Buy and Sell Used Industrial Refrigeration Equipment - T +31 (0)297 565 443 - info@comronbv.com

Spiral- tunnel- IQF- flow- blast- plate & belt freezers

IMG_8289_232kw.flow freezer.jpg
IMG_8289_232kw.flow freezer.jpg IMG_8301_232kw.flow freezer.jpg IMG_8295_232kw.flow freezer.jpg IMG_8293_232kw.flow freezer.jpg IMG_8299_232kw.flow freezer.jpg

Description / remarks: 

Used Flow Freezer with Glazo Freezer. These in good condition flow freezer was used for freezing bits of Kebab meat, but it is suitable for various products, such as vegetables and fruit products, shrimps, fries, etc . Specifications of these used freezers:

  • Frigoscandia Flow Freezer model MX32, manufacture nr 240065, year of manufacture 1995, 3 x 380 V – 3 x 460 V 50/60 Hz 42 kW/67 kVA E-power, capacity of 1950 kg/h based on peas with an input temperature of +15°C and an output temperature of -18°C, refrigerant R717/Ammonia/Freon pump circulation. Flow freezer is equipped with ADF (automatic defrost system for a longer continuous blast freeze process, max. 22 hour production), 1 piece galvanized cooler and stainless steel switch box with Siemens PLC. Plastic two-stage belt system (patent by Frigoscandia) which works as follows: two separate plastic belts goes into the tunnel in line after each other with a pre-freeze section where the products are slightly frozen on the outside, then the products go to the after-freeze section (2nd belt) where the products are frozen into the core up to a minimum temperature of -18°C.
  • Frigoscandia Glazo Freezer model P4, year of construction 1995, 380 – 460 V 50/60 Hz, 3 Ph 9 kW/11.5 kVA E-power, 80 dB, weight 2000kg, capacity 1950kg/h based on peas with an input temperature of +15°C and an output temperature of 0°C, refrigerant R717/Ammonia/Freon pump circulation. Glazo freezer is equipped with stainless steel s infeed shaker, tray width 900 mm, input/output height 1300mm / 725 mm, dimensions of isolated housing (LxWxH) 2230 mm x 3150 mm x 2020 mm. Evaporating block with ventilator motor. Cooling capacity of the Glazo Freezer is approx. 35 kW at evaporating temp. of -10°C.
  • The Glazo Freezer that is placed in line with the Flow Freezer works according to the following principle: the product that comes from the production line will be frozen partially on the outside before it will be distributed over the belt of the Freezer by the infeed shaker, it gives extra capacity in the Flow Freezer.

Freezer will be delivered with original floor, but without panels/housing. Further, the freezer will be completely checked by Comron International after sale in case of mechanical/electrical defects. The gearboxes will be supplied with new oil, the evaporator blocks will be tested on nitrogen pressure and the flow freezer will be delivered with a 3 months guarantee on the main components.


Cooling capacity:
232 kW/68 tons
Type of refrigerant:
R717/Ammonia/Freon Pomp
Voltage:
380 / 460 V
Absorbed power:
56 kW
Year of Manufacture:
1996
Dimensions (LxWxH):
380 x 470 x 370 cm
Comron Used To Cool