| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| DWM/Copeland / Helpman |
|
storage / freeze Installation -60°C/-65°C, type of refrigerant: R23+R404A |
|
14 kW |
|
Used, very special low temperature DWM/Copeland/Helpman storage/freezing installation (cascade system) and consists of the following main components:
• Cascade central compressor unit, consists of:
1 x semi-hermetic DWM low pressure compressor, working with refrigerant R23 at evaporating temperature of -68°C
2 x semi-hermetic high pressure compressors, working with refrigerant R404A at evaporating temperature -30°C
• 2 x Helpman single sided blowing low temperature evaporators with each 2 pieces ventilators of 750W, electrical defrost, air flow 10.400m3/h, dimensions 210 x 110x 70 cm and weight 110kg
• 1 x Helpman double sided blowing evaporator for the production room(sluice) -20°C ambient temp. with 3 ventilators of 250W, electrical defrost, air flow 5.400m3/h, dimensions 345 x 170 x 59cm, weight 325kg with a cooling capacity of 28kW at evaporating temperature of -30°Cl
• 1 x Helpman air-cooled condenser with copper/seawater resistant fin coils
• Switch-board
• Under-pressure and over-pressure valves
Mentioned cooling capacity is with the refrigerant R23+R404a at -68°C/-30°C, -30°C/+40°C.
This installation is suitable for a freeze storage of approx. 600m3with a storage temperature of -60°C to -65°C, very suitable for tuna storage.
|
|
2001 |
|
More information |
| Bitzer |
|
4H-15.2Y low temprature freezing installation, type of refrigerant: R23/R717 |
|
25.3 kW |
|
Used, very special low temperature Bitzer storage/freezing installation (cascade system), suitable for very low storage temperatures of -60°C/-65°C and consists of the following main components:
• 1 x low pressure compressor, Bitzer type 4H-15.2Y, working with refrigerant R23 at evaporating temperature of -68°C and equipped with:
Capacity control 50% / 100%
Oil separator
Manometer set with all required safety devices
• Cascade Condenser of 40kW at -33°C / -40°C with R23/Ammonia R717, internal surface 21m2, RVS AISI-316
• Expansion tank, 1.420Liter, R23, min. temp. -10°C max. temp. +50°C
• Custom made switch-board
Mentioned cooling capacity is with the refrigerant R23/Ammonia R717 at -68°C/-33°C
This installation is very suitable for freezing tuna, for example, where high quality product is required. For frozen storage approx. 2.000 m3 with two units.
Note: The unit must be connected with the cascade condenser to an ammonia installation at -30°C/-40°C.
|
|
2004 |
|
More information |
| Bitzer |
|
6F-40.2Y low temprature freezing installation -60°C/-65°C, type of refrigerant: R23/R717 |
|
51 kW |
|
Used, very special low temperature Bitzer storage/freezing installation (cascade system), suitable for very low storage temperatures of -60°C/-65°C and consists of the following main components:
• 1 x low pressure compressor, Bitzer type 6F-40.2Y, working with refrigerant R23 at evaporating temperature of -68°C and equipped with:
Capacity control 33% / 67% / 100%
Oil separator
Manometer set with all required safety devices
• Cascade Condenser of 105kW at -33°C / -40°C with R23/Ammonia R717, internal surface 283m2, RVS AISI-316
• Expansion tank, 1.795Liter, R23, min. temp. -10°C max. temp. +50°C
• Custom made switch-board
Mentioned cooling capacity is with the refrigerant R23/Ammonia R717 at -68°C/-33°C
This installation is very suitable for freezing tuna or storing tuna, where high quality product is required. For freezing tuna, a maximum of 800kg/h of product can be achieved with two units. For frozen storage approx. 4,000 m3 with two units.
