| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| Nuaire |
|
high pressure tube ventilators |
|
0 kW |
|
New (in crate), high pressure tube ventilators, various models and specifications, very suitable for various blast freeze applications.
|
|
Nieuw / New / Neu |
|
More information |
| Nuaire |
|
BT50M47GNP.75* high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications. Technical specifications: 6120 m³/h, at 100Pa discharge head, 1395RPM, E-motor 0,75kW, stainless steel housing, plastic plates.
|
|
|
|
More information |
| Nuaire |
|
SC800S43HY2-4 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø800
• Airflow 23.897 m³/h at 269Pa discharge head
• E-motor 4kW / 400/690V / 1450RPM
• Galvanized housing
• Plastic blades
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC630M46GX2-1.5 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø630
• Airflow 12.852 m³/h at 138Pa discharge head
• E-motor 1,5kW / 230/400V / 1430RPM
• Galvanized housing
• Plastic blades
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
ST900Z46GX+QA 15084 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 900mm
• Airflow 34150 m³/h at 291Pa discharge head
• E-motor 7,5kW / 400 / 460V / 3 phase / 50Hz / 60Hz / 1460RPM
• Stainless Steel housing
• Plastic blades
• Outer dimensions 1005mm / Depth 560mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
ST800 044GX+OGAT high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 800mm
• Airflow 23250 m³/h at 340Pa discharge head
• E-motor 4 kW / 400 / 460V / 50Hz / 60Hz / 1455RPM
• Stainless Steel housing
• Plastic blades
• Outer dimensions 910mm / Depth 480mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC800 P42 GX 4258 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 800mm
• Airflow 15250 m³/h at 322Pa discharge head
• E-motor 3kW / 400 / 460V / 50Hz / 60Hz / 1460RPM
• Galvanized Steel housing
• Plastic blades
• Outer dimensions 910mm / Depth 490mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC800N44GX-0EA6 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 800mm
• Airflow 23750 m³/h at 29Pa discharge head
• E-motor 2,2kW / 400 / 460V / 50Hz / 60Hz / 1460RPM
• Galvanized Steel housing
• Plastic blades
• Outer dimensions 910mm / Depth 535mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC900AA-44GX+0J5 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 900mm
• Airflow 29921m³/h at 460Pa discharge head
• E-motor 7,5kW / 400 / 460V / 50Hz / 60Hz / 1455RPM
• Galvanized Steel housing
• Plastic blades
• Outer dimensions 1016mm / Depth 660mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC1000KY51GX+4415 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze application.
Technical specifications:
• Ø 1000 mm
• Airflow 32.334 m³/h at 401Pa discharge head
• E-motor 7.5kW / 400/460V / 50/60hz 1455RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 1106 mm / Depth 570 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC710S43GX-0G high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 710mm
• Airflow 15500 m³/h at 310 Pa discharge head
• E-motor 4 kW / 400 / 460V / 50Hz / 60Hz / 1455RPM
• Galvanized Steel housing
• Plastic blades
• Outer dimensions 814mm / Depth 470mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC630AA46GX-0F6T high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze application.
Technical specifications:
• Ø 630 mm
• Airflow 16.393 m³/h at 193Pa discharge head
• E-motor 3kW / 400/460V / 50/60hz 1455RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 740 mm / Depth 535 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC630P45GX-OEA-R high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze application.
Technical specifications:
• Ø 630 mm
• Airflow 14.208 m³/h at 163Pa discharge head
• E-motor 2.2kW / 400/460V / 50/60hz 1455RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 740 mm / Depth 490 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
MC710FE43GX-0E high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze application.
Technical specifications:
• Ø 710 mm
• Airflow 14.084 m³/h at 242Pa discharge head
• E-motor 2.2kW / 400/460V / 50/60hz / 1455RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 814 mm / Depth 490 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC710O45GX-0EM5 high pressure tube ventilator |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze applications.
Technical specifications:
• Ø 710mm
• Airflow 16000 m³/h at 201 Pa discharge head
• E-motor 2,2 kW / 400 / 460V / 50Hz / 60Hz / 1455RPM
• Galvanized Steel housing
• Plastic blades
• Outer dimensions 814mm / Depth 385mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
ST710P44GX-0FAU high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 710mm
• Air flow 17.571 m³/h at 213Pa discharge head
• E-motor 3kW / 400/460V / 3 phase / 50/60hz 1460RPM
• Stainless steel housing
• Plastic blades
• Outer dimensions 803 mm / Depth 570 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
MC1000KZ41GX-0F high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze application.
Technical specifications:
• Ø 1000 mm
• Airflow 20.000 m³/h at 288Pa head
• E-motor 3kW / 400/460V / 3 phase / 50/60hz 1460RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 1106 mm / Depth 585 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
MT900GQ52GX+0PA6WT high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube ventilators, very suitable for various blast freeze application.
Technical specifications:
• Ø 900 mm
• Air flow 27,619 m³/h at 311Pa discharge head
• E-motor 5.5kW / 400/460V / 3 phase / 50/60hz 1460RPM
• Stainless steel housing
• Plastic blades
• Outer dimensions 1005 mm / depth 592 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC710Z44GX-0FA high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 710mm
• Air flow 17.462 m³/h at 211Pa discharge head
• E-motor 3kW / 400/460V / 3 phase / 50/60hz / 1460RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 803 mm / depth 490 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC900Z42GX-0GA high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 900mm
• Air flow 26.739 m³/h at 212Pa discharge head
• E-motor 4kW / 400/460V / 3 phase / 50/60hz / 1460RPM
• Stainless steel housing
• Plastic blades
• Outer dimensions 1005 mm / depth 480 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC800S42GX-0G high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 800mm
• Air flow 18.652 m³/h at 305Pa discharge head
• E-motor 4kW / 400/460V / 3 phase / 50/60hz / 1460RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 904 mm / depth 470 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC630O46GX-0EA high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 630mm
• Air flow 13.731 m³/h at 161Pa discharge head
• E-motor 2.2kW / 400/460V / 3 phase / 50/60hz / 1460RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 726 mm / depth 490 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC112LC4HGX-0MA5 high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 1120mm
• Air flow 47.874 m³/h at 485Pa discharge head
• E-motor 7.5kW / 400/460V / 3 phase / 50/60hz / 1460RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 1240 mm / depth 750 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Nuaire |
|
SC800O44GX3848 high pressure tube ventilators |
|
kW |
|
New (in crate), high pressure tube fans, very suitable for various freezing application.
Technical specifications:
• Ø 800mm
• Air flow 21,823 m³/h at 300Pa discharge head
• E-motor 3kW / 400/460V / 50/60hz 1460RPM
• Galvanized housing
• Plastic blades
• Outer dimensions 803 mm / depth 570 mm with motor
|
|
Nieuw/New/Neu |
|
More information |
| Küba / GEA |
|
DFA 011D cool evaporator, type of refrigerant: R507/All Freon |
|
0.44 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cooling evaporator for Freon DX model is equipped with 1 piece 50Hz 1Ph ventilator motor 29W / 1310RPM, total air flow of this cooling evaporator 250m3/h, air throw 5m, fin space 4.5mm. Mentioned cooling capacity of 0.44kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -18°C approx. 0.35kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DFBE 021D cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
0.46 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool-/freeze evaporator for Freon DX model is equipped with 1 piece 50Hz 1Ph ventilator motor 29W / 1310RPM, electrical defrost in evaporator block with a total absorbed power of 0.42kW, total air flow of this cool-/freeze evaporator 290m3/h, air throw 5m, fin space 7mm. Mentioned cooling capacity of 0.59kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -18°C approx. 0.47kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DFB 021D cool evaporator, type of refrigerant: R507/All Freon |
|
0.46 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool evaporator for Freon DX model is equipped with 1 piece ventilator motor 50Hz / 29W / 1310RPM, total air flow of this cool evaporator 320m3/h, air throw 5m, fin space 7mm. Mentioned cooling capacity of 0.46kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -18°C approx. 0.36kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DFBE 031D cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
0.59 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool-/freeze evaporator for Freon DX model (max. operating pressure 60 bar) is equipped with 1 piece 50Hz 1Ph ventilator motor 29W / 1310RPM, electrical defrost in evaporator block with a total absorbed power of 0.42kW, total air flow of this cool-/freeze evaporator 290m3/h, air throw 5m, fin space 7mm. Mentioned cooling capacity of 0.59kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -18°C approx. 0.47kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DFB 031D cool evaporator, type of refrigerant: R507/All Freon |
|
0.59 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool evaporator for Freon DX model is equipped with 1 piece ventilator motor 50Hz / 29W / 1310RPM, , total air flow of this cool evaporator 290m3/h, air throw 5m, fin space 7mm. Mentioned cooling capacity of 0.59kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -18°C approx. 0.47kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPBE 23-F31 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.2 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/30W/1580RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 0.9kW, total air flow of 890m3/h, air throw 7m, fin space 7mm. Mentioned cooling capacity of 1.2kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 0.8W. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 021D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
1.2 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 1 piece 50Hz 1Ph ventilator motor 48W / 1375RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.16kW, total air flow of this cool-/freeze evaporator 780m3/h, air throw 6m, fin space 7mm. Mentioned cooling capacity of 1.2kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 0.26kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 0.44kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DEB 071D cool evaporator, type of refrigerant: R507/All Freon |
|
1.4 kW |
|
New: still in the original package: Küba / GEA one sided blowing cool evaporator for Freon DX model (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz / 72W / 1350RPM, total air flow of this cool evaporator 1280m3/h, air throw 10m, fin space 7mm. Mentioned cooling capacity of 1.4kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 1.1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DFBE 051D cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
1.5 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool-/freeze evaporator for Freon DX model is equipped with 1 piece 50Hz 1Ph ventilator motor 75W / 1350RPM, electrical defrost in evaporator block with a total absorbed power of 1.1kW, total air flow of this cool-/freeze evaporator 1070m3/h, air throw 9m, fin space 7mm. Mentioned cooling capacity of 1.45kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 1.06kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGBE 30-F21 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
1.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz/65W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.2kW, total air flow of 1550m3/h, air throw 17m, fin space 7mm. Mentioned cooling capacity of 1.5kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1W. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEBE 071D V1.50 DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/72W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.5kW, total air flow of 1280m3/h, air throw 10m, fin space 7mm. Mentioned cooling capacity of 1.5kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1.2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFB 051D DECKEN cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator CO2/Freon DX application (max. operating pressure 60 bar) is equipped with 1 piece ventilator motor 50Hz/75W/1350RPM, total air flow of 1070m3/h, air throw 9m, fin space 7mm. Mentioned cooling capacity of 1.5kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 1.1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEB 071D DECKEN cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 1 piece ventilator motor 50Hz/75W/1350RPM, total air flow of 1280m3/h, air throw 10m, fin space 7mm. Mentioned cooling capacity of 1.5kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1.2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGA 23-F31 HOCHLEISTUNGS cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.7 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/30W/1580RPM, total air flow of 900m3/h, air throw 11m, fin space 4.5mm. Mentioned cooling capacity of 1.7kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DEB 081D cool evaporator, type of refrigerant: R507/All Freon |
|
1.7 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool evaporator for Freon DX model is equipped with 1 piece ventilator motor 50Hz / 72W / 1350RPM, total air flow of this cool evaporator 1220m3/h, air throw 10m, fin space 7mm. Mentioned cooling capacity of 1.7kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 1.3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEBE 081D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.8 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/72W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2,1kW, total air flow of 1220m3/h, air throw 10m, fin space 7mm. Mentioned cooling capacity of 1,8kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1,4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 061D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
1.8 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 1.2kW, total air flow of 1300m3/h, air throw 11m, fin space 7mm. Mentioned cooling capacity of 1.8kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 1.5kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPA 23-F21 cool evaporator, type of refrigerant: R404A/All Freon |
|
1.9 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz/30W/1580RPM, air flow of 900m3/h, air throw 7m, fin space 4mm. Mentioned cooling capacity of 1.9kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 1.3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGBE 022D cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
1.9 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motors each 50Hz /48W / 1375RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.1kW, total air flow of this cool-/freeze evaporator 1560 m3/h, air throw 11 m, fin space 7mm. Mentioned cooling capacity of 1.9kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity is with refrigerant R404a at evaporating temperature -25°C approx.. 1.4kW. Evaporator will be delivered with PED pressure certificate and CE declaration.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 031D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
1.9 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 1 piece 50Hz 1Ph ventilator motor 89W / 1358RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.38kW, total air flow of this cool-/freeze evaporator 1730 m3/h, air throw 8m, fin space 7mm. Mentioned cooling capacity of 1.9kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 0.5kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx.. 1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 071D V7.45 SONDER cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
2.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/75W/1350RPM, electrical defrost in evaporator block with a total absorbed power of 1,2kW, total air flow of this cool-/freeze evaporator 1130m3/h, air throw 11m, fin space 7mm. Mentioned cooling capacity of 2,1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity is with refrigerant R404a at evaporating temperature -8°C approx.1,8kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SPB 23-F32 cool evaporator, type of refrigerant: R507/All Freon |
|
2.2 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool evaporator for Freon DX model (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motor each 50Hz / 30W / 1580RPM, total air flow of this cool evaporator 1780m3/h, air throw 12m, fin space 7mm. Mentioned cooling capacity of 2.2kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 1.6kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPB 23-F32 cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
2.3 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator for CO2/Freon DX application (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motors each 50Hz/30W/1580RPM, total air flow of 1780m3/h, air throw 12m, fin space 7mm. Mentioned cooling capacity of 2.3kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1.7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba/GEA |
|
DEA 091D PR V1.33 new cool evaporator, type of refrigerant: R404A/All Freon |
|
2.3 kW |
|
New (still in the original package) one-sided blowing cooling evaporator brand Küba/GEA type DEA 091D PR V1.33. This new one-sided blowing cooling evaporator is equipped with:
• 1 piece ventilator, 1350RPM/72W
• Air flow 1.035 m3/h
• Fin space 4,5 mm
• Air throw 9 m
• Block volume 4,2 dm3
Mentioned cooling capacity is with refrigerant R404a at a evaporating temp. of -8°C with ΔT8K.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGLE 35-F31 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
