1986 |
|
More information |
| Grasso |
|
RC 8-6 H used cooling compressor package, type of refrigerant: R507A |
|
118 kW |
|
Complete used Grasso cooling compressor package, consisting of oil separator, Leroy Somer E-motor, Grasso computer.
|
|
2004 |
|
More information |
| Grasso |
|
RC4212used piston package, type of refrigerant: R717/NH3 |
|
138 kW |
|
Used Grasso/GEA two stage piston package. This in very good condition direct driven piston package is equipped with :
• 1 piece Grasso/GEA two stage piston compressor type RC4212
• Schorch 90kW E-motor
• Oil separator
• Closed intercooler
• All necessary safety devices
Mentioned cooling capacity of 138kW is with R717/ammonia at -32°C/+30°C at 1000RPM.
|
|
2000 |
|
More information |
| Grasso |
|
35HP used piston package, type of refrigerant: R717/NH3 |
|
170 kW |
|
Used piston package brand Grasso/GEA type 35HP for heat pump application. This in very good condition direct driven piston package consists of the following main components:
• 1 piece Grasso 3-cylinder piston compressor type 35HP, direct driven
• 45kW WEG E-motor (400V,50Hz,1475RPM / 460V,60Hz,1770RPM)
• Vertical oil separator
• Pressure gauge set
• All security devices
• All necessary pressure certificates
Mentioned cooling capacity of 170kW is with refrigerant R717/NH3 at +32°C /+70°C, 1200RPM.
Cooling capacity with refrigerant R717/NH3 at +5°C /+35°C on 1475RPM/50Hz is 106kW, absorbed power 18,5 kW.
|
|
2011 |
|
More information |
| Grasso |
|
FX LP 2 x 450 DUO used cool-/freeze package, type of refrigerant: R717/Ammonia |
|
172 kW |
|
Used in very well maintained condition: Grasso/GEA cool-/freeze package consisting of the following main components: two pieces built on frame Grasso/GEA HR - H36 S - 2 screw compressors screw compressors with each 160 kW Leroy-Somer E-motor (we can also deliver with 90 kW E-motors), central oil separator, oil pump with thermosifon oil cooler, eco connection. Switchboard cabinet with Siemens S7 PLC. Mentioned cooling capacity of 172 kW is at an evaporating temperature of -40°C +35°C condensing with eco, absorbed power 121 kW. Cooling capacity at -10°C +35°C condensing 592 kW absorbed power 166 kW. Unit is delivered with all the required TÜV certificates.
|
|
2008 |
|
More information |
| Grasso |
|
35HP used piston package, type of refrigerant: R744/CO2 |
|
184 kW |
|
Used piston package, brand Grasso/GEA type 35HP. This in very good condition direct driven piston package consists of the following main components:
• 1 piece Grasso 3-cylinder piston compressor type 35HP, direct driven
• 45kW WEG E-motor (400V,50Hz,1475RPM / 440V,60Hz,1770RPM)
• Vertical oil separator
• Pressure gauge set
• All security devices
• All necessary pressure certificates
Mentioned cooling capacity of 184kW is with refrigerant R744/CO2 at -34°C /-6°C, 1450RPM.
|
|
2011 |
|
More information |
| Grasso |
|
RC 69 used compressor package, type of refrigerant: R717/Ammonia |
|
192 kW |
|
Used and in good condition: complete Grasso/GEA 69 V-belt driven compressor package, consisting of the following main components: Leroy-Somer 75 kW E-motor, oil separator, pressure gauge set + security, V-belt protective hood. Mentioned cooling capacity is at an evaporating temperature of -10°C with the refrigerant Amonia.
|
|
1990 |
|
More information |
| Grasso |
|
RC 6-9 used piston package, type of refrigerant: Freon/Ammonia |
|
192 kW |
|
Used and in very good maintained condition: complete Grasso/GEA RC 6-9 direct drive piston package, consisting of the following main components: Schorch 90 kW E-motor 1470 RPM, oil separator. Mentioned cooling capacity is at an evaporating temperature of -10°C with the refrigerant ammonia.