Note: The unit must be connected with the cascade condenser to an ammonia installation at -30°C/-40°C.
|
|
2004 |
|
More information |
| Bitzer/Guntner |
|
used complete freezing installation, type of refrigerant: R717/Ammonia |
|
60 kW |
|
Used complete Bitzer/Güntner freeze/pump installation build in a container. This in very good condition complete freeze pump installation is composed of the following main components:
• Bitzer screw piston package opentype ASNA 7471-K
1 piece GEA/Grasso two stage piston compressor type RC4212 (direct driven)
• MEZ 55kW E-motor 3000 RPM
• Low 1 pressure separator, brand LCB, volume 480Ltr with 2 pieces Witt liquid pumps
• Eco-tank -15°C
• 1 piece Güntner air-cooled condenser type S-AGVH-090.2a/2-NO
• Complete control cabinet with PLC
• All necessary control stations, stop valves, liquid valves, floats with brands such as Danfoss, Parker, Witt
• All required pressure test certificates
Mentioned cooling capacity is with the refrigerant R717/ammonia at -35°C/+40°C at 3000RPM.
Capacity with frequency controller 60Hz 3600 RPM approx. 73kW
|
|
2006 |
|
More information |
| Bitzer |
|
HSN 7471-75-40R Bitzer storage freezing installation, type of refrigerant: R404A/All Freon |
|
83 kW |
|
Used and in very good maintained condition (always maintained by GEA) storage freezing installation, brand Bitzer/Goedhart. This storage freezing installation will be composed of the following main components:
• 1 piece Bitzer screw package type HSN 7471-75-40R
• Bitzer screw package is equipped with oil separator, air-cooled oil cooler, closed intercooler for subcooling liquid coupled to the eco. compressor, Bitzer liquid tank of 180L
• Suction manifold with suction filter
• Manometer set low/high pressure with all necessary safety devices
• Complete control box with Eliwell step controller
• 4 pieces Goedhart VCI-B-82508EF freeze storage evaporators with electric defrost
• Cabero air-cooled condenser type ACHSD099MB / 2L-26D, year of 2016
Mentioned cooling capacity is with the refrigerant R404a/R507 at -30°C /+40°C.
This installation is suitable for a deep-freeze storage of approx.. 4000m3 storage space with a storage temperature of -20°C.
|
|
2005/2016 |
|
More information |
| Lennox |
|
FCK 100N used rooftop, type koudemiddel: R407C |
|
97 kW |
|
Used roof top unit, brand Lennox, type FCK 100N. This in very good condition roof top unit is equipped with the following main components:
• 2 pieces scroll compressors
• 1 piece inside-/centrifugal ventilator (5,5kW/833 RPM)
• 3 pieces outside ventilators (each 3,75kW/1000RPM)
• Climatic 2 controller
• Nominal airflow 20.000m3/h
• Noise level 91dB(A)
Mentioned cooling capacity of 97kW is with 25% fresh air, 35°C DB out , 27°C in with a COP 2.
|
|
2004 |
|
More information |
| Bitzer/Goedhart |
|
used cool/freeze installation, type of refrigerant: R507 |
|
100 kW |
|
Used, in very good condition complete Bitzer/Goedhart cooling/freezing combination (very suitable for 0°C, -10°C, -20°C storage temperatures) and consists of the following main components:
• 2 pieces Bitzer cool/freeze units with each:
2 pieces Bitzer 4P-15.2Y-40P compressors
1 piece 6J-33.2Y-40P compressor
• 10 pieces Goedhart cooling/freezing evaporators, type VNS-65457 with electrical defrost and each 5 pieces WOODS ventilators 220V/310Watt
• 1 piece Goedhart air-cooled condenser type KOAL-M66 710.6P with 2 separate sections
• Switch-board
Mentioned cooling capacity of 100kW is with the refrigerant R507 at evaporating temperature of -30°C.
Cooling capacity at an evaporating temperature of -10°C is 248kW.
|
|
2004 |
|
More information |
| Bitzer/Searle/GEA |
|
complete cooling plant, type of refrigerant: R404A/All Freon |
|
112 kW |
|
Used complete Bitzer/ Searle/GEA cooling plant-/installation. This in very good condition complete cooling plant is composed of the following main components:
• Bitzer piston package consists of
1 piece Bitzer piston compressor type 6H-35.2Y (frequency controlled at 60Hz)
1 piece Bitzer piston compressor type 4G-20.2Y
Oil separator, Vertical liquid tank, high/low pressure gauges with all necessary safety devices
• 3 pieces Searle/GEA dual-discharge blowing cooling-/freezing evaporators type LSR122-64-4D-EL, each with air volume 3,6m3/s, fin spacing 4mm, electrical defrost
• 2 pieces Searle/GEA dual-discharge blowing cooling-/freezing evaporators type DSR100-4L each with air volume 1,7m3/s, fin spacing 4mm, electrical defrost
• 1 piece Searle/GEA one-sided blowing cooling evaporator type DSR100-4L with air volume 2,7m3/s, fin spacing 4mm, electrical defrost
• 1 piece Searle/GEA air-cooled condenser type MEC234-N604D AL
• Complete control cabinet with Danfoss frequency controller
Mentioned cooling capacity of 112kW is with the refrigerant R404 at -8°C/+45°C.
