Used air-cooled condenser/CO₂ heater, brand Güntner type S-GVH 065.1C/1-ND.E. This in condition as new air-cooled condenser is equipped with:

• 1 piece ZIEHL-ABEGG ventilator (Ø650,1340/1000RPM, 2,2/1,3kW)
• Stainless steel tubes with a max. working pressure 41bar
• Air flow 14.830 m³/h
• Tube volume 16,7 liter 
• Surface 104,6 m²

Mentioned cooling capacity of 26kW is with the refrigerant CO₂/R744 at condensing temperature of +40°C at an air inlet temp. of +32°C.
Cooling capacity with the refrigerant R404a at condensing temperature of + 41°C at an air inlet temp. of +25°C and ΔT15K is 53kW at high speed.

Used dry cooler, brand Güntner type GFH 052C/2N-3F. This in good condition dry cooler is equipped with:

• 2 pieces ventilators, each Ø520, 50Hz, 0,78/0,55kW, 1340/1000RPM with maintenance switch
• Air flow 16.300 /12.400 m³/h
• Volume 31dm³
• Surface 205 m²

Mentioned cooling capacity of 43kW is with a water/glycol mixture of 34% at an inlet/outlet temp. of +45°C/+40°C at an air inlet temp. of +32°C at high speed. Cooling capacity at low speed is 36kW

Used air-cooled condenser, brand GEA/Küba, type GAV N06-1x2I. This in good condition air-cooled condenser is equipped with the following main components:

• 2 pieces ventilators (each Ø650/2kW/50Hz)
• Air flow 27.340 m³/h
• Noise pressure level 65 dB(A) at 10m
• Surface 291 m²

Mentioned cooling capacity of 109kW is with the refrigerant R404a at condensing temperature of + 40°C at an ambient temperature of +25°C.

Used and in condition as new:dry cooler brand of Searle / Kelvion, type LF-PA202L4-091P000, equipped with 4 pieces ZIEHL- ABEGG EC ventilators, each of 1.95kW, water-resistant control box with electronic temperature controlled ventilator control. Mentioned capacity is with a water/glycol mixture of 33%, inlet temperature of +45°C and an outlet temperature of +40°C with a volume flow rate of 23,1m3/h.

Used air-cooled condenser, brand Cabero type AC/DND107ME/2X4E. This in good condition air-cooled condenser is equipped with the following main components:

• 8 pieces ventilators (each 0,3kW/240RPM/50Hz)
• Electronic ventilator control and control box
• Air flow 81.950 m³/h
• Noise pressure level 34,2 dB(A) at 10m (low noise model)
• Surface 2.106 m²

Mentioned cooling capacity of 248kW is with the refrigerant R134a at condensing temperature of + 44°C at an air inlet/outlet temperature of +37°C/+44,8°C.

Used air-cooled condenser, brand Searle/GEA type MEC234-N604D AL. This in very good condition air-cooled condenser is equipped with:

• 6 pieces Ebm ventilators, each 1320RPM/2,63kW
• Air flow 78.480 m³/h
• Noise pressure level 66dB(A) at 10m
• Coil volume 86 dm³
• Max. operating pressure 27,6 bar

Mentioned cooling capacity of 294kW is with the refrigerant R404a at condensing temp. of + 45°C at an ambient temp. of +30°C.

Used and in good condition (no scale or rust on the coils and the housing): Baltimore evaporating condenser type VXC 97 is equipped with a ventilator motor of 7,5kW and it will be delivered without water pump. If desired, we can deliver this unit with a water pump of 1kW and new water floater. Mentioned capacity is at a wet bulb temperature of +22°C and condensing temperature of +35°C with the refrigerant R717/ammonia.

Used air-cooled condenser, brand Goedhart type FEAL-90M/4-6P. This in very good condition air-cooled condenser is equipped with:

• 4 pieces  ventilators, each Ø900 / 3,6kW/2,5kW/ 890RPM/700RPM
• Air flow 104.890 m³/h
• Surface 924 m²
• Coil volume 96 dm³

Mentioned cooling capacity of 399kW is with the refrigerant R717/ammonia at condensing temp. of + 40°C at an air inlet temp. +25°C at high speed, at low speed 335kW.

Used: as new, air-cooled NH3/ammonia condenser, equipped with Güntner electronic rev speed control, switchbox, TüV certificates. Cooling capacity per condenser is 410 kW at a condensing temperature of 42°C. Note: Condenser can be also converted to a water / glycol application at Comron International and equipped with DN water flanges.

Used Evaporating Condenser, brand Evapco, type LSCB-135. This in very good condition (no scale or rust on the coils and the housing) evaporating condenser is equipped with a water pump of 1.1kW, ventilator of 7.5kW and a water floater. Mentioned capacity of 505kW is at a condensing temperature of +35°C with a wet bulb temperature of +22°C.

Used water-cooled condenser (Q-plate), brand VAHTERUS type PSHE 5 HH-156/1/1. This water-cooled condenser is in very good condition and designed for a cooling capacity of 559kW at a condensing temperature of +35°C with the refrigerant R410A/R717/water at freon inlet/outlet temperature of +62°C/+26,5°C  a water outlet temperature of +15°C and a water inlet temperature of +20.2°C.