2.4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/150W/1430RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.1kW, total air flow of 3070m3/h, air throw 31m, fin space 12mm. Mentioned cooling capacity of 2.4kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 1.7W. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 35-F21 Cool-/Freeze Evaporator, type of refrigerant: R507/All Freon |
|
2.4 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for Freon DX model (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz / 150W / 1430RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.5kW, total air flow of this cool-/freeze evaporator 3020m3/h, air throw 31m, fin space 7mm. Mentioned cooling capacity of 2.4kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx.1.5kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 022D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
2.4 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces 50Hz 1Ph ventilator motor each 48W / 1375RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2kW, total air flow of this cool-/freeze evaporator 1560 m3/h, air throw 11 m, fin space 7mm. Mentioned cooling capacity of 2.4kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 1.1kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 1.6kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
New / Nieuw/ Neu |
|
More information |
| Küba / Kelvion |
|
SGLE 30-F32 cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
2.8 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/65W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3.1kW, total air flow of 3140m3/h, air throw 22m, fin space 12mm. Mentioned cooling capacity of 2.8kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DEBE 072D cool-/freeze evaporator, type of refrigerant: R507/CO2/All Freon |
|
2.9 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool-/freeze evaporator for Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces 50Hz 1Ph ventilator motor each 72W / 1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.5kW, total air flow of this cool-/freeze evaporator 2560m3/h, air throw 12m, fin space 7mm. Mentioned cooling capacity of 2.9kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 2.3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard. Note: Coils are stainless steel.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 052D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
2.9 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 1,8kW, total air flow of 2140m3/h, air throw 11m, fin space 7mm. Mentioned cooling capacity of 2,9kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 2,2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 052D V7.32 SONDER cool-/freeze evaporator,type of refrigerant: R404A/All Freon |
|
2.9 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 1,8kW, total air flow of 2140m3/h, air throw 11m, fin space 7mm. Mentioned cooling capacity of 2,9kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 2,2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SPA 30-F21 cool evaporator, type of refrigerant: R507/All Freon |
|
3 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool evaporator for Freon DX model (max. operating pressure 32 bar) is equipped with 1piece ventilator motor 50Hz / 65W / 1360RPM, total air flow of this cool evaporator 1540m3/h, air throw 10m, fin space 4mm. Mentioned cooling capacity of 3kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C approx. 2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard. Note: Protective coating on fins, end plates, casing.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPBE 30-F22 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404/All Freon |
|
3 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motors each 50Hz/65W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2kW, total air flow of 3320m3/h, air throw 17m, fin space 7mm. Mentioned cooling capacity of 3kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2,1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEBE 072D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
3.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/72W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2,5kW, total air flow of this cool-/freeze evaporator 2560m3/h, air throw 12m, fin space 7mm. Mentioned cooling capacity of 3,1kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity is with refrigerant R404a at evaporating temperature -25°C approx. 2,4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGLE 35-F41 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
3.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz/150W/1430RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.8kW, total air flow of 3030m3/h, air throw 31m, fin space 12mm. Mentioned cooling capacity of 3.1kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2.2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFA 061D DECKEN cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
3.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/75W/1350RPM, total air flow of 1100m3/h, air throw 11m, fin space 4,5mm. Mentioned cooling capacity of 3.1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGB 35-F31 cool evaporator, type of refrigerant: R507/All Freon |
|
3.2 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool evaporator for Freon DX model (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz / 150W / 1430RPM, total air flow of this cool evaporator 2950m3/h, air throw 30m, fin space 7mm. Mentioned cooling capacity of 3.2kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx.2.2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPB 23-F33 HOCHLEISTUNGS cool evaporator, type of refrigerant: R404A/All Freon |
|
3.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator is equipped with 3 pieces ventilator motors each 50Hz/30W/1580RPM, total air flow of 2670m3/h, air throw 16m, fin space 7mm. Mentioned cooling capacity of 3,5kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2,5kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 062D V7.32 SONDER cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
3.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 2,1kW, total air flow of 2600m3/h, air throw 13m, fin space 7mm. Mentioned cooling capacity of 3,5kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 2,9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 062D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
3.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 2,1kW, total air flow of 2600m3/h, air throw 13m, fin space 7mm. Mentioned cooling capacity of 3,5kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 2,9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEBE 082D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
3.6 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 piece ventilator motors each 50Hz/72W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3,7kW, total air flow of 2440m3/h, air throw 12m, fin space 7mm. Mentioned cooling capacity of 3,6kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2,9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard. Note: Coils are stainless steel.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DPB 031C cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
3.69 kW |
|
New: still in the original package: Küba/Kelvion double-sided blowing cool evaporator for CO2/Freon DX application (max. operating pressure 45 bar)is equipped with 1 piece ventilator motor 50Hz/185W/1320RPM, total air flow of this cool evaporator 1720m3/h, air throw 2x11m, fin space 7mm. Mentioned cooling capacity of 3.69kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity is with refrigerant R404a at evaporating temperature -8°C 5.41kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEAE 072D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
3.8 kW |
|
New: still in the original package: Küba/Kelvion one sided blowing cool-/freeze evaporator (max. operating pressure 16 bar) is equipped with 2 pieces ventilator motors each 50Hz/72W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.5kW, total air flow of 2200m3/h, air throw 11m, fin space 4,5mm. Mentioned cooling capacity of 3.8kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DFB 072D cool evaporator, type of refrigerant: R507/All Freon |
|
3.9 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool evaporator for Freon DX model (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motors each 50Hz / 75W / 1350RPM, total air flow of this cool evaporator 2260m3/h, air throw 13m, fin space 7mm. Mentioned cooling capacity of 3.9kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 3.4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 061D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
4 kW |
|
New: still in the original package: Küba / GEA one sided suction cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 1 piece ventilator motor 126W / 953RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.85kW, total air flow of this cool-/freeze evaporator 1990 m3/h, air throw 9 m, fin space 7mm. Mentioned cooling capacity of 3.5kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 2.3kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx.. 2.2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPBE 35-F41 cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator is equipped with 1 piece ventilator motor 50Hz/145W/1430RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.2kW, total air flow of 2820m3/h, air throw 18m, fin space 7mm. Mentioned cooling capacity of 4kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2.9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPBE 30-F32 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/65W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2kW, total air flow of 3180m3/h, air throw 16m, fin space 7mm. Mentioned cooling capacity of 4kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2.9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGLE 45-F31 HOCHLEISTUNGS cool-/freeze evaporator, type of refrigerant: R404/ACO2/All Freon |
|
4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX application (max. operating pressure 45 bar) is equipped with 1 piece ventilator motor 50Hz/275W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3.5kW, total air flow of 5220m3/h, air throw 44m, fin space 12mm. Mentioned cooling capacity of 4kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 2.7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SPB 30-F32 cool evaporator, type of refrigerant: R404A/All Freon |
|
4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motors each 50Hz/65W/1360RPM, total air flow of 3180m3/h, air throw 16m, fin space 7mm. Mentioned cooling capacity of 4kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 2,9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFBE 072D V7.45 SONDER cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
4.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 2,1kW, total air flow of 2260m3/h, air throw 13m, fin space 7mm. Mentioned cooling capacity of 4,1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 3,5kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DEA 082D cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
4.2 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors 50Hz/72W/1350RPM, total air flow of 2140m3/h, air throw 11m, fin space 4.5mm. Mentioned cooling capacity of 4.2kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 3.3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DPA 041C DECKEN Cool Evaporator, type of refrigerant: R404A/All Freon |
|
4.26 kW |
|
New: still in the original package: Küba/Kelvion double-sided blowing cool evaporator (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz/185W/1320RPM, total air flow of this cool evaporator 1620m3/h, air throw 2x9m, fin space 4.5mm. Mentioned cooling capacity of 4.26kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity is with refrigerant R404a at evaporating temperature 0°C 6.26kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SPA 23-F32 cool evaporator, type of refrigerant: R507/All Freon |
|
4.5 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool evaporator for Freon DX model is equipped with 2 pieces ventilator motors each 50Hz / 30W / 1580RPM, total air flow of this cool evaporator 1740m3/h, air throw 12m, fin space 4mm. Mentioned cooling capacity of 4.5kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C approx. 3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SPAE 23-F32 cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
4.5 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for Freon DX model is equipped with 2 pieces 50Hz 1Ph ventilator motor each 30W / 1580RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 1.7kW, total air flow of this cool-/freeze evaporator 1780m3/h, air throw 12m, fin space 4mm. Mentioned cooling capacity of 4.5kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C approx. 3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba /Kelvion |
|
DEAE 092D cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
4.7 kW |
|
New: still in the original package: Küba/Kelvion one sided blowing cool-/freeze evaporator is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3,7kW, total air flow of 2070m3/h, air throw 11m, fin space 4,5mm. Mentioned cooling capacity of 4,7kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 3,7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 042D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
4.9 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces 50Hz 1Ph ventilator motor 89W / 1358RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.49kW, total air flow of this cool-/freeze evaporator 3320 m3/h, air throw 14m, fin space 7mm. Mentioned cooling capacity of 4.9kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 3.64kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 2.9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFA 052D DECKEN cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
5.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, total air flow of 1900m3/h, air throw 11m, fin space 4,5mm. Mentioned cooling capacity of 5,1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 3,4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Goedhart / Kelvion |
|
CCD 41304 cool evaporator, type of refrigerant: R404A/All Freon |
|
5.1 kW |
|
New: still in the original package: Goedhart / Kelvion one sided suction cool evaporator is equipped with 1 piece ventilator motor 90W/50Hz/1290RPM, total air flow 1393m3/h, air throw 8m, fin space 4mm, noise emission 42,7dB(A) at 3m. Mentioned cooling capacity of 5,1kW is with refrigerant R404A at an evaporating temperature 0°C. Cooling capacity at an evaporating temperature -8°C is 3,5kW.
|
|
2016 - Nieuw in originele verpakking / New, in the original package / Neu in Originalverpackung |
|
More information |
| Küba / Kelvion |
|
DFBE 063D DECKEN cool-/freeze evaporator, type of refrigerant: R404A/CO2/All Freon |
|
5.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 3 pieces ventilator motors each 50Hz/75W/1350RPM, electrical defrost in evaporator block with an absorbed power of 3kW, total air flow of 3900m3/h, air throw 15m, fin space 7mm. Mentioned cooling capacity of 5,1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 4,3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFB 063D cool evaporator, type of refrigerant: R404A/All Freon |
|
5.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator (max. operating pressure 32 bar) is equipped with 3 pieces ventilator motors each 50Hz/75W/1350RPM, total air flow of 3900m3/h, air throw 15m, fin space 7mm. Mentioned cooling capacity of 5,1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 4,3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFA 052D cool evaporator, type of refrigerant: R404A/All Freon |
|
5.1 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, total air flow of 1900m3/h, air throw 11m, fin space 4,5mm. Mentioned cooling capacity of 5,1kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 3,4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba/GEA |
|
SGBE 081C used cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
5.3 kW |
|
Used one-sided blowing (air out from the ventilator side) cooling/- freezing evaporator brand Küba/GEA type SGBE 081C. This in condition as new condition one-sided blowing cooling/- freezing evaporator is equipped with:
• 1 piece ventilator, 1360RPM/210W
• Air flow 2.770 m3/h
• Fin space 7 mm
• Air throw 20 m
• Block volume 8,9 dm3
• Surface 34,1 m2
• Electric defrost in coil (2,18kW) and drip tray (0,35kW)
Mentioned cooling capacity is with refrigerant R404a at a evaporating temp. of -8°C with ΔT8K. Cooling capacity at evaporating temp. of -25°C with ΔT7K is 4,3kW.
|
|
2005 |
|
More information |
| Küba / GEA |
|
SGBE 23-F35 cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
5.8 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for Freon DX model is equipped with 5 pieces 50Hz 1Ph ventilator motor each 30W / 1580RPM electrical defrost in evaporator block and drip tray with a total absorbed power of 3.7kW, total air flow of this cool-/freeze evaporator 4750m3/h, air throw 24m, fin space 7mm. Mentioned cooling capacity of 5.8kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 3.9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 081D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
6 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 1 piece 50Hz 1Ph ventilator motor 212W / 1382RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 2.5kW, total air flow of this cool-/freeze evaporator 3340 m3/h, air throw 10m, fin space 7mm. Mentioned cooling capacity of 6.35kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 4kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Goedhart |
|
DVS 42454 used water/glycol cooler, type of refrigerant: water/glycol |
|
6 kW |
|
Used dual-discharge blowing water/glycol cooler, brand Goedhart type DVS 42454. This in very good condition dual-discharge blowing water/glycol cooler is equipped with:
• 2 pieces ventilators each Ø450, 1360RPM, 0,27kW
• Air flow 10.490m3/h
• Fin space 4 mm
• Block volume 16 dm3
• Surface 101 m2
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of-3°C / +3°C and an air inlet temp. of +6°C.