|
|
2011 |
|
More information |
| GEA/Grasso/Goedhart |
|
used complete freezing pump installation, type of refrigerant: R717/Ammonia |
|
138 kW |
|
Used complete GEA/Grasso/Goedhart storage freezing pump installation. This in very good condition complete freezing installation is composed of the following main components:
• GEA/Grasso piston package consists of
1 piece GEA/Grasso two stage piston compressor type RC4212 (direct driven)
Schorch 90kW E-motor 1000RPM
Oil separator
• 3 pieces Goedhart one-sided blowing freezing evaporators type VRB 63638, each with stainless steel coil, air volume 37.717m3/h, fin spacing 8mm, hot gas defrosting in coil and drip tray
• Low 1 pressure separator, brand GEA/Prevesco, volume 1425Ltr with 1 piece Witt liquid pomp
• 1 piece Goedhart air-cooled condenser type FEAL-90M/4-6P
• Complete control cabinet with PLC
• All necessary control stations, stop valves, liquid valves, floats with brands such as Danfoss, Parker, Witt
Mentioned cooling capacity of 138kW is with the refrigerant R717/ammonia at -32°C/+30°C at 1000RPM.
|
|
2000 |
|
More information |
| Bitzer |
|
used freeze-pump installation, type of refrigerant: NH3 Ammonia |
|
140 kW |
|
Used and in condition as new (only 1 year in production) complete Bitzer 2-stage freeze-pump installation built on a steel frame and consists of the following main components:
• 3 pieces low pressure (booster) screw compressors open type OSKAB 7471 with each a 30kW E-motor
• 2 pieces high pressure screw compressors open type OSKA 7451 with each a 55kW E-motor
• 2 x oil separator 881 Ltr for the low and high pressure side
• Water cooled oil cooler type plate heat exchanger brand Alfa Laval coupled to an air-cooled Güntner dry cooler type GFH 0678/2N
• Horizontal low pressure separator 640 Ltr -40°C with 2 pieces Hermetic Cam 1/3 NH3 liquid pumps (combined with the intermediate pressure separator)
• Horizontal intermediate pressure separator 640Ltr -6°C coupled to a plate cooler/ heat exchanger for natural circulation, ± 130kW to be used for glycol cooling if necessary (combined with the low pressure separator)
• Air-cooled condenser or evaporating condenser at choice
• Custom made control box with new Siemens PLC/Simatic touchscreen
• All necessary certificates for PED
• Cool technical and electrical drawings
• Custom made Software
Mentioned cooling capacity of is with the refrigerant R717 at -40°C/ +40°C.
|
|
2006 |
|
More information |
| Daikin |
|
ERAD 170 E-SS012 used condensing unit, type of refrigerant: R134A |
|
165 kW |
|
Used complete Daikin condensing unit type ERAD-170 E-SS012 for outdoor application. This in new condition condensing unit is equipped with:
• Daikin mono screw compressor type HSA312QS6YA (400/460V, 50/60Hz) with stepless capacity control
• Control box
Mentioned cooling capacity is with the refrigerant R134a at an evaporating temperature of 0 °C. Capacity at evaporating temperature of -10 °C is approx. 85kW.
