Used and in good condition: open V-belt driven Mycom 6-cylinder cooling compressor, equipped with Leroy Somer 45kW E-motor (V-belt drive), meter set, high/low oil pressure safety devices, head cooling. Mentioned cooling capacity is at -5°C evaporating temperature and +30°C condensing temperature.

Used Mycom high pressure cooling compressor, well maintained, -10°C/+35°C.

Used cool compressor, brand Mycom type N8WA. This in very good maintained condition Mycom cooling compressor is equipped with the following main components: on frame built Mycom 8 cylinders direct drive piston cool compressor, 75kW MEC motors NV E-motor 400V/ 50z / 1485RPM, oil separator, water-cooled oil cooling, meterset, head cooling by water, swept volume of compressor 375m3/h at 1450RPM. Mentioned cooling capacity of 212kW is at an evaporating temperature of -10°C and a condensing temperature +35°C.

Used cool compressor, brand Mycom type N6WB. This in very good maintained condition Mycom cooling compressor is equipped with the following main components: on frame built Mycom 6 cylinders direct drive piston cool compressor, 90 kW FENNER E-motor 400V/460V / 50/60Hz / 985RPM, oil separator, water-cooled oil cooling, meterset, head cooling by water, swept volume of compressor 573m3/h at 1450RPM. Mentioned cooling capacity of 261kW is at an evaporating temperature of -12°C and a condensing temperature +30°C.

Used and in very well condition: open V-belt driven Mycom 8 cylinder cool compressor package, equipped with a Leroy Somer 75kW E-motor. Head cooling by means of water.

Used Mycom/Mayekawa industrial cooling compressor type N4WBH with a few operating hours is equipped with the following main components:

• on frame built direct driven Mycom piston compressors type N4WBH with each 110kW WEG E-motors
• Oil separator
• All necessary pressure certificates

The mentioned cooling capacity of 590kW is at an evaporating temperature of +10°C.