|
|
2000 |
|
More information |
| Küba / GEA |
|
DFA 062D cool evaporator, type of refrigerant: R507/R404A/All Freon |
|
6.1 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool evaporator is equipped with 2 pieces ventilator motors each 50Hz / 75W / 1350RPM, total air flow of this cool evaporator 2200m3/h, air throw 13m, fin space 4.5mm. Mentioned cooling capacity of 6.1kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C approx. 3.9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFB 073D cool evaporator, type of refrigerant: R404A/All Freon |
|
6.2 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator (max. operating pressure 32 bar) is equipped with 3 pieces ventilator motors each 50Hz/75W/1350RPM, total air flow of 3390m3/h, air throw 15m, fin space 7mm. Mentioned cooling capacity of 6,2kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 5,3kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFA 062D DECKEN cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
6.3 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, total air flow of 2200m3/h, air throw 13m, fin space 4,5mm. Mentioned cooling capacity of 6,3kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 4,1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Kelvion |
|
KSC-303-4BE-HX32-1014.1 v6.01 new cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
6.77 kW |
|
New one-sided blowing cooling-/freezing evaporator, Kelvion type KSC-303-4BE-HX32-1014.1 v6.01 is equipped with:
• 3 pieces ventilators, each Ø300, 79W, 1600RPM
• Air flow 5.250m3/h
• Air throw 17m
• Fin spacing 7mm
• Electric defrosting in coil (2,6kW) and drip tray(1,3kW)
Mentioned cooling capacity of 6,77kW is with refrigerant R404a at an evaporating temp. of -8°C with ΔT8K.
|
|
Nieuwe / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 062D cool-/freeze evaporator, type of refrigerant: R744/All Freon |
|
6.78 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces 50Hz 1Ph ventilator motor 126W / 963RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3.1kW, total air flow of this cool-/freeze evaporator 3980 m3/h, air throw 15m, fin space 7mm. Mentioned cooling capacity of 6.78kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 3.43kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 1.68kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Goedhart |
|
FC38DI 61354-230-4P dual discharge cooling evaporator, type of refrigerant: R404A/All Freon |
|
6.8 kW |
|
New, still in the original package: Goedhart type FC38DI 61354-230-4P dual discharge cooling evaporator is equipped with 1 piece Ziehl-Abegg ventilator motor 50Hz/150W/1500RPM/Ø500, air flow of 1644m3/h, fin space 4mm, noise emission 57dB(A) at 3m. Mentioned cooling capacity of 6.8kW is with refrigerant R404a at an evaporating temperature 0°C and an air inlet temperature of +10°C. Cooling capacity at evaporating temperature -8°C and an air inlet temperature of 0°C is 4.6kW.
|
|
Nieuw |
|
More information |
| Küba / Kelvion |
|
DFA 072D V7.45 SONDER cool evaporator, type of refrigerant: R404A/CO2/All Freon |
|
7.4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator for CO2/Freon DX model (max. operating pressure 45 bar) is equipped with 2 pieces ventilator motors each 50Hz/75W/1350RPM, total air flow of 2070m3/h, air throw 13m, fin space 4,5mm. Mentioned cooling capacity of 7,4kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -8°C is 4,7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGA 45-F41 HOCHLEISTUNGS cool evaporator, type of refrigerant: R404A/All Freon |
|
8.5 kW |
|
New: still in the original package: Küba/GEA one-sided blowing (air out from the ventilator side) cool evaporator (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz/275W/1360RPM, total air flow of 4570m3/h, air throw 38m, fin space 4.5mm. Mentioned cooling capacity of 8.5kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 5.7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGAE 45-F41 cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
8.5 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 1 piece ventilator motor 50Hz/275W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3.5kW, total air flow of 4570m3/h, air throw 38m, fin space 4.5mm. Mentioned cooling capacity of 8.5kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 5.7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| GEA/Küba |
|
SGBE 56-F61 used cool-/freeze evaporator, type of refrigerant: R507/All Freon/CO2 |
|
9 kW |
|
Used: Cool-/Freeze Evaporator, brand of GEA/Küba, type SGBE 56-F61. This in very good condition cool/freeze evaporator is equipped with electrical defrost of max. 11.6 kW, liquid valve for the expansion valve, fin space of 7mm, 1 piece ventilator motor, air throw 25 m, diameter of ventilator motor 560 mm, air flow of 5900 m3/h. Mentioned cooling capacity is at an evaporating temperature -30°C with refrigerant R507, at evaporating temperature -8°C approx.11 kW.
|
|
2004 |
|
More information |
| Siarco |
|
UPSL82SR used water/glycol cooler, type of refrigerant: Water/Glycol |
|
9 kW |
|
Used double-sided water/glycol cooler, brand Siarco type UPSL82SR. This used water/glycol cooler is equipped with:
• 2 pieces Ebm ventilators (each 90W/1350RPM/50Hz)
• Fin space 4mm
Mentioned cooling capacity of 9kW is at a water/glycol range of -2°C/+3°C.
|
|
2006 |
|
More information |
| Küba / GEA |
|
DFAE 063D cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
9.11 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool-/freeze evaporator for Freon DX model is equipped with 3 pieces 50Hz 1Ph ventilator motor each 75W / 1350RPM, electrical defrost in evaporator block with a total absorbed power of 3kW, total air flow of this cool-/freeze evaporator 3300m3/h, air throw 15m, fin space 4.5mm. Mentioned cooling capacity of 9.11kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C approx. 5.72kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
DFB 063D cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
9.4 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing cool evaporator (max. operating pressure 32 bar) is equipped with 3 pieces ventilator motors 50Hz/75W/1350RPM, total air flow of 3300m3/h, air throw 15m, fin space 4,5mm. Mentioned cooling capacity of 9,4kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity is with refrigerant R404a at evaporating temperature -8°C approx.5,9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 072D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
10 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motor each 212W/ 1382RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 3.6W, total air flow of this cool-/freeze evaporator 6420m3/h, air throw 21m, fin space 7mm. Mentioned cooling capacity of 9.9kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 6kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 2.4kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Helpman |
|
LDX 24-7-N51500 used air cooler, type of refrigerant: Freon |
|
10 kW |
|
Used and in very good condition Helpman LDX 24-7 double-sided air cooler, equipped with two ventilators, DX version. Cooling capacity at +0°C evaporating temp. is 9,5 kW.
|
|
2006 |
|
More information |
| Küba / Kelvion |
|
SGA 35-F42 HOCHLEISTUNGS cool evaporator, type of refrigerant: R404A/All Freon |
|
10.6 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator (max. operating pressure 32 bar) is equipped with 2 pieces ventilator motors each 50Hz/15W/1430RPM, total air flow of 5400m3/h, air throw 33m, fin space 4,5mm. Mentioned cooling capacity of 10,6kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 7,2kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 82 V1.07 V3.09 V3.10 RH V3.12 cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
10.6 kW |
|
New: still in the original package: Küba/GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for Freon DX application (max. operating pressure 32 bar) is equipped with stainless steel casing, 2 pieces ventilator motors each 50Hz/205W/1362RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 4.55kW, total air flow of 5540m3/h, air throw 28m, fin space 7mm, noise emission 78dB(A). Mentioned cooling capacity of 10.6kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -18°C is 8.5kW.
|
|
2003 - Nieuw / New / Neu |
|
More information |
| GEA/Küba |
|
SGBE 082C used cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
10.6 kW |
|
Used one-sided blowing (air out from the ventilator side) cooling-/freezing evaporator, brand GEA/Küba type SGBE 082C. This in very good condition cooling-/freezing evaporator is equipped with:
• 2 pieces SÜD ventilators (each Ø400, 1360RPM, 230V, 210W, 50Hz) with electric ring heater
• Air flow 5.540m3/h
• Fin space 7mm
• Air throw 28m
• Electric defrost in drip tray and coil block, total absorbed power 4,55kW
Mentioned cooling capacity of 10,6kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 8,5kW.
|
|
2010 |
|
More information |
| Küba / Kelvion |
|
SGAE 30-F34 cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
11 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool-/freeze evaporator (max. operating pressure 32 bar) is equipped with 4 pieces ventilator motors each 50Hz/65W/1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 5.9kW, total air flow of 5720m3/h, air throw 27m, fin space 4.5mm. Mentioned cooling capacity of 11kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 7.1kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.v
|
|
Nieuw / New / Neu |
|
More information |
| Küba / Kelvion |
|
SGBE 50-F42A Hochlesitungsluf V6.03 used cool-/freeze evaporator, type of refrigerant: All Freon/R507 |
|
11 kW |
|
Used cool-/freeze evaporator brand Küba/Kelvion type SGBE 50-F42A. This in condition as new cool-/freeze evaporator is equipped with 2 pieces ventilator motors each 50Hz/840W/1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 12,3kW, total air flow of this cool-/freeze evaporator 11,980m3/h, air throw 45 m, fin space 7mm. Mentioned cooling capacity of 11kW is at an evaporating temperature -25°C with refrigerant R507.
|
|
2016 |
|
More information |
| Goedhart |
|
FC38L-P-62407 air cooler, type of refrigerant: R134A |
|
11 kW |
|
New, still in crate: Goedhart one-sided blowing air cooler DX Freon application, equipped with 2 pieces 400V ventilators each 0.25 kW, air flow of 5855 m³/h, air throw 21 meters. Mentioned cooling capacity is with the refrigerant R134A with an air temperature in of + 13°C and an air temperature out of +10°C at an evaporating temperature of +5°C. Fin space 7 mm. Evaporator housing white, no electrical defrost. If required, we can deliver this.
|
|
2015 new |
|
More information |
| Helpman |
|
LXA 17-7 used evaporator, type of refrigerant: R507 |
|
12 kW |
|
Used, in good condition: Helpman cool/freeze evaporator equipped with 1 ventilator-motor, spider head (DX model), hot gas defrost. Mentioned cooling capacity is at an evaporating temperature of -6°C, air volume is 5800 m3/h.
|
|
1995 |
|
More information |
| Goedhart/GEA |
|
DVS 6.2.45.7 L used dual discharge cool evaporator, type of refrigerant: Water/Glycol |
|
12 kW |
|
Used and in a very good condition: Goedhart/GEA dual discharge cool evaporator type DVS 6.2.45.7 L is equipped with 2 pieces ventilators, fin space 7mm. Mentioned cooling capacity of 12kW is at a water/glycol inlet temperature of 0°C and an outlet temperature of +4°C at an air inlet temperature of +8°C.
|
|
2003 |
|
More information |
| Searle/GEA |
|
DSR100-4L used cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
12 kW |
|
Used dual-discharge blowing cooling-/freezing evaporator, brand Searle/GEA type DSR100-4L. This in very good condition cooling-/freezing evaporator is equipped with:
• 4 pieces ventilators, each 1350RPM/150W
• Air flow 1,7 m3/s
• Air throw 11mm
• Fin spacing 4mm
• Electric defrost in the coil 7,67kW
Mentioned cooling capacity of 12kW is with refrigerant R404a at a evaporating temp. of -8°C with ΔT8K
|
|
2011 |
|
More information |
| Küba / GEA |
|
DFA 064D cool-/freeze evaporator, type of refrigerant: R744/All Freon |
|
12.2 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool-/freeze evaporator for Freon DX model is equipped with 4 pieces 50Hz 1Ph ventilator motor each 75W / 1350RPM, total air flow of this cool-/freeze evaporator 4400m3/h, air throw 18m, fin space 4.5mm. Mentioned cooling capacity of 12.2kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C approx. 7.7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGLE 50-F42 V1.07 V3.09 V3.10 L V3.12 cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
12.4 kW |
|
New: still in the original package: Küba/GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for Freon DX application (max. operating pressure 32 bar) is equipped with stainless steel casing, 2 pieces ventilator motors each 50Hz/657W/1390RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 12.35kW, total air flow of 13400m3/h, air throw 37/24m, fin space 12mm, noise emission 81 dB(A). Mentioned cooling capacity of 12.4kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -18°C is 9.9kW.
|
|
2003 - Nieuw / New / Neu |
|
More information |
| Goedhart |
|
DVS 42507L used water/glycol cooler, type of refrigerant: Water/Glycol |
|
12.5 kW |
|
Used dual-discharge blowing water/glycol cooler, brand Goedhart type DVS 42507L. This in very good condition dual-discharge blowing water/glycol cooler is equipped with:
• 2 pieces WOODS ventilators each Ø500 / 1350RPM / 0,74kW
• Air flow 15.350 m3/h
• Fin space 7 mm
• Block volume 26 dm3
• Surface 89 m2
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -3°C / -0,5°C, volume flow 5m3/h.
|
|
2005 |
|
More information |
| Eco |
|
CTE 192-8ED used freezing evaporator, type of refrigerant: R404A/All Freon |
|
12.5 kW |
|
Used draw through freezing evaporator, brand Eco type CTE 192-8ED. This in very good condition draw through freezing evaporator is equipped with:
• 6 pieces Ebm ventilators (each Ø315, 1360RPM, 105W, 230V)
• Air flow 9.810 m3/h
• Fin space 8,5 mm
• Air throw 24 m
• Electric defrost in drip tray and coil block, total absorbed power 7,2kW
Mentioned cooling capacity is with refrigerant R404a at an evaporating temperature -25°C with ΔT8K.
|
|
1997 |
|
More information |
| Goedhart/Kelvion |
|
L.L.K. one sided blowing evaporator, type of refrigerant: CO²/R744 |
|
13 kW |
|
New, still in the original package: Goedhart/Kelvion type L.L.K. one sided blowing-evaporator (air out from the ventilator side). Freeze evaporator for CO² pump circulation, specification as follows:
• Fin spacing 15mm.