|
|
2014 |
|
More information |
| Grasso/GEA |
|
FX PP 2 x 650 duo used freeze-pump installation, type of refrigerant: R717/Ammonia |
|
260 kW |
|
Used Grasso/GEA freeze-pump installation. This in very good maintained condition freeze-pump installation will be composed of the following main components by Comron International:
1 Pieces Grasso/GEA screw package, consist of two pieces Grasso/GEA screw compressors, type M-1 (DUO), 2 pieces 160 kW Schorch E-motors, vertical oil separator with water cooled or thermosiphon oil cooler, oil pump, eco connection on the compressors, control cabinet with the starters relays and PLC
New low pressure separator -40°C (Surge-Drum) volume 2m³ with 2 pieces ammonia liquid pumps
New eco vessel -10°C
Custom made switch-board cabinet with new Siemens S7 PLC/Simatic touchscreen
Custom made software for control the whole system
Baltimore/Evapco evaporating condenser of your choice
All required valves, Danfoss PM valves, floaters, electronic controllers
E-diagrams, P&ID drawings
All pressure certificates and drawings for the vessels
For an additional charge we can provide the installation with two frequency controllers for control the speed of the compressors
The mentioned cooling capacity of 260kW is with refrigerant R717/ammonia at -40°C/+35°C and the capacity with 60Hz 3600 rpm will be 310kW.
|
|
2006/2023 |
|
More information |
| Bitzer / Heplman |
|
used cooling installation, type of refrigerant: R507 |
|
373 kW |
|
Used complete Bitzer / Helpman cooling installation for processing rooms and or corridors. This in very good maintained condition cooling installation consists of the following main components:
• Bitzer cooling plant (built in a 10 ft container for outdoor installation), equipped with 3 pieces 6F-50.2Y compressors, oil separator, switch-board, liquid tank
• Helpman / Alfa-Laval air-cooled condenser type HTC-100-253-410-CT-400V
• 14 pieces Helpman double-sided evaporators type Thor-D-436-7-L-42 / 5-220V
• P&ID drawing and the necessary certificates
Mentioned cooling capacity is at an evaporating temperature of 0 ° C.
|
|
2005 |
|
More information |
| GEA/Grasso |
|
CO2 freeze pump installation / 5HP, type of refrigerant: CO2/R717 |
|
456 kW |
|
Used CO2 Grasso/GEA industrial freeze pump installation. This in very good condition CO2 freezing pump installation with a cooling capacity of approx. 456 kW at -40°C/ +35°C and consist of the following main components:
3 pieces Grasso/GEA 35 HP piston compressors R744/CO2, capacity 152 kW at -40°C / -10°C piston packaging equipped with:
- Meter set
- Oil separator
- All safety switches
- E-motor ROAD 45kW / 400V / 50Hz / 1475 RPM – 440V / 60Hz / 1770 RPM
GEA/Grasso MB-5BFU high pressure screw package existing from:
- 200 kW E-motor / year of manufacture 2015
- Oil separator
- Thermosiphon
- Oil cooler shell and tube type Grasso
- Siemens PLC controller
Tranter Cascade exchanger / type SPW-075-H-08-348-1-1-W Mantel shell: Ammonia
Plates: CO2 capacity 800 kW at -6°C condensing.
Low pressure separator CO2(-45/-40°C surge drum)m³. To be delivered new by Comron International BV complete with 2 pieces of CO2 hermetic liquid pumps and all necessary valves and safety switches.
Low pressure separator ammonia (-10°C surge drum) brand Polar with a capacity of 2m³ for natural ammonia circulation year of manufacture 2004.
Evapco evaporative condenser type ATC-M252-TG built in 2010 complete with water pump 2.2 kW, water heaters, heating element. Capacity with a condensation temperature of +35°C/wet bulb +22°C is 944kW High pressure liquid tank brand Romer 1,100 liters / year of manufacture 2010.
Witt high-pressure float.
Complete custom-made control cabinet with new wiring.
- New Siemens PLC with touch screen type 1200.
- Frequency converter for the 200 kW E-motor of the Gea/Grasso high pressure screw package
- Custom made software for the whole installation.
Installation comes with all necessary pressure certificates.
All requested valves, Danfoss control stations, floaters, P&ID drawings.