|
|
1989 |
|
More information |
| Grasso |
|
610 used piston package, type of refrigerant: R717/Ammonia |
|
238 kW |
|
Used and in condition as new (very few running hours: C1:11000 hours, C2: 8190 hours, C3: 3200 hours): 3 pieces Grasso/GEA piston package type 610, direct driven 1450 RPM, equipped with each a 75kW Leroy-Somer E-motor, oil separator, meter set. The compressors will be delivered with all necessary PED/TÜV certificates. Mentioned cooling capacity is with refrigerant R717 at -9°C evaporating temperature and +33°C condensing temperature.
|
|
2008 |
|
More information |
| Grasso |
|
RC411 used piston package, type of refrigerant: R717/NH3 |
|
260 kW |
|
Used single stage piston package, brand Grasso/GEA type RC411. This in good condition used Grasso/GEA RC 411 single stage compressor consist of the following main components:
Grasso 4-cylinder piston compressor type RC411, V-belt driven
Schorch E-motor 75kW,1470 RPM - 400V 50Hz 460V 60Hz 1770RPM
Vertical oil separator
Pressure gauge set
All safety devices
V-belt protective hood
Mentioned cooling capacity of 260kW is with refrigerant R717/NH3 at -10°C /+35°C on 1000RPM.
|
|
1980 |
|
More information |
| Grasso |
|
810P used compressor package, type of refrigerant: NH3/R717 |
|
300 kW |
|
Used: Grasso cooling/freeze compressor package. This Grasso cooling/freeze compressor package type 810P is in very good condition, V-belt driven, 1500 RPM, consists of the following main components, built on a frame: Grasso compressor 810P, Schorch 110kW E-motor, motor protective hood, oil separator, meter set low/high pressure, oil pressostat. Mentioned cooling capacity is with refrigerant R717, speed 1500RPM, at an evaporating temperature of -10°C and 35°C condensing temperature, absorbed electrical power 82kW.
|
|
2004 |
|
More information |
| Grasso |
|
810 used cool/freeze compressor package, type of refrigerant: Ammonia/R717 |
|
300 kW |
|
Used: Grasso/GEA cool/freeze compressor package. This is in very good condition Grasso/GEA cool/freeze compressor package type 810 directly driven by Leroy-Somer 110kW E-motor, consists of the following main components: E-motor, oil separator, meter Grasso controller. Mentioned cooling capacity is with refrigerant R717 at an evaporating temperature of -10°C and condensing temperature +35°C, absorbed electrical power 82kW. Compressor package will be delivered with all necessary pressure certificates.
|
|
2008 |
|
More information |
| Grasso |
|
V1 used screw package, type of refrigerant: R717/Ammonia |
|
338 kW |
|
Grasso / GEA screw package. This in very good condition Grasso screw package is equipped with a Schorch 315 kW E-motor, vertical oil separator, oil pump, water-cooled oil cooler shell & tube type, eco, switch-board with Siemens PLC / touch screen (programmed by Comron). Serial-no. compressor block V1 VO 268/40 7531. Mentioned cooling capacity is with the refrigerant R717 at -40°C/+35°C.
|
|
2001 |
|
More information |
| Grasso |
|
VR-V26B-28 used cool-/freeze screw package (booster), type of refrigerant: Ammonia/R717 |
|
338 kW |
|
Used and in very good condition (always maintained by GEA; compressor block replaced in 2010). Unit is equipped with vertical oil separator, oil pump, vertical oil cooler, water-cooled oil cooler shell & tube type with the possibility for Thermosifon cooling, controller of this unit through with new Siemens PLC/Simatic touchscreen will be supplied by Comron International, new Leroy-Somer 355kW E-motor 400/460V 50/60Hz. Mentioned cooling capacity at evaporating temperature of -40°C and condensing temperature of +35°C with eco is 338kW absorbed power of 208kW. Cooling capacity at 60Hz 3600RPM is ca. 422kW.
