| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| DWM/Copeland / Helpman |
|
storage / freeze Installation -60°C/-65°C, type of refrigerant: R23+R404A |
|
14 kW |
|
Used, very special low temperature DWM/Copeland/Helpman storage/freezing installation (cascade system) and consists of the following main components:
• Cascade central compressor unit, consists of:
1 x semi-hermetic DWM low pressure compressor, working with refrigerant R23 at evaporating temperature of -68°C
2 x semi-hermetic high pressure compressors, working with refrigerant R404A at evaporating temperature -30°C
• 2 x Helpman single sided blowing low temperature evaporators with each 2 pieces ventilators of 750W, electrical defrost, air flow 10.400m3/h, dimensions 210 x 110x 70 cm and weight 110kg
• 1 x Helpman double sided blowing evaporator for the production room(sluice) -20°C ambient temp. with 3 ventilators of 250W, electrical defrost, air flow 5.400m3/h, dimensions 345 x 170 x 59cm, weight 325kg with a cooling capacity of 28kW at evaporating temperature of -30°Cl
• 1 x Helpman air-cooled condenser with copper/seawater resistant fin coils
• Switch-board
• Under-pressure and over-pressure valves
Mentioned cooling capacity is with the refrigerant R23+R404a at -68°C/-30°C, -30°C/+40°C.
This installation is suitable for a freeze storage of approx. 600m3with a storage temperature of -60°C to -65°C, very suitable for tuna storage.
|
|
2001 |
|
More information |
| Bitzer |
|
4H-15.2Y low temprature freezing installation, type of refrigerant: R23/R717 |
|
25.3 kW |
|
Used, very special low temperature Bitzer storage/freezing installation (cascade system), suitable for very low storage temperatures of -60°C/-65°C and consists of the following main components:
• 1 x low pressure compressor, Bitzer type 4H-15.2Y, working with refrigerant R23 at evaporating temperature of -68°C and equipped with:
Capacity control 50% / 100%
Oil separator
Manometer set with all required safety devices
• Cascade Condenser of 40kW at -33°C / -40°C with R23/Ammonia R717, internal surface 21m2, RVS AISI-316
• Expansion tank, 1.420Liter, R23, min. temp. -10°C max. temp. +50°C
• Custom made switch-board
Mentioned cooling capacity is with the refrigerant R23/Ammonia R717 at -68°C/-33°C
This installation is very suitable for freezing tuna, for example, where high quality product is required. For frozen storage approx. 2.000 m3 with two units.
Note: The unit must be connected with the cascade condenser to an ammonia installation at -30°C/-40°C.
|
|
2004 |
|
More information |
| Bitzer |
|
6F-40.2Y low temprature freezing installation -60°C/-65°C, type of refrigerant: R23/R717 |
|
51 kW |
|
Used, very special low temperature Bitzer storage/freezing installation (cascade system), suitable for very low storage temperatures of -60°C/-65°C and consists of the following main components:
• 1 x low pressure compressor, Bitzer type 6F-40.2Y, working with refrigerant R23 at evaporating temperature of -68°C and equipped with:
Capacity control 33% / 67% / 100%
Oil separator
Manometer set with all required safety devices
• Cascade Condenser of 105kW at -33°C / -40°C with R23/Ammonia R717, internal surface 283m2, RVS AISI-316
• Expansion tank, 1.795Liter, R23, min. temp. -10°C max. temp. +50°C
• Custom made switch-board
Mentioned cooling capacity is with the refrigerant R23/Ammonia R717 at -68°C/-33°C
This installation is very suitable for freezing tuna or storing tuna, where high quality product is required. For freezing tuna, a maximum of 800kg/h of product can be achieved with two units. For frozen storage approx. 4,000 m3 with two units.