Mentioned cooling capacity is with the refrigerant CO2/Ammoniac
CO2 -40/-10 NH3 -10/+35
|
|
2011/2015 |
|
More information |
| Howden |
|
complete freezing-pump installation, type of refrigerant: R717/Ammonia |
|
466 kW |
|
Used and in very good maintained condition complete Howden freezing-pump installation. This, complete freezing-pump installation has been composed of the following main components by Comron International:
• 2 pieces Howden screw compressors/package, compressor type MK6B/WRV20414550/679
• Each screw package/unit equipped with Leroy-Somer 200kW E-motor, water-cooled shell&tube oil cooler, vertical oil separator, oil pump, closed intercooler eco, control box with new Siemens S7 PLC/Simatic touchscreen
• Low pressure separator -40°C brand Cofrin volume 3,5m3 built on frame with 2 pieces Hermatic CAM 2/3 ammonia liquid pumps
• High pressure liquid tank brand Cofrin volume 1,5m3
• Oil cooling through a Baltimore cooling tower type VFL 241 HXR
• Evapco evaporating condenser type LSCB-185
• Custom made switch-box with new Siemens S7 PLC/Simatic touchscreen, Siemens soft starters for the 200kW E-motors and new software
• All requested valves, Danfoss control stations, floaters, P&ID drawings, E-drawings and PED pressure certificates
Mentioned cooling capacity is with the refrigerant R717 at-40°C /+35°C with eco, absorbed power approx.. 350kW.
This installation is very suitable for all types of spiral, tunnel, IQF, flow, blast, plate & belt freezers.
|
|
2006 |
|
More information |
| Gram / Frick |
|
freeze pump installation, type of refrigerant: NH3 Ammonia |
|
500 kW |
|
Used, in very good maintained condition Gram/Frick complete freezing pump installation and consists of the following main components:
• 1 x Gram GSVII-111 screw package (year 1998) with a 250kW Schorch E-motor
• 1 x Gram GSV-147 screw package (year 2002) with a 250kW Leroy Somer E-motor
• Each screw package equipped with:
Oil separator
Oil cooler
Gram processor
• Vertical low pressure separator -40°C, volume 6m3
• Eco tank, volume 482 Liters
• High pressure tank
• Air-cooled condenser (If desired, it can be also delivered with an evaporating condenser)
• Switch-board cabinet with Siemens PLC
Mentioned cooling capacity of 500kW is with the refrigerant R717/ammonia at -40°C /+30°C.
|
|
1998/2002 |
|
More information |
| Grasso/GEA |
|
FX PP 2 x 650 duo used freeze-pump installation, type of refrigerant: R717/Ammonia |
|
520 kW |
|
Used Grasso/GEA freeze-pump installation. This in very good maintained condition freeze-pump installation will be composed of the following main components by Comron International:
2 Pieces Grasso/GEA screw package, each consist of two pieces Grasso/GEA screw compressors, type M-1 (DUO), 2 pieces 160 kW Schorch E-motors, vertical oil separator with water cooled or thermosiphon oil cooler, oil pump, eco connection on the compressors, control cabinet with the starters relays and PLC
New low pressure separator -40°C (Surge-Drum) volume 3m³ with 2 pieces ammonia liquid pumps
New eco vessel -10°C
Custom made switch-board cabinet with new Siemens S7 PLC/Simatic touchscreen
Custom made software for control the whole system
Baltimore/Evapco evaporating condenser of your choice
All required valves, Danfoss PM valves, floaters, electronic controllers
E-diagrams, P&ID drawings
All pressure certificates and drawings for the vessels
For an additional charge we can provide the installation with 4 frequency controllers for control the speed of the compressors
The mentioned cooling capacity of 520 kW is with refrigerant R717/ammonia at -40°C/+35°C and the capacity with 60Hz 3600 rpm will be 620 kW.
|
|
2006/2023 |
|
More information |
| Grasso/GEA |
|
used refrigerator/freezer package, type of refrigerant: R717/Ammonia |
|
556 kW |
|
Used Grasso/GEA cooling-/freezing package. This in very good maintained condition cooling-/freezing package will be composed of the following main components:
• On frame-built 2 pieces of Grasso/GEA (DUO) screw package, equipped with:
2 pieces Grasso/GEA screw compressors type G1, one with a 97 kW Schorch E-motor equipped with a frequency controller, and the second with a 75 kW Schorch E-motor without frequency controller
Central oil separator
Thermosiphon oil cooler, shell & tube type
Control box with a Siemens S7 PLC / Simatic touch screen built by Comron
• Low pressure separator (surge drum) brand Polar, volume 2m3 complete with 2 pieces ammonia liquid pumps
• Switch board cabinet with Danfoss frequency controller, supplied with a Siemens S7 PLC / Simatic touchscreen
• Evaporating condenser of your choice
• All required pressure test certificates
The mentioned cooling capacity of 556 kW is with the refrigerant R717/Ammonia at an evaporating temperature of -8°C.