|
|
1994/2010/2021 |
|
More information |
| Grasso |
|
612E used piston package, type of refrigerant: R717/Ammonia/All Freon |
|
371 kW |
|
Used piston package brand Grasso/GEA type 612E. This in very good condition piston package consists of the following main components:
• Grasso 6-cylinder piston compressor type 612E, direct driven
• 200 kW Schorch E-motor
• Vertical oil separator
• All safety devices
Mentioned cooling capacity is with refrigerant R717/NH3 at -15°C /+30°C at 1000RPM.
Cooling capacity at -0°C /+40°C is 1036kW at 1500RPM.
|
|
2007 |
|
More information |
| Grasso |
|
RC611 used piston package, type of refrigerant: R717/NH3 |
|
390 kW |
|
Used piston package, brand Grasso/GEA type RC611. This in good condition V-belt driven piston package consists of the following main components:
Grasso 6-cylinder piston compressor type RC611, V-belt driven
160kW E-motor Leroy-Somer
Vertical oil separator
Pressure gauge set
All safety devices
V-belt protective hood
Flow rate 798 m3 /h
Serial N. Unit 1: 950355 Unit 2: 56 Unit 3: 57
Mentioned cooling capacity is with refrigerant R717/NH3 at -10°C /+35°C on 1000RPM.
|
|
1995 |
|
More information |
| Grasso |
|
RC611 used piston package, type of refrigerant: R717/NH3 |
|
433 kW |
|
Used piston package brand Grasso/GEA type RC611. This in good condition V-belt driven piston package consists of the following main components:
• Grasso 6-cylinder piston compressor type RC611, V-belt driven
• Crompton Parkinson 110kW E-motor (400V,50Hz,1475RPM)
• Vertical oil separator
• Pressure gauge set
• All safety devices
• V-belt protective hood
• Compressor built in 2007, frame 1978
Mentioned cooling capacity of 443kW is with refrigerant R717/NH3 at -10°C /+35°C on 1000RPM.
|
|
1989/2007 |
|
More information |
| Grasso |
|
YR-Y26B-28 used cooling-/freezing screw package, type of refrigerant: R717/Ammonia |
|
449 kW |
|
Used and in very good condition (always maintained by GEA; compressor block type of YR-Y26B-28 replaced in 2010. Unit is equipped with vertical oil separator, oil pump, vertical oil cooler, water-cooled oil cooler shell & tube type with the possibility for Thermosifon cooling, controller of this unit through with new Siemens PLC /Simatic touchscreen will be supplied by Comron International, new Schorch E-motor 400kW 400/460V 50/60Hz. Mentioned cooling capacity at evaporating temperature of -40°C and condensing temperature of +35°C with eco is 449kW absorbed power of 307kW. Cooling capacity at 60Hz 3600RPM is approx. 596kW.
|
|
1994/2010/2021 |
|
More information |
| Grasso |
|
RC612 used piston package, type of refrigerant: R717/NH3 |
|
450 kW |
|
Used piston package brand Grasso/GEA type RC612. This in good condition V-belt driven piston package consists of the following main components:
• Grasso 6-cylinder piston compressor type RC612, V-belt driven
• 110kW E-motor
• Vertical oil separator
• Pressure gauge set
• All safety devices
• V-belt protective hood
Mentioned cooling capacity is with refrigerant R717/NH3 at 0°C /+40°C on 1000RPM.