Note: The unit must be connected with the cascade condenser to an ammonia installation at -30°C/-40°C.
|
|
2004 |
|
More information |
| Bitzer |
|
used blast freeze/cold storage installation, type of refrigerant: R507 |
|
64 kW |
|
Used and in very good condition: Bitzer blast freeze/cold storage installation. The central blast freeze installation is equipped with the following main components: central frame with built-in 3 pcs. Bitzer 2-stage compressors type S6G-25.2Y-40P for the blast freeze installation and 3 pcs. 4CC-6.2Y cold storage compressors, non-return valves in the pressure pipes of the 2-stage compressors, one central oil separator for both systems, electrical oil floaters, liquid under cooling by means of plate heat exchangers and intermediate injection for the 2-stage compressors, for both systems a liquid tank of 228Ltr, all necessary safety devices such as low pressure / high pressure pressostats, oil safety devices, central switch-board, air-cooled condenser as desired. Blast freeze capacity is 64kW at -40°/+40°C , at -35°/+40°C it is 76kW. Cold storage capacity is 18kW at -30°/+40°C.
|
|
2000 |
|
More information |
| Bitzer |
|
HSN 7471-75-40R Bitzer storage freezing installation, type of refrigerant: R404A |
|
83 kW |
|
Used and in very good maintained condition (always maintained by GEA) storage freezing installation, brand Bitzer/Goedhart. This storage freezing installation will be composed of the following main components:
• 1 piece Bitzer screw package type HSN 7471-75-40R
• Bitzer screw package is equipped with oil separator, air-cooled oil cooler, closed intercooler for subcooling liquid coupled to the eco. compressor, Bitzer liquid tank of 180L
• Suction manifold with suction filter
• Manometer set low/high pressure with all necessary safety devices
• Complete control box with Eliwell step controller
• 4 pieces Goedhart VCI-B-82508EF freeze storage evaporators with electric defrost
• Cabero air-cooled condenser type ACHSD099MB / 2L-26D, year of 2016
Mentioned cooling capacity is with the refrigerant R404a/R507 at -30°C /+40°C.
This installation is suitable for a deep-freeze storage of approx.. 4000m3 storage space with a storage temperature of -20°C.
|
|
2005/2016 |
|
More information |
| Trane |
|
EWKH 300-DD00AC used air handler/rooftop, type of refrigerant: R407 |
|
90 kW |
|
Used air handler/rooftop: brand Trane, type EWKH 300-DD00AC. This in very good condition air handler (ex-rental machine) is equipped with the following main components: heavy metal frame housing is suitable for forklift transport, high pressure ventilator motor with connection option for flexible hose / air sock, electric heating elements is placed in the circulation of the fan motor internal, 2 pieces scroll compressors.
|
|
|
|
More information |
| Lennox |
|
FCK 100N used rooftop, type koudemiddel: R407C |
|
97 kW |
|
Used rooftop unit: brand Lennox, type FCK 100N. This in very good condition rooftop unit is equipped with 2 pieces compressors, 1 piece inside-/centrifugal ventilator (5,5kW/833 RPM), 3 pieces outside ventilators (each 3,75kW/1000RPM) Climatic 2 controller, nominal airflow 20.000m3/h, noise level 91dB(A). Mentioned cooling capacity of 97kW is with 25% fresh air, 35°C DB out , 27°C in with a COP 2.
|
|
2004 |
|
More information |
| Bitzer/Goedhart |
|
used cool/freeze installation, type of refrigerant: R507 |
|
100 kW |
|
Used, in very good condition complete Bitzer/Goedhart cooling/freezing combination (very suitable for 0°C, -10°C, -20°C storage temperatures) and consists of the following main components:
• 2 pieces Bitzer cool/freeze units with each:
2 pieces Bitzer 4P-15.2Y-40P compressors
1 piece 6J-33.2Y-40P compressor
• 10 pieces Goedhart cooling/freezing evaporators, type VNS-65457 with electrical defrost and each 5 pieces WOODS ventilators 220V/310Watt
• 1 piece Goedhart air-cooled condenser type KOAL-M66 710.6P with 2 separate sections
• Switch-board
Mentioned cooling capacity of 100kW is with the refrigerant R507 at evaporating temperature of -30°C.