• Surface 39m².
• Duty 13 kW by -45 °C evaporating temperature.
• Tube volume 25 dm³.
• Air Flow 5487 m³/h.
• Air temperature in/out -28°C / -33°C.
• Ventilator Ziehl Abegg -AC -450, 1560 RPM voltage 3x690 on 60 Hz, 0,9 kW.
• Fan tube heating 0,40kW 230V.
• Defrosting hot gas in coil and drip tray.
• Mass empty 270kg.
• All necessaries pressures certificates.
Mentioned cooling capacity of 13kW is with refrigerant CO²/R744 at an evaporating temperature of -45 °C.
|
|
Nieuw / New / Neu |
|
More information |
| Küba/GEA |
|
SGLE 092C new freeze evaporator, type of refrigerant: R404A/All Freon |
|
13 kW |
|
New ( still in crate) one-sided blowing (air out from the ventilator side) freezing evaporator brand Küba/GEA type SGLE 092C. This new one-sided blowing freezing evaporator is equipped with:
• 2 pieces Süd-Electric ventilators, each 1400RPM/450W
• Air flow 9.780 m3/h
• Fin space 12 mm
• Air throw 40 m
• Block volume 19,9 dm3
• Surface 50 m2
• Electric defrost in coil (6,5kW) and drip tray (0,65kW)
Mentioned cooling capacity is with refrigerant R404a at a evaporating temp. of -8°C with ΔT8K. Cooling capacity at evaporating temp. of -25°C with ΔT7K is 10kW.
|
|
Nieuw / New / Neu |
|
More information |
| Siarco |
|
UPS64SP-E used water/glycol cooler, type of refrigerant: Water/Glycol |
|
13 kW |
|
Used one-sided blowing water/glycol cooler, brand Siarco type UPS64SP-E. This in good condition used water/glycol cooler is equipped with:
• 4 pieces Ebm ventilators (each 90W/1350RPM/50Hz)
• Fin space 7 mm
• Electric defrost in block
Mentioned cooling capacity of 13kW is at a water/glycol range of -2°C/+3°C.
|
|
2006 |
|
More information |
| Goedhart |
|
VNS 64357 used water/gycol cooler, type of refrigerant: Water/Glycol |
|
13 kW |
|
Used one-sided blowing water/glycol cooler, brand Goedhart type VNS 64357. This in very good condition one-sided blowing water/glycol cooler is equipped with:
• 4 pieces Ziehl-Abegg ventilators each 1690RPM, 0,14kW
• Air flow 10.360m3/h
• Fin space 7 mm
• Block volume 26 dm3
• Surface 98 m2
• Electric defrost in block and drip tray
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of-3°C / +3°C and an air inlet temp. of +6°C.
|
|
2013 |
|
More information |
| Küba / GEA |
|
SGBE 082D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
13 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motor each 212W/1382RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 4.5kW, total air flow of this cool-/freeze evaporator 6680m3/h, air throw 22m, fin space 7mm. Mentioned cooling capacity of 13.3kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 8.6kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 5.82kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Helpman Thor |
|
418-8-KZH/4/6 used evaporator, type of refrigerant: R507 |
|
13 kW |
|
Used, as new: Helpman cool/freeze evaporator equipped with 1 ventilator- motor, spider head (DX model), hot gas defrost. Mentioned cooling capacity is at an evaporating temperature of -4°C, air volume is 8580 m3/h, ventilator 1500 RPM.
|
|
2005 |
|
More information |
| GEA/Goedhart |
|
DU.P/ DVS62457 used air cooler, type of refrigerant: All Freon |
|
14 kW |
|
Used and in very good condition: GEA/Goedhart double sided blowing air cooler type DU.P / DVS62457, product nr. VK0601155, equipped with electrical defrost 6,7kW, 2 ventilators each 0,4kW, 1350RPM, air volume is 10.390 m3/h, fin space 7mm. This cooler is very suitable for freeze-storage application. Mentioned cooling capacity is with refrigerant R507 at -10°C evaporating temperature.
|
|
2006 |
|
More information |
| Siarco |
|
UPS63SP used water/glycol cooler, type of refrigerant: Water/Glycol |
|
14 kW |
|
Used one-sided blowing water/glycol cooler, brand Siarco type UPS63SP. This in good condition used water/glycol cooler is equipped with:
• 3 pieces Ebm ventilators (each 90W/1350RPM/50Hz)
• Fin space 4mm
Mentioned cooling capacity of 14kW is at a water/glycol range of -2°C/+3°C.
|
|
2006 |
|
More information |
| Alfa-Laval |
|
INR W 502 Y60 A (A) used water/glycol cooler, type of refrigerant: Water/Glycol |
|
15 kW |
|
Used, draw through water/glycol cooler, brand Alfa-Laval type INR W 502 Y60 A (A). This, in very good condition draw through water/glycol cooler is equipped with:
• 2 pieces Ziehl Abegg ventilators, each Ø500, 0,78/055kW, 1340/1000RPM
• Air flow 15.641 m3/h
• Fin spacing 6mm
• Air throw 38 m
• Block volume 20 dm3
• Surface 73 m2
• Aluminum casing/aluminum fins
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -8°C / +4°C and an air inlet temp. of +2°C.
Cooling capacity at an air inlet temp. of +10°C is approx. 25 kW.
|
|
2004 |
|
More information |
| Helpman/Alfa Laval |
|
THOR–D-224-4L-H3 used air-cooler, type of refrigerant: All/R507 |
|
15 kW |
|
Used, in very good condition: Helpman THOR-D-224 double-sided air-cooler equipped with 2 ventilators, 0,25kW each, 6100 m3/h, electrical defrost. Mentioned cooling capacity is at an evaporating temperature of -8°C.
|
|
2004 |
|
More information |
| Goedhart / GEA |
|
used evaporator, type of refrigerant: R22 |
|
15 kW |
|
In very good condition: R22/glycol evaporator with E-defrost and Woods fan of 450 Watt 1230 RPM.
|
|
1998 |
|
More information |
| Küba / GEA |
|
SGBE 073D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
15 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 3 pieces ventilator motor each 212W / 1382RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 5.2kW, total air flow of this cool-/freeze evaporator 9630m3/h, air throw 24m, fin space 7mm. Mentioned cooling capacity of 15.14kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 10kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 8kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SPBE 45-F42 V7.45 cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
15 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model is equipped with 2 pieces 50Hz 1Ph ventilator motor each 270W / 1360RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 6.1kW, total air flow of this cool-/freeze evaporator 9740m3/h, air throw 31m, fin space 7mm. Mentioned cooling capacity of 15 kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 13.2kW. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 10kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
DPB 043 cooling evaporator, type of refrigerant: CO2/R507/All Freon |
|
15.73 kW |
|
New: still in the original package: Küba / GEA double-sided blowing cooling evaporator for CO2/Freon DX model is equipped with 3 pieces 50Hz 1Ph ventilator motor each 185W / 1320RPM, total air flow of this cooling evaporator 5310m3/h, air throw 2x11m, fin space 7mm. Mentioned cooling capacity of 15.73kW is with refrigerant R744 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R744 at evaporating temperature -8°C approx. 11.45kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGB 083C cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
16.1 kW |
|
New: still in the original package: Küba / GEA one-sided blowing cool evaporator for Freon DX model is equipped with 3 pieces 50Hz 1Ph ventilator motor each 205W / 1362RPM, total air flow of this cool evaporator 8700m3/h, air throw 34m, fin space 7mm. Mentioned cooling capacity of 16,1kW is with refrigerant R404a at an evaporating temperature -8°C. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 35-F44 cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
16.4 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for Freon DX model is equipped with 4 pieces 50Hz 1Ph ventilator motor each 150W / 1430RPM electrical defrost in evaporator block and drip tray with a total absorbed power of 8.8kW, total air flow of this cool-/freeze evaporator 11520m3/h, air throw 41m, fin space 7mm. Mentioned cooling capacity of 16.4kW is with refrigerant R507 at an evaporating temperature -8°C. Cooling capacity is with refrigerant R507 at evaporating temperature -25°C approx. 11kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba/GEA |
|
SGBE 092C HOCHLEISTUNGS-LUFTK used cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
16,9 kW |
|
Used single-sided suction cooling/freezing evaporator, brand GEA/Küba type SGBE 092 C HOCHLEISTUNGS-LUFTK. This refrigerator/freezer evaporator in very good condition is equipped with:
• 2 pcs SÜD fans (each Ø500, 1400RPM, 230V, 360W, 50/60Hz) with electric ring heater.
• Airflow 9.060m3/h
• Blade spacing 7mm
• Air throw 37m
• Electric defrost in drip tray and block, total power consumption 4.55kW
Mentioned cooling capacity of 8kW is with refrigerant R404a at evaporating temperature of 0°C. Cooling capacity at evaporating temperature of -18°C is 7kW.
|
|
2007 |
|
More information |
| Güntner |
|
GADC RX 035.1/4-40.A-4478629 new air-cooler, type of refrigerant: R513A/All Freon |
|
17 kW |
|
New dual-discharge blowing air cooler, brand Güntner type GADC RX 035.1/4-40.A-4478629. This new dual-discharge blowing air cooler is equipped with:
• 4 pieces ventilators each 1380RPM, 0,16kW
• Air flow 8.686 m3/h
• Fin space 4 mm
• Air throw 2 x 16 m
• Block volume 12,6 dm3
• Surface 107 m2
Mentioned cooling capacity of 17kW is with refrigerant R513A at a evaporating temp. of -2°C with an air inlet temp. of +6°C.
|
|
Nieuw/New/Neu |
|
More information |
| Küba / GEA |
|
SGBE 092D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
17 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motor each 236W / 921RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 7.7kW, total air flow of this cool-/freeze evaporator 8700m3/h, air throw 20m, fin space 7mm. Mentioned cooling capacity of 16.85kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 11.38kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 8.6kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw /New/Neu |
|
More information |
| Güntner |
|
DHN 066C/14 used air-cooler, type of refrigerant: R134A |
|
17 kW |
|
Used and in very good condition: Güntner double-sided blowing air-cooler type DHN 066C/14, equipped 1 ventilator, DX model. Mentioned cooling capacity is assessed at -3°C evaporating temperature.
|
|
2009 |
|
More information |
| GEA/Küba |
|
SPBE 063D used cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
17.8 kW |
|
Used one-sided blowing (air out from the ventilator side) cooling-/freezing evaporator, brand GEA/Küba type SPBE 063D. This in very good condition cooling-/freezing evaporator is equipped with:
• 3 pieces Ebm ventilators (each Ø400, 1420RPM, 220V, 270W, 50 Hz)
• Air flow 9.240m3/h
• Fin space 7mm
• Air throw 14m
• Surface 61.1m2
• Electric defrost in drip tray and coil block, total absorbed power 9,45kW
Mentioned cooling capacity of 17,8kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 14,1kW.
|
|
2007 |
|
More information |
| Siarco |
|
UPS64 used water/glycol cooler, type of refrigerant: Water/Glycol |
|
18 kW |
|
Used double-sided water/glycol cooler, brand Siarco type UPS64. This in good condition water/glycol cooler is equipped with:
• 4 pieces Ebm ventilators (each 90W/1350RPM/50Hz)
• Fin space 4mm
Mentioned cooling capacity of 18kW is at a water/glycol range of -2°C/+3°C.
|
|
2006 |
|
More information |
| Helpman/Alfa Laval |
|
THORD-228-7-HNC6/400 used water/glycol cooler, type of refrigerant: Water/Glycol |
|
18 kW |
|
Used dual-discharge blowing water/glycol cooler, brand Helpman/Alfal Laval type THORD-228-7-HNC6/400. This in very good condition dual-discharge blowing water/glycol cooler is equipped with:
• 2 pieces ventilators, each Ø457, 0,25kW, 1440/710 RPM
• Air flow 9.800 m3/h
• Fin space 7 mm
• Air throw 2 x 14 m
• Block volume 36 dm3
• Surface 108 m2
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -3°C / +3°C and an air inlet temp. of +6°C on 1440RPM.