|
|
1996 |
|
More information |
| Grasso |
|
GD-1(U)B used refrigerator/freezer package, type of refrigerant: R717/Ammonia |
|
556 kW |
|
Used and in very good condition: Grasso/GEA refrigerator/freezer package consisting of the following main components: two pieces on frame built (DUO) G1 screw compressors of which one screw compressor equipped with a 75 kW E Schorch-engine and one with a 97 kW E-Motor (frequency controlled) Central oil separator, thermos chiffon, oil cooler. Furthermore, this well maintained package is equipped with a control cabinet and with a Siemens S7 PLC with touch screen built by Comron. The control box is equipped with a frequency controller brand Danfoss. Low pressure separator (surge drum) brand Polar 2.1 m³, 2 pieces ammonia liquid pumps, all required pressure test certificates and evaporative condenser to choice. 556 kW cooling capacity is listed with the refrigerant Ammonia at an evaporation temperature of-8 °C. Cooling capacity at-40 °C evaporating temperature is 130 kW.
|
|
2004 |
|
More information |
| Grasso |
|
SP2 ZE-6BN used freeze pump installation, type of refrigerant: R717/Ammonia |
|
578 kW |
|
Used Grasso/GEA freeze pump installation. This in very good condition freeze pump installation (compressors and E-motors completely overhauled) will be composed of the following main components:
• On frame-built two-stages screw compressors consisting of:
1 piece low pressure Grasso screw compressor (booster) type Z-61 with a 200kW Schorch E-motor,
1 piece high pressure Grasso screw compressor type P-1 with a 160kW Schorch E-motor,
Central oil separator, oil pump, thermosyphon oil cooler,
Switch-board cabinet with starter packages and new Siemens S7 PLC/Simatic touchscreen
• Low pressure separator volume 3m³ with 2 pieces ammonia liquid pumps
• Eco vessel
• High pressure liquid receiver
• Air-cooled condenser or evaporating condenser of your choise
• All required pressure certificates
• Six months warranty
The mentioned cooling capacity of 578 kW is with refrigerant R717/ammonia at an evaporating temperature of -40°C and a condensing temperature of +35°C.
|
|
2002 |
|
More information |
| Grasso |
|
RR-R36S-28 used cool-/freezer screw package, type of refrigerant: Ammonia/R717 |
|
676 kW |
|
Used and in very good condition (always maintained by GEA; compressor block overhauled in 2010) Grasso/GEA screw package is equipped with the following main components: Schorch 200 kW E-motors, vertical oil separator, water-cooled oil cooler shell & tube type with the possibility for thermosiphon cooling, controller of this unit through with new Siemens PLC/Simatic touchscreen will be supplied by Comron International. Mentioned cooling capacity is at an evaporating temperature of -10°C and condensing temperature of +35°C with an absorbed power of 179kW. Cooling capacity at evaporating temperature of -40°C and condensing temperature of +35°C with eco is 197kW.
|
|
1994/2010 |
|
More information |
| Grasso |
|
/ Frigopack SP2 used freeze pump installation, type of refrigerant: R717/Ammonia |
|
856 kW |
|
Used Grasso/GEA complete two-stage Frigopack freezing-pump installation (built by Grasso / GEA for the company JBT/Frigoscandia). This in new condition two-stage Frigopack freezing-pump installation is composed of the following main components:
• Grasso/GEA two-stage screw package type BetaE-6AT, serial nr. 7917, year of manufacture 2000, equipped with:
1 piece low pressure Grasso/GEA screw compressor (Booster) type XBR coupled to a 250 kW Schorch E-motor
1 piece high pressure Grasso/GEA screw compressor type SR coupled to a 250 kW Leroy-Somer E-motor
Central oil separator, oil pump, thermosyphon oil cooler
Switchboard with star/delta switches and Siemens S7 PLC
• Low pressure separator (Surge drum), brand Armultra-LTD, volume 7,1 m3 complete with 2 pieces hermetic ammonia liquid pumps
• High pressure tank, brand Armultra-LTD volume 980 liters
• Eco vessel, brand Armultra-LTD volume 3,7 m3
• Closed intercooler, volume 240 liters coupled to the suction side -40°C for extra capacity / efficiency
• Custom made switch-board cabinet with new Siemens S7 PLC/Simatic touchscreen
• Baltimore / Evapco evaporating condenser of your choice
• All required valves, Danfoss PM control stations, floaters
• Software, E- diagrams, P&ID drawings, all required TÜV certificates
The mentioned cooling capacity of 856 kW is with refrigerant R717/ammonia at -40°C/+35°C, absorbed power approx. 490kW.