Cooling capacity at an evaporating temperature of -10°C is 248kW.
|
|
2004 |
|
More information |
| Bitzer |
|
used freeze-pump installation, type of refrigerant: NH3 Ammonia |
|
140 kW |
|
Used and in condition as new (only 1 year in production) complete Bitzer 2-stage freeze-pump installation built on a steel frame and consists of the following main components:
• 3 pieces low pressure (booster) screw compressors open type OSKAB 7471 with each a 30kW E-motor
• 2 pieces high pressure screw compressors open type OSKA 7451 with each a 55kW E-motor
• 2 x oil separator 881 Ltr for the low and high pressure side
• Water cooled oil cooler type plate heat exchanger brand Alfa Laval coupled to an air-cooled Güntner dry cooler type GFH 0678/2N
• Horizontal low pressure separator 640 Ltr -40°C with 2 pieces Hermetic Cam 1/3 NH3 liquid pumps (combined with the intermediate pressure separator)
• Horizontal intermediate pressure separator 640Ltr -6°C coupled to a plate cooler/ heat exchanger for natural circulation, ± 130kW to be used for glycol cooling if necessary (combined with the low pressure separator)
• Güntner air-cooled condenser type AGVH 090.1C/4-M
• Custom made control box with new Siemens PLC/Simatic touchscreen
• All necessary certificates for PED
• Cool technical and electrical drawings
• Custom made Software
Mentioned cooling capacity of is with the refrigerant R717 at -40°C/ +40°C.
|
|
2006 |
|
More information |
| Daikin |
|
ERAD 170 E-SS012 used condensing unit, type of refrigerant: R134A |
|
165 kW |
|
Used almost new: Complete Daikin condensing unit for outdoor installation type ERAD-170 E-SS012. Equipped with control box, Daikin mono screw type HSA312QS6YA 400/460V, 50/60 Hz with stepless capacity control. Mentioned Cooling capacity is with the refrigerant R134a at a temperature of 0 °C evaporation, capacity at-10 °C the evaporation temperature will be approx. 85kW.
|
|
2014 |
|
More information |
| Grasso/GEA |
|
3xM2MK2MB5 used freeze pump installation, type of refrigerant: R717/Ammonia |
|
250 kW |
|
Used and in very good maintained condition: Grasso/GEA freeze-pump installation. This freezing installation will be composed of the following main components by Comron International: 1 piece Grasso/GEA screw package type MR-M368-28, year of manufacture 2011 with Schorch 110kW E-motor, vertical oil separator, thermo siphon oil cooler without oil pump (circulation through discharge pressure) with eco, 1 piece Grasso/GEA screw package type MR-M2655S-28, year of manufacture 2015 with Dutchi 200kW E-motor( it can also be replaced with a 110kW E-motor), vertical oil separator, thermo siphon oil cooler shell & tube type without oil pump (circulation through discharge pressure) with eco. Furthermore, this installation will be delivered with custom made switch-board cabinet with new Siemens PLC 1200 serial/touchscreen, software and E- diagram, air-cooled or evaporating condenser optional, low pressure separator of -40°C with a volume of 2m3, with 2 pieces NH3 liquid pumps, eco tank, all required valves, Danfoss PM control stations, floaters, P&ID drawings.
|
|
2011/2015 |
|
More information |
| Grasso/GEA |
|
2X MB-3B freeze pump installation, type of refrigerant: Ammonia/R717 |
|
305 kW |
|
Used and in very good condition Grasso/GEA freeze-pump installation (always maintained by GEA). This installation will be composed of the following main components by Comron International:
• 2 pieces of Grasso/GEA screw package type M3 / year 2004. Serial number unit 1 : M0715. Serial number unit 2 : M0716.