Cooling capacity at evaporating temperature of -40°C is 130 kW.
|
|
2004 |
|
More information |
| Grasso/GEA/Baltimore |
|
used industrial NH3/CO2 cooling plant/frozen storage installation, type of refrigerant: R717/CO2 |
|
560 kW |
|
Used industrial cooling/freezing installation brand Grasso / GEA / Baltimore. This fine and very well maintained cooling/freezing installation with a capacity of 560 kW (840 kW with 3 compressors) -6°C/CO2 and 150 kW -33°C/CO2 is composed of the following main components:
• 3 pieces NH3 Grasso/GEA direct driven piston compressors type V 600 of which 1 stand-by, each equipped with ABB 100kW E-motor frequency-controlled, latest GEA controller. Capacity each compressor is 365kW at -8°C/+32°C with an absorbed power 79kW.
• 2 pieces Baltimore hybrid evaporating condensers type CXVE 151 0809-10L. Capacity each condenser is 547kW at wet bulb temp. of +21°C and condensation temp. of +32°C.
• Hansen Air Purger.
• Horizontal -10°C NH3 separator, internally connected to the cascade CO2 condenser with natural CO2 circulation -6°C.
• Horizontal -6°C CO2 liquid separator complete with 2 pieces hermetic CO2 liquid pumps.
• Oil equalizer tank (collection system) connected to the NH3 separator with automatic return system.
• -33°C CO2 frozen storage plants 150 kW with 3 pieces Dorin CO2 piston compressor -33°C/-6°C.
• 10 pieces Coolers and Condensers evaporators type pump circulation CO2, equipped with 3 pieces ventilators (3 x 0,39kW), hot glycol defrosting. Capacity is 33 kW at evaporating temp. of -4°C at air inlet temp. of +2°C.
• 6 pieces Coolers and Condensers evaporators type pump circulation CO2, equipped with 2 pieces ventilators (2 x 1,77kW), hot glycol defrosting. Capacity is 38 kW at evaporating temp. of -4°C at air inlet temp. of +2°C.
• 4 pieces Coolers and Condensers evaporators type pump DX CO2, equipped with 2 pieces ventilators (2 x 0,6kW), electric defrosting. Capacity is 17,5 kW at evaporating temp. of -31°C at air inlet temp. of -25°C.
• Switchboard cabinet with Siemens S7/Simatic touchscreen, Danfoss frequency controller for the 3 pieces Grasso/GEA compressors and the fans of the Baltimore condensers.
|
|
2015 |
|
More information |
| Grasso |
|
/ SP2 ZE-6BN used freeze pump installation, type of refrigerant: R717/Ammonia |
|
578 kW |
|
Used Grasso/GEA freeze pump installation. This in very good condition freeze pump installation (compressors and E-motors completely overhauled) will be composed of the following main components:
• On frame-built two-stages screw compressors consisting of:
1 piece low pressure Grasso screw compressor (booster) type Z-61 with a 200kW Schorch E-motor,
1 piece high pressure Grasso screw compressor type P-1 with a 160kW Schorch E-motor,
Central oil separator, oil pump, thermosyphon oil cooler,
Switch-board cabinet with starter packages and new Siemens S7 PLC/Simatic touchscreen
• Low pressure separator volume 3m³ with 2 pieces ammonia liquid pumps
• Eco vessel
• High pressure liquid receiver
• Air-cooled condenser or evaporating condenser of your choise
• All required pressure certificates
• 1 year warranty
The mentioned cooling capacity of 578 kW is with refrigerant R717/ammonia at an evaporating temperature of -40°C and a condensing temperature of +35°C.
|
|
2002 |
|
More information |
| Bitzer |
|
complete cooling plant, type of refrigerant: R404A/All Freon |
|
581 kW |
|
Used and in condition as new (only 1150 hours in production) complete Bitzer cooling installation consists of the following main components:
• Bitzer cooling plant (built in an isolated container for outdoor application ) equipped with:
3 pieces Bitzer screw packages type HSK 7461-80, each package with 63 kW E-motor, oil filter, low-/high pressure gauges, low-/ high pressure switch,
Central oil separator
Vahterus heat exchanger type PHSE-3LL-108-1/1 for liquid subcooling
Complete control cabinet
• Central liquid vessel
• Evapco evaporating condenser type ATC-M252E with frequency controlled fan motor
• Refrigeration and electrical drawings
Mentioned cooling capacity of is with the refrigerant R404a at -3°C/ +35°C with an absorbed power 154 kW.