Note: The Grasso screw compressors with E-motors have been completely overhauled at Comron International and will be delivered with six months warranty.
|
|
2002 |
|
More information |
| Grasso |
|
RC1212 used piston package, type of refrigerant: R717/Ammonia/All Freon |
|
895 kW |
|
Used piston package, brand Grasso/GEA type RC1212. This in very good condition piston package consists of the following main components:
Grasso 12-cylinder piston compressor, type RC1212, direct driven
290 kW Schorch E-motor, 995RPM
Vertical oil separator
All safety devices / Pressure gauge set
Flow rate 1592 m3/h
Mentioned cooling capacity is with refrigerant R717/NH3 , 0°C /+40°C at 1000RPM.
|
|
1998 |
|
More information |
| Grasso |
|
V1400 used cooling compressor, type of refrigerant: R717/NH3 |
|
1223 kW |
|
Used single stage cooling compressor, brand Grasso/GEA type V1400.
This is really good condition. Used cooling compressor consist of the following main components:
Grasso/GEA 8 cylinder/piston V1400 compressor pack
250 kW E-motor, brand WEG (maximum 1190 RPM)
Grasso maintenance monitor
Mentioned cooling capacity of 1123kW is with refrigerant R717/NH3 at 0°C /+35°C, 1200RPM.
|
|
2014 |
|
More information |
| Grasso |
|
Frigopack ZE-6BN / Beta E-6 AT used freeze-pump installation, type of refrigerant: R717/Ammonia |
|
1460 kW |
|
Used Grasso/GEA complete two-stage Frigopack SP2 freezing-pump installation (built by Grasso / GEA for the company JBT/Frigoscandia). This in new condition two-stage Frigopack freezing-pump installation is composed of the following main components:
• Grasso/GEA two-stage screw package type ZE-6BN, serial nr. 8460, built 2001/2002, equipped with:
1 piece low pressure Grasso/GEA screw compressor (Booster) type Z-61 coupled to a 200 kW Schorch E-motor
1 piece high pressure Grasso/GEA screw compressor type P-1 coupled to a 160 kW Schorch E-motor
Central oil separator, oil pump, thermosyphon oil cooler
Switchboard with star/delta switches and Siemens S7 PLC
• Grasso/GEA two-stage screw package type BetaE-6AT, serial nr. 7917, built 2000, equipped with:
1 piece low pressure Grasso/GEA screw compressor (Booster) type BET-61 coupled to a 250 kW Schorch E-motor
1 piece high pressure Grasso/GEA screw compressor type S-2 coupled to a 250 kW Leroy-Somer E-motor
Central oil separator, oil pump, thermosyphon oil cooler
Switchboard with star/delta switches and Siemens S7 PLC
• Frame 1 is equipped with:
Low pressure separator (Surge drum), brand Armultra-LTD, volume 7,1 m3 complete with 2 pieces hermetic ammonia liquid pumps
• Frame 2 is equipped with:
High pressure tank, brand Armultra-LTD volume 980 liters
Eco vessel, brand Armultra-LTD volume 3,7 m3
Closed intercooler, volume 240 liters coupled to the suction side -40°C for extra capacity / efficiency
Custom made switch-board cabinet with new Siemens S7 PLC/Simatic touchscreen
• Baltimore or Evapco evaporating condenser of your choice
• All required valves, Danfoss PM control stations, floaters
• Software, E- diagrams, P&ID drawings, all required TÜV certificates
The mentioned cooling capacity of 1460 kW is with refrigerant R717/ammonia at -40°C/+35°C, absorbed power approx. 689kW.
Note: The Grasso screw compressors with E-motors have been completely overhauled at Comron International and will be delivered with 6 months guarantee.
|
|
2002 |
|
More information |