• Each screw package/unit equipped with a Schorch E-motor of 132kW
• Vertical oil separator with thermo siphon-oil cooler without oil pump (circulation by discharge pressure)
• Siemens S7 controller
• Low pressure separator -40°C / 1.4 m³ brand ISLAS with 2 pieces of hermetic liquid pumps brand WITT
• Eco tank -10°C / 409 liter brand ISLAS
• High pressure receiver tank 833 liters brand ISLAS
• Custom-made switch box Siemens S7 PLC with Simatic touchscreen and 2 pieces new Yaskawa frequency controllers
• Balitmore or Evapco evaporating condenser of choice
The complete Grasso/GEA industrial freeze pump installation will be delivered with all required pressure certificates (PED).
Mentioned cooling capacity is with the refrigerant R717 at-40°C /+35°C, eco, 60Hz, 3600RPM.
|
|
2004 |
|
More information |
| Bitzer / Heplman |
|
used cooling installation, type of refrigerant: R507 |
|
373 kW |
|
Used and in very well maintained condition: complete Bitzer / Heplman cooling installation for processing rooms and or corridors consists of the following main components: bulit in a 10 ft container for outdoor installation, Bitzer cooling station is equipped with 3 pieces 6F-50.2Y compressors oil separator, switch-board, liquid tank, Helpman / Alfa-Laval air-cooled condenser type HTC-100-253-410-CT-400V and 15 pieces Helpman double-sided Thor-D-436-7-L-42 / 5-220V evaporators. Mentioned cooling capacity is at an evaporating temperature of 0 ° C. Installation will delivered with a P&ID drawing and the necessary certificates.
|
|
2005 |
|
More information |
| Bitzer / Goedhart |
|
used cooling installation, type of refrigerant: R507 |
|
435 kW |
|
Used and in very well maintained condition: complete Bitzer/Goedhart cooling installation for processing rooms and or corridors consists of the following main components: built in a 10 ft isolated container for outdoor installation, Bitzer cooling station is equipped with 3 pieces 6F-50.2Y compressors oil separator, switch-board, Goedhart air-cooled condenser type KOAL-M-4890D-8B, with 8 ventilators each 1.75 kW and 13 pieces Goedhart double-sided evaporators, type DVS 42636. Mentioned cooling capacity is at an evaporating temperature of + 4°C and at a condensing temperature of +40°C.
|
|
2002 |
|
More information |
| Sabroe |
|
used freeze-pump installation, type of refrigerant: R717/Ammonia |
|
441 kW |
|
Used and in very good condition (only 18000 running hours) industrial Sabroe freeze-pump installation. This installation will be composed of the following main components by Comron International:
• 2 pieces screw package/unit type SAB 81.
• Each screw package/unit equipped with a Schorch 250kW E-motor.
• Oil separator.
• Water-cooled oil cooler.
• Unisab II controller
• Switchbox with new YASKAWA frequency controllers.
• Water-cooled condenser (type plate & shell) coupled to a Baltimore open cooling tower
(If desired, it can be also delivered with an air cooled condenser or an evaporating condenser your choice).
• Eco with an open intercooler (vessel).
• Surge drum (approx.. ± 3m³) with two NH3/ammonia Hermetic/Witt liquid pumps.
The complete Sabroe freeze pump installation will be delivered with all required PED/TüV certificates, P&ID/ electrotechnical drawings.
Mentioned cooling capacity is with the refrigerant R717 at-40°C /+35°C, eco, 60Hz /3600RPM.