Used evaporating condenser, brand Baltimore, type VXC-150R. This in very good condition evaporating condenser (no scale or rust on the coils and housing) is equipped with:

• Ventilator motor of 11 kW (1450RPM)
• Water floater 
• Heating element
• Separate section for oil cooling
• PED certificates

Mentioned cooling capacity of 647 kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

Used dry cooler, brand Güntner, type GFH 102C/2X5L(D). This in very good condition dry cooler is equipped with 10 pieces ventilators, Ø 102mm, airflow of 207.000m3/h, maximum absorbed power per ventilator of 1.2kW, necessary flow regulators. Mentioned capacity of 683kW is at a water/glycol percentage of 34%, at water/glycol inlet temperature of +40°C and an outlet temperature of +35°C at an ambient temperature of +25°C.

Used dry cooler, brand Searle/Kelvion, type DGA263 N812S. This in very good condition dry cooler is equipped with:

• 12 pieces Ebm ventilators, each Ø800 /0,34kW
• Waterproof control box with temperature-controlled fans and relays with thermic safety switch

Mentioned cooling capacity of 726kW is with a water/glycol mixture of 30% at inlet/outlet temp. of +45°C/+35°C at an air inlet temp. of +25,3°C with a pressure drop 64kPa, flow rate 17,3l/s. 
Cooling capacity is with a water/glycol mixture of 30% at inlet/outlet temp. of +45°C/+35°C at an air inlet temp. of +25,3°C with a pressure drop 32kPa, flow rate 8,65l/s and air volume 21m³/s is 340kW.

Used evaporating condenser, brand Baltimore, type CXV-147 R. This, in good condition Baltimore hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:

• Fan motors of 2 x 5,5/1,1kW / 1500/750RPM
• Water floater 
• Heating element

Mentioned cooling capacity is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia. 
Cooling capacity at t a condensing temperature of +32°C and wet bulb temperature of +20°C is 660kW.

Used and in very well maintained condition (no scale on the plastic fill packings): complete GEA/Polacel open cooling tower, complete with heating element and water pump. Serial nr. unit: 10340941203, fan type: 5VPFT8, speed 725 – 1455 RPM, gear-box type EK120.. Mentioned capacity is at water of +32°C in, +26°C out and at +21°C wet bulb temperature. Water volume min. 44m³, max. 221m³.

Used evaporating condenser ,brand Evapco, type ATC-M252-1G. This, in very good condition evaporating condenser (no scale or rust on the coils and housing) is equipped with:

• 1 piece ventilator of 7,5 kW
• Water pump of 2,2 kW
• Water floater 
• Heating element (2x 5kW)

Mentioned cooling capacity is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

Used evaporating condenser, brand Baltimore, type VXC S 328 R. This, in very good condition evaporating condenser (no scale or rust on the coils and housing) is equipped with:

• Ventilator motor of 30 kW
• Water pump of 2,2 kW
• Water floater 
• Heating element
• Separate section for oil cooling
• PED certificates 

Mentioned cooling capacity of 1244kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

Used evaporating condenser, brand Baltimore, type CXVE_244-1012-15L R. This, in condition as new Baltimore hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:

• Ventilator motors of 2 x 5,5kW
• Water pump of 5,5kW
• Water floater 
• Heating element
• PED certificates 

Mentioned cooling capacity of 1245 kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

Used evaporating condenser, brand Baltimore, type CXV 283R. This, in very good condition hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:

• Ventilator motors of 2 x 5,5kW
• PED certificates 
• Water floater and water pump will be delivered separately

Mentioned cooling capacity is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

Used evaporating condenser, brand Baltimore, type CXVE_356-1212-20L. This in condition as new hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:

• Ventilator motors of 2 x 7,5kW
• Water pump of 5,5kW
• Water floater 
• Heating element
• Separate pipe bundle for a closed circuit oil cooling of 350 kW at a water/glycol mixture 39% at liquid inlet/outlet temp. of +42°C/+35°C
• PED certificates 

Mentioned cooling capacity of 1514kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

Used open cooling tower, brand Evapco, type AT-112-112. This in good condition open cooling tower (no scale on the plastic fill packings) is equipped with:

• Stainless steel housing
• Ventilator motor of 15kW

Mentioned cooling capacity of 1575kW is at water range of +32°C/+27°C and a wet bulb temperature of +22°C with 75l/s.

Used open cooling tower, brand Baltimore, type FXT 160R. Mentioned capacity is at a wet bulb temperature of +22°C 95m3/h with a water inlet temperature of +45°C and a water outlet temperature of +30°C. If other capacities are desired, please contact us and we can make the correct capacity calculation for you.

Used evaporating condenser, brand Baltimore, type CXV 396. This, in very good condition Baltimore hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:

• Ventilator motors of 3 x 18,5kW
• Water pump of 5,5kW
• Water floater 
• Heating element

Mentioned cooling capacity is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.

1 piece new pipes coil/block for Baltimore evaporating condensers type CXV 396.

Used water-cooled condenser(plate&shell), only 1 year in operation, explained by the following design conditions: capacity of the condenser at a condensing temperature of +35°C with the refrigerant of R717/ammonia is 2200kW, maximum ammonia inlet temperature of 120°C and outlet temperature of +35°C, water inlet temperature of +26°C and outlet temperature of +33°C at 270m3/h. Material of the exchanger is AISI 316L and the housing is carbon steel. Let us know if you need more information and then we will send you the complete data sheet. Water-cooled condenser will be supplied with all necessary drawings and pressure certificates.