|
|
2004 |
|
More information |
| Goedhart/Kelvion |
|
VRZ-824510 (LLK.p) used freezing evaporator, type of refrigerant: R744/CO2 |
|
18 kW |
|
Used draw through freezing evaporator, brand Goedhart/Kelvion type VRZ-824510 (LLK.p). This, in condition as new condition draw through freezing evaporator is equipped with:
• 2 pieces Ziehl-Abegg ventilators (elk Ø450, 1350RPM, 0,54kW) with electric ring heater
• Air flow 10.365 m3/h
• Fin spacing 10 mm
• Surface 87 m2
• Volume 28 m3
• Hot gas defrost in drip tray and coil block
• Stainless steel coil, aluminum fins and end plates
Mentioned cooling capacity is with refrigerant R744/CO2 at an evaporating temperature -28°C.
|
|
2017 |
|
More information |
| GEA/Goedhart |
|
FC 38SZP 62507-400-G used evaporator, type of refrigerant: All/Freon |
|
18 kW |
|
Used Goedhart cool/freeze evaporator model FC 38SZP 62507-400-G, order nr. Goedhart PJV081102-VK0800841. This cool/freeze evaporator is in very good condition and equipped with 2 ventilators (0,82kW each), fin space 7mm, hot gas defrost in the drip tray. Watch out: this cool/freeze evaporator is delivered without electrical defrost; if required, this can be supplied. Mentioned cooling capacity is at -30°C evaporating temperature with refrigerant R507. It is a suction cooler
|
|
2008 |
|
More information |
| Helpman/Alfa Laval |
|
LDX-26-7 used cooling evaporator, type of refrigerant: All Freon |
|
18 kW |
|
Used cooling evaporator brand Helpman/Alfa Laval type LDX-26-7.This in very good condition double blowing cooler is equipped with 3 pieces 220 V ventilators, expansion valve + liquid valve. Mentioned cooling capacity is at an evaporating temperature of +0°C.
|
|
2004 |
|
More information |
| Helpman |
|
LEX-24-E used cool-/freeze evaporator, type of refrigerant: All Freon |
|
18 kW |
|
Used and in very good condition: used cool-/freeze evaporator type LEX-24-E (DX version). This cool-/freeze evaporator is equipped with 2 pieces ventilators 220V 1 phase. Electrical defrost in block and drip tray max. 13.2 kW, fin space 7 mm. Mentioned nominal cooling capacity is at an evaporating temperature of -5°C/8 K with the refrigerant R507.
|
|
2002 |
|
More information |
| Goedhart |
|
FC38Dp 62407-400L used water/glycol cooler, type of refrigerant: Water/Glycol |
|
18 kW |
|
Used water/glycol cooler, brand Goedhart type FC38Dp 62407-400L. This is in condition as new dual discharge water/glycol cooler equipped with 2 pieces 220V ventilators with a total airflow of 5625m3/h, fin space 7mm. Mentioned cooling capacity is with a water/glycol inlet temperature of -2°C and a water/glycol outlet temperature of +3°C at a water/glycol circulation of 3.29m2/h, pressure drop 70,4kPa.
|
|
2015 |
|
More information |
| Goedhart / Kelvion |
|
CCD 42404 cool evaporator, type of refrigerant: R404A/All Freon |
|
18.8 kW |
|
New: still in the original package: Goedhart / Kelvion one sided suction cool evaporator is equipped with 2 pieces ventilator motors each 230W/50Hz/1360RPM, total air flow 5832m3/h, air throw 21m, fin space 4mm, noise emission 56,2dB(A) at 3m. Mentioned cooling capacity of 18,8kW is with refrigerant R404A at an evaporating temperature 0°C. Cooling capacity at an evaporating temperature -8°C is 12.7kW.
|
|
Nieuw/New/Neu |
|
More information |
| Helpman/Alfa Laval |
|
THOR-334-6-B-NCB/230 used water/glycol cooler, type of refrigerant: water/glycol |
|
19 kW |
|
Used one-sided blowing water/glycol cooler, brand Helpman/Alfal Laval type THOR-334-6-B-NCB/230. This in very good condition one-sided blowing water/glycol cooler is equipped with:
• 3 pieces ATB ventilators each Ø508, 1350RPM, 0,37kW
• Air flow 20.500 m3/h
• Fin space 6 mm
• Air throw 26 m
• Block volume 37 dm3
• Surface 125 m2
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -3°C / +3°C and an air inlet temp. of +6°C.
|
|
2004 |
|
More information |
| Güntner |
|
S-CXGHN 045.2F/312-ENW.E used cooling-/freezing evaporator, type of refrigerant: CO2/R744/All Freon |
|
20 kW |
|
Used one-sided blowing cooling-/freezing evaporator brand Güntner type S-CXGHN 045.2F/312-ENW.E. This in condition as new cooling-/freezing evaporator is equipped with:
• 3 pieces Ebm ventilators each Ø450/1360RPM/0,47kW
• Airflow 9.900m3/h
• Fin space 12mm
• Electric defrost in drip tray with a total absorbed power of 4,5kW and separate defrost circuit in the evaporator block by glycol
Mentioned cooling capacity of 20kW is with refrigerant CO2/R744 at an evaporating temperature of -33°C at an air inlet/outlet temperature of-24°C/-28,7°C.
Cooling capacity with refrigerant CO2/R744 at an evaporating temperature of -45°C and ΔT10K is 25kW. Note: Evaporator will be supplied with pressure certificate.
|
|
2011 |
|
More information |
| Siarco |
|
UPS63SP-E used water/glycol cooler, type of refrigerant: Water/Glycol |
|
20 kW |
|
Used one-sided blowing water/glycol cooler, brand Siarco type UPS63SP-E. This in good condition used water/glycol cooler is equipped with:
3 pieces Ziehl Abegg ventilators (each 0,8kW/1350RPM).
Fin space 6 mm.
Electric defrost in block.
Mentioned cooling capacity of 20kW is at a water/glycol range of -2°C/+3°C.
|
|
2006 |
|
More information |
| Siarco/Zanotti |
|
TUPM 838 EGL used dual discharge air cooler,type of refrigerant: Water/Glycol |
|
20 kW |
|
Used water/glycol cooler, brand Siarco/Zanotti, type TUPM 838 EGL.This in good condition dual discharge water/glycol cooler is equipped with 3 pieces EbM-papst ventilators 400V / 50/60Hz / 1370/1490RPM, electrical defrosting in drip tray, fin space 7mm. Mentioned cooling capacity is approx. 20kW at an water/glycol inlet temperature of -2°C.
|
|
2011 |
|
More information |
| Küba / GEA |
|
SGBE 083D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
20 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 3 pieces ventilator motor 212W / 1382RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 6.57kW, total air flow of this cool-/freeze evaporator 10000m3/h, air throw 25m, fin space 7mm. Mentioned cooling capacity of 20kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 13kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 9kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Küba / GEA |
|
SGBE 102D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
20 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motor each 236W / 921RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 9.2kW, total air flow of this cool-/freeze evaporator 9660m3/h, air throw 22m, fin space 7mm. Mentioned cooling capacity of 20kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 15.2kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 13.7kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Raffel |
|
used storage evaporator, type of refrigerant: R717/NH3 Ammonia |
|
20 kW |
|
Used and in very good condition: complete Raffel NH3 ammonia storage freeze evaporator for pump application, equipped with hot gas defrost (hot gas pipe in insulated drip tray), equipped with 4 ventilators each 0,5 kW high revs and 0,15 kW low revs, 1400/900 RPM., 20400 m³/h., evaporator block 10mm fin space. Mentioned cooling capacity is at -30°C evaporating temperature.
|
|
1997 |
|
More information |
| Goedhart |
|
VCI-C 82566 used cool/freeze evaporator, type of refrigerant: R404A/R507 |
|
21 kW |
|
Used: Goedhart one-sided blowing DX cool/freeze evaporator equipped with 2 pieces Woods ventilators each 0,83 kW, fin space 10 mm, 20660 m3/h air volume. 100 pa delivery head, hot gas defrost. Mentioned cooling capacity is at an evaporating temperature of-10°C, AT 8°C with refrigerant R404a.
|
|
2004 |
|
More information |
| Helpman/Alfa Laval |
|
THORD-436-7-H-NC16/400 used water/glycol cooler, type of refrigerant: Water/Glycol |
|
21 kW |
|
Used dual-discharge blowing water/glycol cooler, brand Helpman/Alfal Laval type THORD-436-7-H-NC16/400. This in very good condition dual-discharge blowing water/glycol cooler is equipped with:
• 3 pieces ventilators each Ø508, 0,55kW, 1440RPM
• Air flow 25.200 m3/h
• Fin space 7 mm
• Air throw 2 x 18 m
• Block volume 65 dm3
• Surface 202 m2
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -3°C / +3°C and an air inlet temp. of +6°C.
|
|
2004 |
|
More information |
| Küba / GEA |
|
DPB 044 C cooling evaporator, type of refrigerant: R507/All Freon |
|
21.55 kW |
|
New: still in the original package: Küba / GEA double-sided blowing cooling evaporator for Freon DX model is equipped with 4 pieces 50Hz 1Ph ventilator motor each 185W / 1320RPM, total air flow of this cooling evaporator 7080m3/h, air throw 2x12m, fin space 7mm. Mentioned cooling capacity of 21.55kW is with refrigerant R507 at an evaporating temperature 0°C. Cooling capacity is with refrigerant R507 at evaporating temperature -8°C 14.63kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Eco |
|
used cool/freeze evaporator, type of refrigerant: R507A/All Freon |
|
23 kW |
|
Used: Cool/freeze evaporator brand ECO type CTE 355A8ED, this very well maintained used cool/freeze evaporator is equipped with 5 pieces ventilators each 925 watts, air throw 23 meters, 220V, 8 mm fin spacing, electrical defrost. Mentioned cooling capacity of 23 kW is at an evaporating temperature of -30°C with the refrigerant R507A.
|
|
2008 |
|
More information |
| Güntner |
|
S-GHT 080F/110 used evaporator, type of refrigerant: NH3 Ammonia |
|
23 kW |
|
In good condition: Güntner evaporator, capacity of 23kW is at evaporating temperature -20,4°C inlet and -23,6°C outlet.
|
|
1994 |
|
More information |
| Küba / GEA |
|
SGBE 093D cool-/freeze evaporator, type of refrigerant: CO2/R507/All Freon |
|
23 kW |
|
New: still in the original package: Küba / GEA one-sided blowing (air out from the ventilator side) cool-/freeze evaporator for CO2/Freon DX model (max. operating pressure 60 bar) is equipped with 2 pieces ventilator motor each 236W/ 921RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 10.32kW, total air flow of this cool-/freeze evaporator 13050m3/h, air throw 24m, fin space 7mm. Mentioned cooling capacity of 23.35kW is with refrigerant R744 at an evaporating temperature -8°C, with refrigerant R507 at the same conditions 19kW. Cooling capacity is with refrigerant R507 at evaporating temperature -30°C approx. 16.5kW. Evaporator will be delivered with PED pressure certificate and CE declaration and it meets the ErP2015 standard.
|
|
Nieuw / New / Neu |
|
More information |
| Goedhart |
|
VCI-B-82508EF used cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
23 kW |
|
Used one-sided blowing cooling-/freezing evaporator, brand Goedhart type VCI-B-82508EF. This in very good condition cooling-/freezing evaporator is equipped with:
• 2 pieces WOODS ventilators (each Ø500, 1380RPM, 880W)
• Air flow 13.960m3/h
• Fin space 8mm
• Surface 134m2
• Electric defrost in drip tray and coil block, total absorbed power 9,89kW
• Noise emission 66 dB(A) at 3m
Mentioned cooling capacity of 23kW is with refrigerant R404a at an evaporating temperature -8°C. Cooling capacity at evaporating temperature -25°C is 16,9kW.
|
|
2007 |
|
More information |
| Helpman |
|
LEX-26–H–E cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
23.4 kW |
|
Used cool-/freeze evaporator, brand Helpman, type LEX-26-H-E. This in good condition cool-/freeze evaporator (DX model) is equipped with 3 pieces ventilator motors each 0,25kW/50Hz//1410RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 19,2kW, total air flow of 14000m3/h, air throw 20m, fin space 7mm, noise emission 65dB(A). Mentioned cooling capacity of 23,4kW is with refrigerant R404a at an evaporating temperature of -8°C.
|
|
1998 |
|
More information |
| GEA / Küba |
|
DVB 152 used air-cooler, type of refrigerant: All/Freon |
|
24 kW |
|
Used and in good condition: GEA/Küba double-sided blowing air-cooler type DVB 152, equipped 2 ventilators each 180W 900 RPM. Mentioned cooling capacity is at 0°C evaporating temperature with refrigerant R507.
|
|
1990 |
|
More information |
| Goedhart/Kelvion |
|
DRS 62507 new air-cooler, type of refrigerant: R717/Ammonia |
|
24.3 kW |
|
New dual-discharge blowing air-cooler brand Goedhart/Kelvion type DRS 62507. This, new dual-discharge blowing air-cooler is equipped with:
• 2 pieces Ziehl-Abegg AC ventilators, each Ø500, 0,18kW, 740 RPM
• Air flow 7.079 m3/h
• Fin space 7 mm
• Block volume 31 dm3
• Surface 137 m2
• Stainless steel coil
Mentioned cooling capacity is with refrigerant R717/ammonia at an evaporating temperature of -6°C and air in/out temp. +4°C/-3°C.