|
|
2005 |
|
More information |
| Grasso/GEA |
|
used cool-/freeze pump installation, type of refrigerant: R717/Ammonia |
|
459 kW |
|
Used Grasso/GEA cool-/freeze pump installation, this cool-/freeze pump installation has always been maintained by GEA and is equipped with the following main components: 3 pieces Grasso/GEA screw compressors type P-527 with 250 kW Schorch E-motor each (if desired it also can be replaced by smaller E-motors), water-cooled oil coolers, plate type, oil pump. Furthermore, this installation will be equipped with a custom made switchboard cabinet with new Siemens S7 PLC/touchscreen 1200 serial, software and E- diagrams, low pressure separator with 2 pieces ammonia liquid pumps, eco drum, all required valves, Danfoss PM control stations, floaters, P&ID drawings and air-cooled condensers. For warm countries we can also offer this installation with an evaporating condenser at choice. Mentioned cooling capacity with the refrigerant R717 is at an evaporating temperature of -40°C with eco and +35°C condensing. Cooling capacity at an evaporating temperature of -30°C with 3 pieces P - compressors is 754 kW, absorbed power 394 kW. Cooling capacity at an evaporating temperature of -10°C with 3 pieces P - compressors is 1569 kW with an absorbed power of 450 kW.
|
|
1997 |
|
More information |
| Howden/Goedhart |
|
freezing/blast freeze installation, type of refrigerant: R717/Ammonia |
|
466 kW |
|
Used and in very good maintained condition complete Howden/Goedhart freezing/blast freeze installation with a freezing capacity of approx.. 5.000kg/h which depends on the type of product. This complete freezing/blast freeze installation will be composed of the following main components by Comron International:
• 2 pieces Howden screw compressors/package, compressor type MK6B/WRV20414550/679
• Each screw package/unit equipped with Leroy-Somer 200kW E-motor, water-cooled shell&tube oil cooler, vertical oil separator, oil pump, closed intercooler eco, control box with new Siemens S7 PLC/Simatic touchscreen
• Low pressure separator -40°C brand Cofrin volume 3,5m3 built on frame with 2 pieces Hermatic CAM 2/3 ammonia liquid pumps
• High pressure liquid tank brand Cofrin volume 1,5m3
• Oil cooling through Baltimore cooling tower type VFL 241 HXR
• 2 pieces Goedhart PLK.S standing blast/freezing evaporators, completely made of stainless steel and equipped with seaworthy aluminum fins(fin space in 28mm, out 7mm), hot gas defrost in drip tray and evaporator block and 4 pieces Nuaire high pressure ventilators
• Evapco evaporating condenser type LSCB-185
• Custom made switch-box with new Siemens S7 PLC/Simatic touchscreen, Siemens soft starters for the 200kW E-motors and new software
• Software en E-schema's
• All requested valves, Danfoss control stations, floaters, P&ID drawings, E-drawings and PED pressure certificates
Mentioned cooling capacity is with the refrigerant R717 at-40°C /+35°C with eco, absorbed power approx.. 350kW.
This installation is very suitable for blast freezer room to freezing meat products in carton boxes.
|
|
2006/2016 |
|
More information |
| Gram / Frick |
|
freeze pump installation, type of refrigerant: NH3 Ammonia |
|
500 kW |
|
In good condition and very well maintained: complete ammonia NH3 freeze pump installation, consisting of the following main components: 1x Gram GSVII-111 screw compressor package (year 1998 with a 250kW Schorch E-motor) and 1x Gram GSV-147 screw compressor package (year 2002 with a 250kW Leroy Somer E-motor), both complete with oil separators, oil coolers and Gram processors. Vertical low pressure -40°C separator 6 m3, Öko receiver 482 Ltr., high pressure tank, switch-board with Siemens PLC and a Baltimore evaporative condenser, capacity 950kW.