Cooling capacity at -10°C / +35°C is 435 kW.
|
|
2011 |
|
More information |
| Gram / Frick |
|
industrial freezing pump installation, type of refrigerant: NH3/Ammonia |
|
600 kW |
|
Used in very good maintained condition Gram/Frick industrial freezing pump installation and consists of the following main components:
2 x low pressure Frick screw packages, type TDSH 233S and type GSVII 147, year 2003, (cooling capacity at -40°/-12°C is 600 kW)
Each low pressure screw package equipped with:
Leroy Somer E-motor of 90 kw
New Siemens PLC / Simatic touchscreen
2 x high pressure Frick screw packages, type TDSH 163L and type GSVII-64, year 2003 (cooling capacity at -12°/+42°C is 750 kW)
Each high pressure screw package equipped with:
Leroy Somer E-motor of 160 kw
New Siemens PLC / Simatic touchscreen
All screw packages are equipped with water/glycol oil coolers, plate type
Switch-board with Siemens S7 controller
Stahlbau low pressure / medium pressure separators -40°C/-12° combined, 4,8m3/3,6m3 volume, complete with 2 pieces Hermetic cam 2/3 liquid pumps, motor 1,5kW
Güntner (water/glycol) air-cooled oil cooler (for outside application) is connected to the water-cooled oil coolers of the compressors
2 x Güntner AGV-H10132x5S (D) air-cooled condensers, each 410 kW at condensing temp. +42°C (If desired, it can be also delivered with an evaporating condenser)
All TüV certificates
Mentioned cooling capacity of 600kW is with the refrigerant R717 at-40°C /+35°C.
|
|
1998 / 2003 |
|
More information |
| Grasso |
|
/ Frigopack SP2 used freeze pump installation, type of refrigerant: R717/Ammonia |
|
856 kW |
|
Used Grasso/GEA complete two-stage Frigopack freezing-pump installation (built by Grasso / GEA for the company JBT/Frigoscandia). This in new condition two-stage Frigopack freezing-pump installation is composed of the following main components:
• Grasso/GEA two-stage screw package type BetaE-6AT, serial nr. 7917, year of manufacture 2000, equipped with:
1 piece low pressure Grasso/GEA screw compressor (Booster) type XBR coupled to a 250 kW Schorch E-motor
1 piece high pressure Grasso/GEA screw compressor type SR coupled to a 250 kW Leroy-Somer E-motor
Central oil separator, oil pump, thermosyphon oil cooler
Switchboard with star/delta switches and Siemens S7 PLC
• Low pressure separator (Surge drum), brand Armultra-LTD, volume 7,1 m3 complete with 2 pieces hermetic ammonia liquid pumps
• High pressure tank, brand Armultra-LTD volume 980 liters
• Eco vessel, brand Armultra-LTD volume 3,7 m3
• Closed intercooler, volume 240 liters coupled to the suction side -40°C for extra capacity / efficiency
• Custom made switch-board cabinet with new Siemens S7 PLC/Simatic touchscreen
• Baltimore / Evapco evaporating condenser of your choice
• All required valves, Danfoss PM control stations, floaters
• Software, E- diagrams, P&ID drawings, all required TÜV certificates
The mentioned cooling capacity of 856 kW is with refrigerant R717/ammonia at -40°C/+35°C, absorbed power approx. 490kW.