|
|
Nieuw/New/Neu |
|
More information |
| Helpman |
|
LEX 26-7-HG/380-50-SPEC used evaporator, type of refrigerant: All Freon |
|
25 kW |
|
Used and in very good condition: used Helpman cool/freeze evaporator model LEX 26-7, serial nr. 130943/01. This cool/freeze evaporator is equipped with 3 pieces ventilators (0,25kW each). Watch out: this cool/freeze evaporator is delivered without electrical defrost; if required, this can be supplied. Mentioned cooling capacity is at -8°C evaporating temperature with refrigerant R507C.
|
|
2001 |
|
More information |
| Helpman |
|
LEX 26-7-HG/380-50-SPEC used evaporator, type of refrigerant: All Freon |
|
25 kW |
|
Used and in very good condition: used Helpman cool/freeze evaporator model LEX 26-7, serial nr. 703400. This cool/freeze evaporator is equipped with 3 pieces ventilators (0,25kW each), hot gas defrost in the drip tray. Watch out: this cool/freeze evaporator is delivered without electrical defrost; if required, this can be supplied. Mentioned cooling capacity is at -8°C evaporating temperature with refrigerant R507C.
|
|
2000 |
|
More information |
| Alfa Laval |
|
GLES 502 BS used cool/freeze evaporator, type of refrigerant: R507/All Freon |
|
25 kW |
|
Used an in very good condition: cool/freeze evaporator, DX application, with a liquid solenoid valve built before the expansion valve, 2 pieces 220V ventilators, electrical defrost, fin space 4mm, serial number evaporator: AA2251882. Mentioned cooling capacity is at an evaporating temperature of -10°C, ∆T8K, with refrigerant R507.
|
|
2009 |
|
More information |
| Helpman |
|
LEX 26-7-E cool-/freeze evaporator, type of refrigerant: All Freon |
|
25 kW |
|
Used and in good condition: cool/freeze evaporator brand Helpman type LEX 26-7-E is equipped with 3 pieces 220 V ventilators, each 0,12kW/50Hz//1350RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 19.2kW. Mentioned cooling capacity of 25kW is at an evaporating temperature of -8°C with the refrigerant R507.
|
|
1997 |
|
More information |
| Siarco/Zanotti |
|
TUPM 848 EGL used dual discharge air cooler, type of refrigerant: Water/Glycol |
|
25 kW |
|
Used water/glycol cooler, brand Siarco/Zanotti, type TUPM 848 EGL.This in good condition dual discharge water/glycol cooler is equipped with 4 pieces EbM-papst ventilators 400V / 50/60Hz / 1370/1490RPM, electrical defrosting in drip tray, fin space 7mm. Mentioned cooling capacity is approx. 25kW at an water/glycol inlet temperature of -2°C.
|
|
2011 |
|
More information |
| Goedhart |
|
LK-201m2 used freeze/-storage evaporator, type of refrigerant: R717/Ammonia |
|
25 kW |
|
Used cool/-freeze evaporator, brand Goedhart type LK-201m2. This in good condition cool/-freeze evaporator is equipped with hot gas defrosting in coil and drip tray, 2 pieces WOODS ventilator motors 940RPM each 1,4kW, ventilator ring heating, fin space 8mm, cooling surface 201m2. Evaporator block is completely galvanized. Cooling capacity is approx.. 25kW at an evaporating temperature of -30°C.
|
|
1997 |
|
More information |
| Goedhart/Kelvion |
|
DRS 81637 new air-cooler, type of refrigerant: R717/Ammonia |
|
25.5 kW |
|
New dual-discharge blowing air-cooler, brand Goedhart/Kelvion type DRS 81637. This, new dual-discharge blowing air-cooler is equipped with:
• 1 piece Ziehl-Abegg AC ventilator, Ø630, 0,62kW, 900 RPM
• Air flow 9.425 m3/h
• Fin space 7 mm
• Block volume 37 dm3
• Surface 152 m2
• Stainless steel coil
Mentioned cooling capacity is with refrigerant R717/ammonia at an evaporating temperature of -4°C and air in/out temp. +4°C/-1,7°C.
|
|
Nieuw/New/Neu |
|
More information |
| Goedhart |
|
VNS-65457 used cool-/freeze evaporator, type of refrigerant: R507/All Freon |
|
26 kW |
|
Used: Cool-/Freeze Evaporator, brand of Goedhart, type VNS-65457. This in very good condition cool/freeze evaporator is equipped with electrical defrost of 15kW in drip tray and evaporator block. 5 pieces WOODS ventilator motors, each 310 Watt 220V with an air throw of 20m, diameter of ventilator motor 450mm, air flow of 28.710 m3/h, fin space of 7mm. Mentioned cooling capacity is at an evaporating temperature -5°C with refrigerant R507 with an air outlet temperature of -0,9°C.
|
|
2004 |
|
More information |
| Helpman / Alfa-Laval |
|
LEX 28-7-E used cool-/freeze evaporator, type of refrigerant: R404/All Freon |
|
28 kW |
|
Used and in very good condition: Helpman cool-/freeze evaporator equipped with 3 pieces ATB 0,25 kW ventilators, air volume 19500 m³/h, air throw 20 meters, fin spacing evaporator block 7 mm, electrical defrost in block and drip tray. Max 19 kW. Mentioned cooling capacity is at an evaporating temperature of -30°C.
|
|
2001 |
|
More information |
| Helpman/Alfa-Laval |
|
Lex 28-7-E used cool/freeze evaporator, type of refrigerant: R507/All Freon |
|
28 kW |
|
Used and in very good condition: Helpman cool/freeze evaporator, equipped with 3 pieces ATB 0.25 kW ventilators, air flow 19500 M3/h, air throw 20 meters, fin space evaporator block 7 mm, electrical defrost in block and in drip tray, 19 kW max. Mentioned cooling capacity is at an evaporating temperature of -30°C.
|
|
2000 |
|
More information |
| Kelvion |
|
LLK.P 16x5-2206-5x50 new evaporator coil, type of refrigerant: R717/Ammonia |
|
28.4 kW |
|
New Kelvion evaporator / evaporator coil type LLK.P 16x5-2206-5x50 with specification as:
• CoilCode 16 x 4 x 2206 x 50,50 x 7,00
• Tube Pattern 155050 StSt - 0,60 mm Al
• Capcaity 28400 W
• Surface 111,8 m2
• No Of Circuits 4
• Tube volume (total) 25 dm3
• Tube inlet/outlet 1 x 21,3 x 2 mm StSt / 1 x 33,7 X 2mm StSt – Tdrill
• Air volume 12.645 m3/h
• Fin spacing 7mm
Mentioned cooling capacity of 28,4kW is with refrigerant R717/ammonia at an evaporating temp. of -5°C at an air inlet/outlet temp. of +5°C/-0,1°C.
|
|
Nieuwe/New/Neu |
|
More information |
| Goedhart / Kelvion |
|
CCD 42454 cool evaporator, type of refrigerant: R404A/All Freon |
|
29.1 kW |
|
New: still in the original package: Goedhart / Kelvion one sided suction cool evaporator is equipped with 2 pieces ventilator motors each 600W/50Hz/1390RPM, total air flow 11535m3/h, air throw 24m, fin space 4mm, noise emission 55,8dB(A) at 3m. Mentioned cooling capacity of 29,1kW is with refrigerant R404A at an evaporating temperature 0°C. Cooling capacity at an evaporating temperature -8°C is 22,1kW.
|
|
Nieuw/New/Neu |
|
More information |
| Güntner |
|
S-GHT 065E/210 freezing evaporator, type of refrigerant: R717/Ammonia |
|
30 kW |
|
Used: freezing evaporator, brand of Güntner, type S-GHT 065E/210. This freezing evaporator is in good condition and it works with the refrigerant ammonia and it is equipped with galvanised block / fins (fin space 10mm), 2 pieces Güntner ventilator motors each of 0.7kW with electric ring heater, gas defrosting in evaporator coil, electric defrosting in drip tray. Mentioned cooling capacity is with refrigerant R717/ammonia at an evaporating temperature -30°C.
3 units in stock of which 1 unit with a fin space of 12mm.
|
|
1996 |
|
More information |
| Raffel |
|
D60 82408 used storage freeze evaporator, type of refrigerant: NH3 Ammonia |
|
30 kW |
|
Used and in very good condition: complete Raffel NH3 ammonia storage freeze evaporator with hot gas defrost (hot gas pipe in insulated drip tray), equipped with 2 ventilators, motor type LS90L, 1,5kW each 14560RPM, diameter 650mm, fin space 8mm. Mentioned cooling capacity is at -35°C evaporating temperature.
|
|
2003 |
|
More information |
| Goedhart/Kelvion |
|
TN.s/AU.s/PLK. 24x7x3502x50/50x18 New evaporator coil, type of refrigerant: Water/Glycol |
|
30 kW |
|
New Goedhart/Kelvion evaporator coil for type TN.s/AU.s/PLK. 24x7x3502x50/50x18 for water/glycol application with specification as:
• CoilCode 24 X 7 X 3500 X 50,50 X 14,00
• Tube Pattern 57 - 50/50 Straight StSt/AlMg tube 15x0,60
• Aantal koelcircuits 21
• Outlet Tube 1 X 42.2 X 2mm StSt PED Category S.E.P. (DN 40 / PS 10)
• Tube diameter / pitch / material 15x0.6mm / 50x50mm / StSt304
• Fin material / thickness / distance(s) AlMg / 0.33mm / 14mm
• Veloc. (Input) 2,0 m/s
• Frost Layer 1,0 mm
• Surface 248m2
• Coolant Velocity 0,73 m/s
Mentioned cooling capacity of 30kW is with water/glycol mixture of 37% at liquid inlet/outlet temp. of -11°C/-8°C with 20.984m3/h at an air inlet/outlet temp. of -1°C/-3°C with 9,21 m3/h.
|
|
Nieuwe/New/Neu |
|
More information |
| Searle/GEA |
|
KMe140-4-3PH used cooling evaporator, type of refrigerant: R404A/All Freon |
|
30 kW |
|
Used one-sided blowing cooling evaporator(DX model), brand Searle/GEA type KMe140-4-3PH. This in very good condition cooling evaporator is equipped with:
• 3 pieces ventilators, each Ø400/1410RPM/190W
• Air flow 2,7 m3/s
• Air throw 17m
• Fin spacing 4mm
Mentioned cooling capacity of 30kW is with refrigerant R404a at a evaporating temp. of -8°C with ΔT10K.
|
|
2011 |
|
More information |
| Helpman/Alfa Laval |
|
TX 26-8-7-200/NC26-E4-R used cooler, type of refrigerant: Water/Glycol |
|
30 kW |
|
Used single-sided suction water/glycol cooler, brand Helpman/Alfa Laval type TX-26-8-7-200/NC26-E4-R. This very good condition single suction water/glycol cooler is equipped with:
2 pcs rotor 1.25 kW fans 1382 RPM
Electric defrost elements in the block / drip tray
Fin spacing 7mm
Coil volume 55 dm³
Cooling capacity stated is with a water/glycol mixture of 30% at a water/glycol range of -3° / +3°C and an air entry temp. Of +6°C.
|
|
2002 |
|
More information |
| Cabero |
|
CHSS8G2/50.2D (ZA) -E-R-I-X used cool evaporator, type of refrigerant: R744/CO2 |
|
30.7 kW |
|
Used cool evaporator: brand Cabero, type CHSS8G2/50.2D (ZA) -E-R-I-X. This in very good condition cool evaporator is equipped with 2 pieces ventilators each 50Hz/0,84kW/1340RPM, max. operating pressure 45 bar, air flow 15220m3/h, air throw 23m, fin space 7mm, noise emission 60dB(A) at 3m. Mentioned cooling capacity of 30,7kW is with refrigerant R744 at an evaporating temperature of -4°C.
|
|
2015 |
|
More information |
| Alfa Laval |
|
BFGE-405-C40 SA used air-cooler, type of refrigerant: R507/All Freon |
|
32 kW |
|
Used and in good condition: Alfa Laval double-sided air-cooler (very suitable for production rooms) equipped with 5 pieces ventilators, with a total air flow of 17760m³/h, sound production is at 5 m distance 65 dB(A). Mentioned capacity of 32kW is at an evaporating temperature of -8°C with refrigerant R507.
|
|
2003 |
|
More information |
| GEA / Küba |
|
SGA 56-F-62 used cool/evaporator, type of refrigerant: R507C |
|
32 kW |
|
Used and in very good condition: used GEA/Küba cool/evaporator type SGA 56-F-62 serial number 580090/01002005/11295247 LZ. This cooling evaporator is equipped with two ventilators, each 813 watts and 13.500 m3/h air volume with an air throw of 35/25 mtr., liquid valve for the expansion valve and 4.5 mm fin space. Mentioned cooling capacity of 32 kW is at an evaporating temperature of 0°C. Cooling capacity at an evaporating temperature of -30 is approx. 25 kW.
|
|
2005 |
|
More information |
| Frigers |
|
DPie 4030 used evaporator, type of refrigerant: R507 |
|
35 kW |
|
Used: cool/freeze evaporator type DPie 4030, equipped with electrical defrost, 3x 750Watt ventilators, 7mm fin space. Mentioned cooling capacity is estimated at -30°C evaporating temperature.