|
|
1998/2002 |
|
More information |
| GEA/Grasso |
|
used complete industrial air-cooled water chiller, type of refrigerant: R717/Ammonia |
|
509 kW |
|
Used Grasso/GEA Complete Industrial Air-cooled Water Chiller / Cooling Installation. This in condition as new complete industrial air-cooled water chiller / cooling installation is equipped with the following main components:
• On Frame-built 2 pieces of Grasso piston compressors type 610, each with 75kW Leroy-Somer E-motors
• Vertical oil separator
• 2 pieces Vahterus plate & shell cooler/heat exchanger, type PSHE 6HH-234/1/1 – PSHE 3LL-60/3/1
• Low pressure separator brand EM Polar with a capacity of 1.990 liter for natural circulation
• Expansion tank
• 2 pieces of Water/Glycol pumps, brand Grundfos
• Complete control cabinet with Siemens PLC with soft starter for the compressors
• Evapco evaporating condenser, type ATC-M170E-1G
• 4 pieces Thermofin double-sided water/glycol coolers type X-TGDN 063.1-E-3-7-E with each 3 pieces ventilators and electrical defrost with a cooling capacity of 30kW at a water/glycol temp. -8°C/-3°C per cooler
• 5 pieces Thermofin double-sided water/glycol coolers type TGDN 065.1-E-3-7 with each 3 pieces ventilators and electrical defrost with a capacity of 75kW at water/glycol temp. -8°C/-3°C per cooler
• 1 piece Goedhart water/glycol cooler type VRB-62507 with each 2 pieces ventilators and a capacity of 29,7kW at a water/glycol temp. -8°C/-1,4°C
• 1 piece Küba water/glycol cooler type DFB 052C with each 2 pieces ventilators and a capacity of 7,6kW at water/glycol temp. -8°C/+10°C
• All required pressure certificates
The mentioned cooling capacity is with refrigerant R717/ammonia at an evaporating temperature of -10°C at a water/glycol outlet temperature of -5°C.
|
|
2010 |
|
More information |
| Grasso |
|
/GEA SP2 ZE-6BN used freeze pump installation, type of refrigerant: R717/Ammonia |
|
552 kW |
|
Used: Grasso/GEA freeze pump installation with a freeze capacity at an evaporating temperature of -40°C and a condensation temperature of +35°C of 578kW. This in a very good condition freeze pump installation (compressors + E-motros complete overhauled and will be delivered with 1 year guarantee) consists of the following main components: on frame built two-stages screw compressors consist of a low pressure (booster) type ZR is coupled to a160kW Schorch E-motor and a high pressure compressor type RR is coupled to a 200kW Schorch E-motor, one central oil separator, thermosyphon oil cooler,. Switch-board cabinet with starter packages and Siemens S7 PLC/touchscreen. Low pressure separator 3m3 with 2 pieces ammonia liquid pumps, eco tank, high pressure liquid tank, Installation will be delivered with all necessary certificates.
|
|
2002 |
|
More information |
| Grasso/GEA |
|
used refrigerator/freezer package, type of refrigerant: R717/Ammonia |
|
556 kW |
|
Used and in very good condition: Grasso/GEA refrigerator/freezer package consisting of the following main components: two pieces on frame built (DUO) G1 screw compressors of which one screw compressor equipped with a 75 kW E Schorch-engine and one with a 97 kW E-Motor (frequency controlled) Central oil separator, thermos chiffon, oil cooler. Furthermore, this well maintained package is equipped with a control cabinet and with a Siemens S7 PLC with touch screen built by Comron. The control box is equipped with a frequency controller brand Danfoss. Low pressure separator (surge drum) brand Polar 2.1 m³, 2 pieces ammonia liquid pumps, all required pressure test certificates and evaporative condenser to choice. 556 kW cooling capacity is listed with the refrigerant Ammonia at an evaporation temperature of-8 °C. Cooling capacity at-40 °C evaporating temperature is 130 kW.
|
|
2004 |
|
More information |
| Sabroe |
|
Johnson Controls 3xSAB151-E used freezing pump installation, type of refrigerant: R717/Ammonia |
|
580 kW |
|
Used and in very good condition (only 21910 operating hours per compressor) industrial Sabroe freeze-pump installation. This installation will be composed of the following main components by Comron International:
• 3 pieces Sabroe screw packages/units type SAB 151-E
• Each screw package/unit equipped with a ABB E-motor of 200kW
• Oil separator
• Oil cooling through electronic fluid injection
• Unisab III controller
• Switch-box with Danfoss frequency controllers
• Custom made switch-box with an option for a Siemens S7 PLC/touchscreen 1200 serial
• Software en E-schema's
• Low pressure separator (-40°C tank) with 2 pieces ammonia liquid pumps
• Eco tank
• All requested valves, Danfoss PM control stations, high/low pressure floaters, P&ID drawings
• Baltimore or Evapco evaporating condenser of your choice.