Note: The Grasso screw compressors with E-motors have been completely overhauled at Comron International and will be delivered with one year guarantee.
|
|
2002 |
|
More information |
| Grasso / GEA Frigopack |
|
SP2 used freeze-pump installation, type of refrigerant: R717/Ammonia |
|
1460 kW |
|
Used Grasso/GEA complete two-stage Frigopack SP2 freezing-pump installation (built by Grasso / GEA for the company JBT/Frigoscandia). This in new condition two-stage Frigopack freezing-pump installation is composed of the following main components:
• Grasso/GEA two-stage screw package type ZE-6BN, serial nr. 8460, built 2001/2002, equipped with:
1 piece low pressure Grasso/GEA screw compressor (Booster) type Z-61 coupled to a 200 kW Schorch E-motor
1 piece high pressure Grasso/GEA screw compressor type P-1 coupled to a 160 kW Schorch E-motor
Central oil separator, oil pump, thermosyphon oil cooler
Switchboard with star/delta switches and Siemens S7 PLC
• Grasso/GEA two-stage screw package type BetaE-6AT, serial nr. 7917, built 2000, equipped with:
1 piece low pressure Grasso/GEA screw compressor (Booster) type BET-61 coupled to a 250 kW Schorch E-motor
1 piece high pressure Grasso/GEA screw compressor type S-2 coupled to a 250 kW Leroy-Somer E-motor
Central oil separator, oil pump, thermosyphon oil cooler
Switchboard with star/delta switches and Siemens S7 PLC
• Frame 1 is equipped with:
Low pressure separator (Surge drum), brand Armultra-LTD, volume 7,1 m3 complete with 2 pieces hermetic ammonia liquid pumps
• Frame 2 is equipped with:
High pressure tank, brand Armultra-LTD volume 980 liters
Eco vessel, brand Armultra-LTD volume 3,7 m3
Closed intercooler, volume 240 liters coupled to the suction side -40°C for extra capacity / efficiency
Custom made switch-board cabinet with new Siemens S7 PLC/Simatic touchscreen
• Baltimore or Evapco evaporating condenser of your choice
• All required valves, Danfoss PM control stations, floaters
• Software, E- diagrams, P&ID drawings, all required TÜV certificates
The mentioned cooling capacity of 1460 kW is with refrigerant R717/ammonia at -40°C/+35°C, absorbed power approx. 689kW.
Note: The Grasso screw compressors with E-motors have been completely overhauled at Comron International and will be delivered with six months guarantee.
|
|
2002 |
|
More information |
| Mycom/Mayekawa/Goedhart |
|
NH3/CO2 cascade cooling plant, type of refrigerant: NH3/CO2 |
|
3828 kW |
|
Used NH3/CO2 cascade cooling plant. This, in condition as new industrial NH3/CO2 cascade cooling plant is engineered and delivered by the company ENGIE to a large chicken meat producer in the Netherlands. Baseline condition of this cooling plant: to cool down 2.700 pieces broilers of 2 kg from ±32°C to a core temperature of ±4°C in 1 hour. This industrial NH3/CO2 cooling plant is composed of the following main components:
• 1 piece Pomar horizontal NH3 separator/vessel -11°C, 770dm3, 5000 kW coupled to 3 pieces CO2 Alfa-Laval condensers type plate, capacity at -11°C/-7°C is 1250kW per condenser.
• 1 piece Pomar CO2 liquid vessel/separator -10°C, 9600dm3, 3750kW complete with 3 pieces Lederle Hermetic CO2 liquid pumps type CNF, 21 m3/h, built on frame construction
• 42 pieces Kelvion/Goedhart cooling evaporators type PLK, of which:
21 pieces with 5 fans 2.2 kW installed power per fan
21 pieces with 6 fans 2.2 kW installed power per fan , fin space 10mm, air direction blowing vertically downwards (if desired air direction blowing horizontally), material Cu/Al seawater resistant, defrosting through air (hot gas defrost possible).
• Alfa-Laval plate heat exchanger 225 kW at water inlet/outlet temp. of +18°C/+24°C coupled to the glycol line of the oil coolers compressors
• Custom-made control/switch cabinets with Siemens S7-300 PLC/touch screen (at extra cost).
• Mycom/Mayekawa heat pump installation with a maximum outlet water temp. of 69°C, consists of 1 piece piston compressor package type N6HS frequency controlled with Siemens IP55 315kW E-motor, heating capacity is 1678kW (at extra cost).
• All necessary pressure certificates, original books and electrical drawings.
Note: At an additional cost, we can supply it with a complete compressor installation with brands such as Grasso, Mycom, Howden, or Sabroe.
|
|
2018 |
|
More information |