|
|
2001 |
|
More information |
| Güntner |
|
S-GGF-050E/37 used water/glycol cooler, type of refrigerant: Water/Glycol |
|
35 kW |
|
Used, draw through water/glycol cooler, brand Güntner type S-GGF-050E/37. This, in good condition draw through water/glycol cooler is equipped with:
• 3 pieces Süd-Electric ventilators, each Ø500, 0,6kW, 1330RPM
• Air flow 17.250 m3/h
• Fin spacing 7 mm
• Air throw 27 m
• Block volume 56,4 dm3
• Surface 97 m2
Mentioned cooling capacity is with a water/glycol mixture of 25% at a water/glycol range of -3°C / +2°C and an air inlet temp. of +10°C.
|
|
1997 |
|
More information |
| Helpman/Alfa-Laval |
|
Lex 30-7-E cool/freeze evaporator, type of refrigerant: R507/All Freon |
|
36 kW |
|
Used and in very good condition: Helpman cool/freeze evaporator, equipped with 4 pieces ATB 0.25 kW ventilators, air flow 23400 M3/h, air throw 20 meters, fin space evaporator block 7 mm. Mentioned cooling capacity is at an evaporating temperature of -8°C.
|
|
2000 |
|
More information |
| Goedhart / GEA |
|
SKU38 52634 used evaporator, type of refrigerant: All/Freon |
|
36 kW |
|
Used, in very good condition: Goedhart evaporator for air sock application, type SKU38 52634. This cooler is very suitable to cool production rooms. Cooling capacity is 36kW at 0°C and ∆T 8K.
|
|
2002 |
|
More information |
| GEA / Küba |
|
SGHN-071.2D/24-EN050E used cool/evaporator, type of refrigerant: R507C |
|
39 kW |
|
Used and in very good condition: used GEA/Küba cool/evaporator type SGHN072.2D/24-END50E. This cooling evaporator is equipped with two ventilators, each 0.68 kW and 11.700 m3/h air volume with an air throw of approx. 32 mtr., liquid valve for the expansion valve, electrical defrost. Cooler is equipped with a fin space of 4.5 mm. Mentioned cooling capacity of 39 kW is at an evaporating temperature of -8°C. Cooling capacity at an evaporating temperature of -25°C is approx. 31,6 kW.
|
|
2011 |
|
More information |
| Helpman |
|
LEX-26-7 speciaal cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
39 kW |
|
Used cool-/freeze evaporator, brand Helpman, type LEX-26-7-special. This in good condition cool-/freeze evaporator (DX model) is equipped with 5 pieces ventilator motors each 0,25kW/50Hz//1410RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 32kW, total air flow of 23333m3/h, air throw 20m, fin space 7mm. Mentioned cooling capacity of 39kW is with refrigerant R404a at an evaporating temperature of -8°C.
|
|
1998 |
|
More information |
| LU-VE |
|
GR.BATT.XNHIA912GB5PB used cool/freeze evaporator, type of refrigerant: R717/Ammonia |
|
40 kW |
|
Used cool/freeze evaporator: brand LU-VE part number 086298173. This in very good condition, one sided suction freeze evaporator is equipped with 4 pieces Ziehl-ABEGG ventilator motors, each 0.86kW 1400 RPM, stainless steel evaporator block, aluminium fins, fin space at air inlet 6mm. Mentioned cooling capacity is an estimate at evaporating temperature of 0°C.
|
|
2012 |
|
More information |
| LU-VE |
|
GR.BATT.XNHIA515G4PB used cool/freeze evaporator, type of refrigerant: R717/Ammonia |
|
40 kW |
|
Used cool/freeze evaporator: brand LU-VE part number 086298173. This in very good condition, one sided suction ammonia cool/freeze evaporator is equipped with 5 pieces Ziehl-ABEGG ventilator motors, each 0.86kW 1400 RPM, stainless steel evaporator block, aluminium fins, fin space at air inlet 8mm. Mentioned cooling capacity is an estimate at evaporating temperature of -40°C.
|
|
2012 |
|
More information |
| Searle/GEA |
|
LSR122-64-4D-EL used cooling-/freezing evaporator, type of refrigerant: R404A/All Freon |
|
40 kW |
|
Used dual-discharge blowing cooling-/freezing evaporator, brand Searle/GEA type LSR122-64-4D-EL. This in very good condition cooling-/freezing evaporator is equipped with:
• 2 pieces ventilators, each Ø500/1365RPM/650W
• Air flow 3,6 m3/s
• Air throw 10mm
• Fin spacing 4mm
• Electric defrost in the coil and drain tray 9,6kW
Mentioned cooling capacity of 40kW is with refrigerant R404a at a evaporating temp. of -8°C with ΔT10K
|
|
2011 |
|
More information |
| Helpman/Alfa Laval |
|
TX-26-8-7-300/NC26-E4 / used cooler, type of refrigerant: Water/Glycol |
|
43 kW |
|
Used single-sided suction water/glycol cooler, brand Helpman/Alfa Laval type TX-26-8-7-300/NC26-E4. This in very good condition single suction water/glycol cooler is equipped with:
3 pcs rotor 1.25 kW fans 1382 RPM
Electric defrost elements in the block / drip tray
Fin spacing 7mm
Electric defrosting in the block and drip tray with a total power consumption of 24.7kW
Coil volume 80 dm³
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -3°C / +3°C and an air entry temp. of +6°C.
|
|
2002 |
|
More information |
| Küba / Kelvion |
|
SGA 104C HOCHLEISTUNGS cool evaporator, type of refrigerant: R404A/All freon |
|
43 kW |
|
New: still in the original package: Küba/Kelvion one-sided blowing (air out from the ventilator side) cool evaporator for Freon DX application (max. operating pressure 32 bar) is equipped with 4 pieces ventilator motors each 50Hz/360W/1417RPM, total air flow of 17200m3/h, fin space 4.5mm. Mentioned cooling capacity of approx. 43kW is with refrigerant R404a at an evaporating temperature 0°C. Cooling capacity at evaporating temperature -18°C is approx.. 34kW. PAY ATTENTION, Evaporator will be delivered without ventilators.
|
|
Nieuw / New / Neu |
|
More information |
| Helpman |
|
LEX-26-6-15 cool-/freeze evaporator, type of refrigerant: R404A/All Freon |
|
46.8 kW |
|
Used cool-/freeze evaporator, brand Helpman, type LEX-26-6-15. This in good condition cool-/freeze evaporator (DX model) is equipped with 6 pieces ventilator motors each 0,25kW/50Hz//1410RPM, electrical defrost in evaporator block and drip tray with a total absorbed power of 38,4kW, total air flow of 28000m3/h, air throw 20m, fin space 7mm. Mentioned cooling capacity of 46,8kW is with refrigerant R404a at an evaporating temperature of -8°C.
|
|
1998 |
|
More information |
| Helpman |
|
THOR356-8-H1/5-G-400V cool-/freeze evaporator, type of refrigerant: R404A/R507/All Freon |
|
47.3 kW |
|
Used cool-/freeze evaporator, brand Helpman, type THOR356-8-H1/5-G-400V. This in good condition cool-/freeze evaporator (DX model) is equipped with 5 pieces ATB ventilator motors each 0,37kW/50Hz//1410RPM, hot gas defrost in drip tray, electrical defrost in evaporator block with an absorbed power of 9,8kW(if desired, we can also deliver it with electrical defrost in the drip tray), spider head, total air flow of 34700m3/h, fin space 8mm, noise emission 69dB(A). Mentioned cooling capacity of 47,3kW is with refrigerant R404a at an evaporating temperature of -8°C.
|
|
2003 |
|
More information |
| Goedhart |
|
QCC 40 E freeze evaporator, type of refrigerant: R404A/134A/R407 |
|
48 kW |
|
New, still in crate: Goedhart standing blast freeze evaporator copper/aluminium, equipped with electrical defrost, in total 12 kW E, fin spacing 7 mm. Mentioned cooling capacity is with the refrigerant R404a at an evaporating temperature of -3°C with an air volume of 38,000 m³/h. For a different evaporating temperature we can calculate the cooling capacity. Evaporator block is without ventilators, if desired we can supply two pieces high pressure ventilators Nuaire each 2.3 kW with a delivery head of 170 Pa.
|
|
2017 |
|
More information |
| Thermofin |
|
X-ton 063.T-D-4-7-E used cool/freeze cooler, type of refrigerant: Water/Glycol |
|
50 kW |
|
Used single-sided suction cool/freeze cooler, brand Thermofin type X-TON063.T-D-4-7-E for glycol use and is equipped with:
4 pieces Ebm Papst EC fans 1140 RPM 0.985 kW controlled by 0-10V.
Air flow rate 36,000 m3/h.
Fin space 7mm.
Electric defrost in block and drip tray with a total power consumption of 24.7 kW.
Stainless steel block/coil AISI304-FIN aluminum.
Coil volume 69.3L.
Mentioned cooling capacity of 50kW is with a water/glycol mixture of 30% at an water/glycol in/out temperature of -8°C/-4°C. and air temperature of 0°C.
|
|
2012 |
|
More information |
| Thermofin |
|
X-TON 063.T-D-4-7-E used freezing evaporator, type of refrigerant: R717/Ammonia |
|
50 kW |
|
Used single-sided suction cool/freeze evaporator, brand Thermofin type X-TON063.T-D-4-7-E for pump circulation and is equipped with:
• 4 pieces Ebm Papst EC fans 1140 RPM 0.985 kW controlled by 0-10V.
• Air flow rate 36,000 m3/h.
• Fin space 7mm.
• Electric defrost in block and drip tray with a total power consumption of 24.7 kW.
• For NH³ use, defrosting hot gas in coil.
• Stainless steel block/coil AISI304-FIN aluminum.
• Coil volume 69.3L.
Mentioned cooling capacity of 50kW is with the refrigerant R717/Ammonia at an evaporation temperature of -30°C at an air inlet/outlet temperature of -21.5°C/-25°C. Maximum working pressure 40 bar, test pressure 58 bar. Evaporator comes with PED printing certificate.
Note:
Evaporator for NH³ freeze storage application comes with air pockets that shut off the fans during defrost cycle.
|
|
2012 |
|
More information |
| Alfa Laval / Helpman |
|
TR 20.6-8-300 used cool/freeze evaporators, type of refrigerant: CO2 / Freon DX |
|
52 kW |
|
Used and in condition as new: cool/freeze evaporators for CO2/DX application, equipped met copper/aluminium block, two pieces EBM-EC-Hyblade ø 630 ventilators, defrost circuit in the evaporator block and drip tray by means of a glycol defrost system of Q 30kW flow 2,8m³/h, 8mm fin space, air volume ventilators 3300m³/h with delivery head of 80Pa external. This cool/freeze evaporator is as new and very suitable for storage-freeze and cold storage. Mentioned cooling capacity is with refrigerant CO2 at an evaporating temperature of -32°C and an air inlet temperature of -22°C. This cooler is also suitable for Freon DX system.
|
|
2010 |
|
More information |
| Goedhart |
|
MAC 40 N cool evaporator, type of refrigerant: R404A/134A/R407C |
|
53 kW |
|
New, still in crate: Goedhart standing blast cool evaporator copper/aluminium, fin spacing 7 mm. Mentioned cooling capacity is with the refrigerant R404a at an evaporating temperature of -5°C with an air volume of 30,000 m³/h. Evaporator block is without ventilators, if desired we can supply two pieces high pressure ventilators Nuaire each 2.3 kW with a delivery head of 170 Pa.
|
|
2017 |
|
More information |
| Goedhart / Kelvion |
|
CCD 43454 cool evaporator, type of refrigerant: R404A/All Freon |
|
54 kW |
|
New: still in the original package: Goedhart / Kelvion one sided suction cool evaporator is equipped with 3 piece ventilator motors each 600W/50Hz/1390RPM, total air flow 17299m3/h, air throw 24m, fin space 4mm, noise emission 57,2dB(A) at 3m. Mentioned cooling capacity of 54kW is with refrigerant R404A at an evaporating temperature 0°C. Cooling capacity at an evaporating temperature -8°C is 36,3kW.
|
|
Nieuw/New/Neu |
|
More information |
| Güntner |
|
DGN 066C/310-E/8P used water/glycol cooler, type koudemiddel: Water /Glycol |
|
55.5 kW |
|
Used water/glycol cooler, brand Güntner type DGN 066C/310-E/8P. This in good condition double-sided blowing water/glycol cooler is equipped with 3 pieces ventilators 760W/870RPM/Ø660mm, electrical defrost in evaporator block and drip tray with a total power consumption of 26,8kW, air volume flow 25830m3/h, air throw 2x20m, fin space 10mm. Mentioned cooling capacity is with a water/glycol mixture of 25% inlet temperature of -3°C at an air inlet temperature of +10°C at a water/glycol circulation of 9,5m3/h.
|
|
2008 |
|
More information |
| Goedhart / GEA |
|
PLK.S.304m² blast freeze/cool evaporator, type of refrigerant: NH3/Pomp |
|
60 kW |
|
Used and in very good condition: Goedhart/GEA NH3 ammonia blast freeze/cool evaporator with hot gas defrost (hot gas pipe in insulated drip tray), equipped with 3 pieces AREM high pressure ventilators, each 3kW, 60000m³/h, 3 mtr/sec, pump circulation model, fin space 11mm. Mentioned cooling capacity is at -10°C evaporating temperature. Cooling capacity at -40°C is 34kW.
|
|
1998 |
|
More information |
| Goedhart/Kelvion |
|
AU.s. used water/glycol cooler, type of refrigerant: Water/Glycol |
|
60 kW |
|
Used water/glycol cooler, brand Goedhart/Kelvion type AU.s. This in condition as new (only used 1800 hours) water/glycol cooler is designed as a down flow cooler (air vertically downwards, top-down) and is very suitable for example for cooling broilers, various carcasses in line. We can also deliver the coolers as horizontal blowing air coolers. Specification as follows:
• 5 or 6 pieces ventilators (each Ø800, 1.450RPM, 2,2kW)
• Air flow 75.000m3/h
• Fin space air in/out 10mm/7mm
• Defrost through air
• Material Cu / Al seawater resistant
• Volume 147 Ltr
Mentioned cooling capacity of 60kW is with a water/glycol mixture of 30% at a water/glycol inlet/outlet of -3°C/+2,5°C at an air inlet/outlet of +6°C/+4,5°C at a water/glycol circulation of 10m3/h with a pressure drop 1,5 bar.