Mentioned cooling capacity is with the refrigerant R717 at-40°C /+35°C, eco, 60Hz /3600RPM with a volume flow rate per compressor of 1028m3/h.
|
|
2008 |
|
More information |
| Gram / Frick |
|
industrial freezing pump installation, type of refrigerant: NH3/Ammonia |
|
600 kW |
|
Used in very good maintained condition Gram/Frick industrial freezing pump installation and consists of the following main components:
2 x low pressure Frick screw packages, type TDSH 233S and type GSVII 147, year 2003, (cooling capacity at -40°/-12°C is 600 kW)
Each low pressure screw package equipped with:
Leroy Somer E-motor of 90 kw
New Siemens PLC / Simatic touchscreen
2 x high pressure Frick screw packages, type TDSH 163L and type GSVII-64, year 2003 (cooling capacity at -12°/+42°C is 750 kW)
Each high pressure screw package equipped with:
Leroy Somer E-motor of 160 kw
New Siemens PLC / Simatic touchscreen
All screw packages are equipped with water/glycol oil coolers, plate type
Switch-board with Siemens S7 controller
Stahlbau low pressure / medium pressure separators -40°C/-12° combined, 4,8m3/3,6m3 volume, complete with 2 pieces Hermetic cam 2/3 liquid pumps, motor 1,5kW
Güntner (water/glycol) air-cooled oil cooler (for outside application) is connected to the water-cooled oil coolers of the compressors
2 x Güntner AGV-H10132x5S (D) air-cooled condensers, each 410 kW at condensing temp. +42°C (If desired, it can be also delivered with an evaporating condenser)
All TüV certificates
Mentioned cooling capacity of 600kW is with the refrigerant R717 at-40°C /+35°C.
|
|
1998 / 2003 |
|
More information |
| Grasso/GEA |
|
2xV used freeze pump installation, type of refrigerant: R717 /Ammonia |
|
676 kW |
|
Used and in very good maintained condition: Grasso/GEA freeze-pump installation. This freezing installation will be composed of the following main components by Comron International: 1 piece Grasso/GEA screw package type VR, year of manufacture of frame 1996, compressor block 2013, Schroch 450kW E-motor, vertical oil separator, water-cooled oil cooler, oil pump, eco connection. 1 piece Grasso/GEA screw package type V, year of manufacture of frame 1996, compressor block 2007, Schroch 450kW E-motor, vertical oil separator, water-cooled oil cooler, oil pump, eco connection. Furthermore, this installation will be delivered with custom made switch-board cabinet with new Siemens PLC 1200 serial/touchscreen, software and E- diagram, air-cooled or evaporating condenser optional, low pressure separator of -40°C with a volume of 4m3, with 2 pieces NH3 liquid pumps, eco tank, all required valves, Danfoss PM control stations, floaters, P&ID drawings.
|
|
1996/2007/2013 |
|
More information |
| Grasso / GEA |
|
used cooling installation, type of refrigerant: R717/Ammonia |
|
714 kW |
|
Used and in condition as new (very few running hours: C1:11000 hours, C2: 8190 hours, C3: 3200 hours): complete Grasso/Gea ammonia cooling installation consisting of the following manin components: 3 pieces Grasso/GEA piston package type 610, direct driven 1450 RPM, equipped with each a 75kW Leroy-Somer E-motor, oil separator, meter set, switch-board with Siemens S7 PLC with touch screen, surge drum with two pieces ammonia liquid pumps, air-cooled and/or evaporative condenser of your choice. The installation will be delivered with all necessary PED/TÜV certificates. Mentioned cooling capacity is with refrigerant R717 at -9°C evaporating temperature and +33°C condensing temperature.
|
|
2008 |
|
More information |
| Grasso |
|
/ GEA Frigopack SP2 used freeze pump installation, type of refrigerant: R717/Ammonia |
|
856 kW |
|
Used and in new condition. Built by Grasso / GEA for the firm JBT/Frigoscandia, a complete two-stage Frigopack freeze pump installation with a freeze capacity of 856kW at an evaporating temperature of -40°C and a condensation temperature of +35°C with the refrigerant R717 / Ammonia. The absorbed power is approx. 490kW with this condition. The installation consists of the following main components: GEA / Grasso two-stage screw package, type unit BETA E-6AT with serial number 7917 build in 2000 with a low pressure compressor (Booster) type XBR connected to a 250 kW Schorch E-motor and a high pressure compressor type SR connected to a 250 kW Leroy-Somer E-motor, a central oil separator, oil pump, thermosyphon oil cooler, switchboard with star/delta switches and a Siemens S7 PCL. First frame is equipped with a low pressure separator (Surge drum) made by the brand Armultra-LTD with a capacity of 7,1 m3 and 2 pieces hermetic ammonia liquid pumps. The second frame is equipped with a high pressure tank made by Armultra-LTD with a capacity of 980 liter, eco tank made by Armultra-LTD with a capacity of 3,7 m3 and a closed intercooler coupled to the suction side of -40°C for extra capacity / efficiency, volume 240ltr. This frame also contains a switchboard with a central Siemens S7 PLC Touch screen. This complete freeze installation will be delivered with a Baltimore / Evapco evaporating condenser of choose and all the necessary TÜV certificates. The Grasso screw compressors with E-motor completely overhauled by Comron International and will be delivered with one year guarantee.
|
|
2002 |
|
More information |
| Grasso / GEA Frigopack |
|
SP2 used freeze-pump installation, type of refrigerant: R717/Ammonia |
|
1460 kW |
|
Used and in new condition. Built by Grasso / GEA for the firm JBT/Frigoscandia, a complete two-stage Frigopack freeze pump installation with a freeze capacity of 1460 kW at an evaporating temperature of -40°C and a condensation temperature of +35°C with the refrigerant R717 / Ammonia. The absorbed power is approx. 689 kW with this condition. The installation consists of the following main components: two pieces GEA / Grasso two-stage screw package. First type unit ZE-6BN with serial number 8460 build in 2001/2002. Containing a low pressure compressor (Booster) type ZE connected to a 160 kW Schorch E-motor and a high pressure compressor type PR connected to a 200 kW Schorch E-motor, a central oil separator, oil pump, thermosyphon oil cooler, switchboard with star/delta switches and a Siemens S7 PLC. Second type unit BETA E-6AT with serial number 7917 build in 2000. Containing a low pressure compressor (Booster) type XBR connected to a 250 kW Schorch E-motor and a high pressure compressor type SR connected to a 250 kW Leroy-Somer E-motor, a central oil separator, oil pump, thermosyphon oil cooler, switchboard with star/delta switches and a Siemens S7 PCL. The first frame is equipped with a low pressure separator (Surge drum) made by the brand Armultra-LTD with a capacity of 7,1 m3 and 2 pieces hermetic ammonia fluid pumps. The second frame is equipped with a high pressure tank made by Armultra-LTD with a capacity of 980 liter, eco tank made by Armultra-LTD with a capacity of 3,7 m3 and a closed intercooler coupled to the suction side of -40°C for extra capacity / efficiency, volume 240ltr. This frame also contains a switchboard with a central Siemens S7 PLC Touch screen. This complete freeze installation will be delivered with a Baltimore / Evapco evaporating condenser of choose and all the desired TÜV certificates. The Grasso screw compressors with E-motor completely overhauled by Comron International and will be delivered with one year warranty.
|
|
2002 |
|
More information |