42 pieces in stock of which 21 pieces with 5 fans and 21 pieces with 6 fans.
|
|
2018 |
|
More information |
| Thermofin |
|
X-TON 063.T-D-4-7-E used freezing evaporator, type of refrigerant: CO2/R744 |
|
70 kW |
|
Used single-sided suction cool/freeze evaporator, brand Thermofin type X-TON 063.-T-D-4-7-E for pump circulation and is equipped with:
• 4 pieces Ebm Papst EC fans 1140 RPM 0.985 kW controlled by 0-10V.
• Air flow rate 36,000 m3/h.
• Fin space 7mm.
• Electric defrost in block and drip tray with a total power consumption of 24.7 kW.
• Stainless steel block/coil AISI304-FIN aluminum.
• Coil volume 69.3L.
Mentioned cooling capacity of 70kW is with the refrigerant CO2/R744 at an evaporation temperature of -4.5°C at an air inlet/outlet temperature of +4°C/0.1°C. Maximum working pressure 40 bar, test pressure 58 bar. Evaporator comes with PED printing certificate.
|
|
2012 |
|
More information |
| Goedhart / Kelvion |
|
cooling-/freezing evaporator, type of refrigerant: CO2/R744 |
|
73 kW |
|
Used cooling-/freezing evaporator, brand Goedhart/Kelvion type AU.s. This in condition as new (only used 1800 hours) CO2 pump circulation cooling-/freezing evaporator is designed as a down flow evaporator (air vertically downwards, top-down) and is very suitable for example for cooling broilers, various carcasses in line. We can also design the evaporators as horizontal blowing air coolers at an additional cost and possibly for hot gas defrosting. Specification as follows:
• 5 or 6 pieces ventilators (each Ø800, 1.450RPM, 2,2kW)
• Air flow 75.000m3/h
• Fin space air in/out 10mm/7mm
• Defrost through air
• Material Cu / Al seawater resistant
• Volume 147 Ltr
Mentioned cooling capacity of 73kW is with refrigerant CO2/R744 at an evaporating temperature -7°C with an air outlet temp. of 6,4K. Note: Evaporator is supplied with pressure certificate.
42 pieces in stock of which 21 pieces with 5 fans and 21 pieces with 6 fans.
|
|
2018 |
|
More information |
| Helpman/Alfa Laval |
|
THOR-458-7-B-NC24/400-E4 used water/glycol cooler, type of refrigerant: Water/Glycol |
|
75 kW |
|
Used one-sided blowing water/glycol cooler, brand Helpman/Alfal Laval type THOR-458-7-B-NC24/400-E4. This in very good condition one-sided blowing water/glycol cooler is equipped with:
• 5 pieces ATB ventilators each Ø560, 0,75kW, 1410RPM
• Air flow 42.300 m3/h
• Fin space 7 mm
• Air throw 28 m
• Block volume 141 dm3
• Surface 450 m2
• Electric defrost in block (42,7kW) and drip tray (12,2kW)
Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol range of -3°C / +3°C and an air inlet temp. of +6°C.
|
|
2004 |
|
More information |
| VAHTERUS |
|
PSHE 5LL – 134/1/1 used q-plate evaporator, type of refrigerant: R410A/R717/CaCl2 |
|
177 kW |
|
Used Q-plate evaporator brand VAHTERUS type PSHE 5LL – 134/1/1. This, in very good condition Q-plate evaporator is designed for brine/CaCl2 30% application with specification as:
• Working with the refrigerant R410a/R717
• Connected to a low-pressure separator for natural circulation
• Delivery with required pressure certificate
Mentioned cooling capacity is with the refrigerant R410a at an evaporating temperature of -46.6C° and a brine/CaCl2 30% range of -38.5°C /-40°C.
|
|
2005 |
|
More information |
| Thermowave |
|
TL500 KDGL used discharge gas / exchanger, type of refrigerant: NH3/Glycol |
|
200 kW |
|
Used and in very good condition: Thermowave discharge gas / exchanger ( use for heat recovery capacity). Equipped with all necessary TÜV certificates. Mentioned heat recovery capacity of 200 kW is at an ammonia discharge gas inlet temperature of + 80°C on the primary side of the exchanger and an uitlet temperature of ammonia discharge gas of + 50°C. On the secondary side a water glycol inlet temperature of + 45°C and an outlet temperature of + 55°C with a volume flow of 18350L / h.
|
|
1997 |
|
More information |
| Alfa / Laval / Witt |
|
AN 76-60-H used plate heat exchanger, type of refrigerant: NH3 |
|
210 kW |
|
Used and in condition as new, plate heat exchanger, with matching separator for natural NH3/ammonia circulation (no NH3 liquid pumps needed). Design: built on a frame: 3 pieces RVS plate heat exchangers type AN 76-60-H, 3 pieces stainless steel Sawa water pumps type ZA18-80/50-MM, 5,5kW each, 17,5m³ per pomp max., NH3 separator 2400 x 60. PED certificates available. Mentioned cooling capacity is at an evaporating temperature of 0°C.
|
|
2009 |
|
More information |
| RETECH |
|
LSN 1853/1255-5826 AD used freeze evaporator, type of refrigerant: R717/Ammonia |
|
260 kW |
|
Used and in very good condition: standing freeze evaporator/blast freeze evaporator for ammonia pump circulation application. This hot-dip galvanized evaporator is equipped with 3 pieces MEZ high pressure ventilators of11 kW each and air volume 42000 m³/h,in total 125000 m³/h air volume, 3 evaporator blocks of 86.7 kW each at -40°C NH3, total 260 kW with the dimensions of 298x110x150 cm per block, contents of block 270 litres. Fin spacing 20 mm air intake side. Note: this freeze evaporator is very suitable for a spiral freezer or freeze bunker.
|
|
1999 |
|
More information |
| Alfa Laval |
|
M10-BWFDR used plate heat exchanger, type of refrigerant: NH3/Glycol |
|
500 kW |
|
Used and in good condition, Alfa Laval NH3/glycol plate heat exchanger, with matching separator for a natural NH3/ammonia circulation (no NH3 liquid pumps needed). All necessary water pumps brand Grundfos and PED certficates available. Mentioned cooling capacity is at an evaporating temperature of -10°C of the ammonia on the de primary side of the plate heat exchange rand on the secondary side of the heat exchanger glycol in 0°C and out -5°C at 55m³/h.
|
|
2006 |
|
More information |
| Evapco |
|
IPCA-4411 used ice water battery / ice bank, type of refrigerant: Ethyleen/Glycol |
|
510 kW |
|
Used and in a good condition: ice water battery / ice bank, brand of Evapco, type IPCA-4411, consists of a galvanized steel pipes bundle, PVC air distribute pipe mounted to the bottom of the pipe bundle. This ice battery will be delivered without storage tank / reservoir. Technical data: ice buffer latent total of 510kW, ice thickness of 35mm on de pipes bundle, glycol rate of 30%, setup time of 12 hours, glycol mixture flow rate 2.75L/s, ice meltdown period of 12 hours.
|
|
2002 |
|
More information |
| Alfa Laval |
|
M10-BWREF used plate heat exchanger, type of refrigerant: NH3/Water |
|
531 kW |
|
Used, in good condition, Alfa Laval plate heat exchanger, type M10-BWREF, serial nr. 30104-40864, inlet/outlet volume 72,2/71,2 m³. This plate heat exchanger can be delivered with a low pressure separator fort natural circulation. Mentioned cooling capacity is at an evaporating temperature of 0°C and a cold water outlet temperature of ± 6°C.
|
|
2004 |
|
More information |
| Alfa Laval Vicarb |
|
V45-1794 used plate heat exchanger, type of refrigerant: NH3/Glycol |
|
700 kW |
|
In good condition: plate heat exchanger, evaporating temperature -12°C, water/glycol in -4°, out -8°C. Volume 118,6 L. This heat exchanger can be delivered with a NH3 -12°C separator for a natural circulation.
|
|
1993 |
|
More information |
| CIAT |
|
FYH-660-40C-6B202 shell and tube heat exchange, type of refrigerant: NH3/R717 |
|
777 kW |
|
Used shell and tube DX heat exchanger. This in very good condition DX heat exchanger is designed for a capacity of 777kW at an evaporating temperature of approx. -12°C with the refrigerant R717/ammonia and a water/glycol range of -3°C/-5°C at a liquid volume of 92,5L/s, fluid resistance 70kPa, connections/ flange sizes 250mm.
Note: Shell and tube heat exchanger will be delivered with all necessary pressure certificates.
|
|
2005 |
|
More information |
| Alfa-Laval |
|
A15-BWFD used plate heat exchanger, type of refrigerant: Ammonia/Glycol |
|
1060 kW |
|
Used and in good condition plate heat exchanger, brand Alfa-Laval type A15-BWFD, serial number 30101-36097 for ammonia/glycol application (ammonia out/in S1/S2, glycol out/in S4/S3), volume 229,5L and equipped with certificates.
Mentioned capacity is at a glycol outlet temp. of -10°C.
|
|
1996 |
|
More information |
| Alfa-Laval |
|
MK15-BWFGR used plate cooler/ plate exchanger, type of refrigerant: Ammonia/Glycol |
|
1160 kW |
|
Used plate cooler/ plate exchanger, brand of Alfa-Laval, type MK15-BWFGR. This plate cooler in good working condition, works with the refrigerant Ammonia, designed for a water inlet temperature of +5.5°C and a water outlet temperature of +1.5°C with a water flow of 66.22kg/s, material of the plate cooler ASIS 316. Mentioned cooling capacity is with an evaporating temperature of 0.5°C of ammonia. For more technical information, please contact us.
|
|
2004 |
|
More information |
| Thermowave |
|
TL 50 KCIL TL650 KCIL, type of refrigerant: NH3/Glycol |
|
2000 kW |
|
Used (as new 2011): young Thermowave water/glycol chiller for industrial application. This installation consists of 2 pieces Thermowave plate heat exchangers for natural circulation coupled to a surge drum with a contents of 9973 Ltr., 3 pieces water/glycol KSB pumps and a switch-board with new PLC for control of the installation. The installation is delivered with a compressor installation of your choice Sabroe, Grasso or Mycom. Note: this installation will be delivered completely will all required PED/TüV certificates and cool technical drawings. Mentioned cooling capacity is at a water/glycol outlet temperature of -5°C and an inlet temperature of -1°C, flow ±220m³ per plate heat exchanger.
|
|
2011 |
|
More information |
| Alfa-Laval |
|
T35-PFG used plate heat exchanger, type of refrigerant: Water/Glycol |
|
2083 kW |
|
Used and in condition as new plate heat exchanger, brand Alfa-Laval type T35-PFG. Serialnr.: 30110-33665 for water/glycol application with specification as:
• Inlet S4 +27C° outlet S3 +24C°, flow 600 m3/h, pressure drop 19,81kPa
• Inlet S2 +6C° outlet S1 +12C°, flow 297 m3/h, pressure drop 6,015kPa
• Plate material ALLOY 304
• Plate thickness 0.40 mm
Mentioned capacity is at a water/glycol inlet temp. of +6°C.
|
|
2018 |
|
More information |
| Alfa Laval |
|
BWFDR used plate heat exchangers /coolers, type of refrigerant: NH3/Glycol |
|
3000 kW |
|
Used, in condition as new: Alfa Laval water/glycol chiller for industrial application. This cooling installation/chiller consists of the following main components: 4 pieces Alfa Laval plate heat exchangers /coolers type M10-BWFDR and BWREF for natural circulation coupled to a surge drum with a contents of 12000 Ltr., KSB pumps with control valves, switch-board with new PLC and touch screen for the control of the complete installation. The chiller/cooling installation is delivered with a complete used cooling installation of your choice Sabroe, Grasso or Mycom. Note: this installation will be delivered completely will all required PED/TüV certificates and drawings. Mentioned cooling capacity is at a water/glycol outlet temperature of -5°C and an inlet temperature of -1°C, flow ±150m³ per plate heat exchanger.
|
|
2001 / 2004 |
|
More information |