| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| Güntner |
|
GFD 080.1A/2x3-ED1A/6P.E used dry cooler, type of refrigerant: Water/Glycol |
|
166 kW |
|
Used dry cooler, brand Güntner, type GFD 080.1A/2x3-ED1A/6P.E.
This dry cooler, in very good condition, is equipped with:
6 pcs fans, each with an electrical power of 0.16 kW, speed 435 RPM, EC type
Sound power level: 66 dB(A)
Heat exchanger surface: 1,244.8 m²
Tube volume: 172.3 litres
Fins: aluminium with copper tubes
Max. operating pressure: 16 bar
The mentioned cooling capacity of 166 kW is based on a 34% water/glycol mixture with inlet/outlet temperatures of +45°C / +40°C, an air inlet temperature of +32°C and a water flow rate of 30.84 m³/h.
|
|
2015 |
|
More information |
| Güntner |
|
GFH 082B/3-L(D)-F6/8P used dry-cooler, type of refrigerant: Water/Glycol |
|
192 kW |
|
Used and in very good condition: Güntner dry cooler type GFH 082B/3-L(D)-F6-/8P, equipped with:
3 fans, each 0.77 kW
Sound level approx. 55 dB(A), including safety switch
Tube volume: 79 litres
Heat exchanger surface: 644 m²
Airflow: approx. 42.600 m³/h
The mentioned cooling capacity of 192 kW is based on a 34% water/glycol mixture with an entering/leaving temperature of +40°C/+35°C, an ambient temperature of +25°C, and a water flow rate of 33 m³/h.
|
|
2006 |
|
More information |
| Güntner |
|
AGVH 080.2 B3-N(D) used air-cooled condenser, type of refrigerant: NH3 Ammonia |
|
196 kW |
|
Used and in condition as new: air-cooled NH3 ammonia condenser, equipped with 3 ventilators, 880 RPM. Mentioned cooling capacity is at 45°C condensing temperature and ambient temperature of 30°C. Noise pressure level at 10m is 56dB(A).
|
|
2007 |
|
More information |
| Güntner |
|
S-AGVH-090.2a/2-NS / used air-cooled condenser, type of refrigerant: R717/NH3 |
|
215 kW |
|
Used air-cooled condenser, brand Güntner type S-AGVH-090. 2a /2-NS. This in very good condition air-cooled condenser is equipped with:
2 pieces ventilators, each 2,7kW/ 890RPM
Air flow 55.200 m³/h
Pressure certificates
Mentioned cooling capacity of 215kW is with the refrigerant R717/ammonia at condensing temp. of + 40°C an air inlet temp. +25°C ΔT 15K.
|
|
2006 |
|
More information |
| Goedhart |
|
FEAL-90M/4-6P Used Air-cooled Condenser, type of refrigerant: R717/NH3 |
|
399 kW |
|
Used air-cooled condenser, brand Goedhart type FEAL-90M/4-6P. This in very good condition air-cooled condenser is equipped with:
• 4 pieces ventilators, each Ø900 / 3,6kW/2,5kW/ 890RPM/700RPM
• Air flow 104.890 m3/h
• Surface 924 m2
• Coil volume 96 dm3
Mentioned cooling capacity of 399kW is with the refrigerant R717/ammonia at condensing temp. of + 40°C at an air inlet temp. +25°C at high speed, at low speed 335kW.
|
|
2000 |
|
More information |
| GEA/Goedhart |
|
Koal-G-N-4690D-C-6p (D) used air-cooled condenser, type of refrigerant: R507 All Freon |
|
404 kW |
|
Used air-cooled condenser, brand GEA-Goedhart Koal-G-N-4690D-C-6p (D). This in very good condition air-cooled condenser is equipped with:
6 Pieces Sud electric ventilators 740/900 RPM, 1.6/2.4Kw
Coil volume 227.00 Ltr
Max. operating pressure 32 Bar
2 Freon sections
Mentioned cooling capacity of 404kW is with the refrigerant R507 at condensing temp. of + 35°C at an ambient temp. of +25°C.
|
|
2012 |
|
More information |
| Güntner |
|
AGVH-101B/2x5S(D) used air-cooled condenser, type of refrigerant: NH3 Ammonia |
|
410 kW |
|
Used: as new, air-cooled NH3/ammonia condenser, equipped with Güntner electronic rev speed control, switchbox, TüV certificates. Cooling capacity per condenser is 410 kW at a condensing temperature of 42°C. Note: Condenser can be also converted to a water / glycol application at Comron International and equipped with DN water flanges.
|
|
1998 |
|
More information |
| Güntner |
|
GVH 080.3A/2x6-E(D).E used air-cooled condenser, type of refrigerant: Freon/R507A |
|
410 kW |
|
Used and in condition as new, air-cooled Güntner condenser, model GVH 080.3A/2x6-E(D).E, equipped with 12 VTO 1267 ventilators, each 0,25 kW, two junction boxes with work switches. Project nr. Güntner: 441801. Mentioned capacity of 410kW is at +40°C condensing temperature with refrigerant R507A and an ambient temperature of +26°C. This condenser is equipped as low noise 39dB(A).
|
|
2009 |
|
More information |
| Güntner |
|
S-GVH-090-2A/2x5-E(D) used air-cooled condenser, type of refrigerant: R507/All Freon |
|
530 kW |
|
Used Güntner air-cooled condenser, type S-GVH-090-2A/2x5-E(D), equipped with 10 ventilators, diameter 900mm. Mentioned capacity of 530kW is with refrigerant R404A at a condensing temperature of + 40°C and a ΔT of 15°C at an ambient temperature of +25°C.
|
|
2010 |
|
More information |
| Güntner |
|
S.GFH-080-3A/2 x 4 – L(D)F6/3PE used dry cooler, type of refrigerant: Water/Glycol |
|
533 kW |
|
Used dry cooler, brand Güntner S.GFH-080-3A / 2 x 4 – L (D) F6 / 3PE low noise version.
This in very good condition dry cooler , is equipped with:
• 8 pieces of Ziehl ABBGG fans, each 0.8kW at 460V at 60Hz.
• Water-resistant control box with variable speed control for the fans by means of frequency converter and relays with thermal protection
• Dry cooler capacity 270L.
Mentioned cooling capacity of 533kW is with a water/glycol mixture of 34% at an inlet/outlet temp. of +40°C/+35°C with an ambient temperature of +25°C.
Flow of 100m³/h, noise production 57 dB(A).
|
|
2013 |
|
More information |
| Evapco |
|
WDC 228 used evaporative condenser, type of refrigerant: R717/NH³/Ammonia |
|
547 kW |
|
Used evaporative condenser, brand Evapco, type WDC 228. This evaporative condenser is in very good condition (no scale or corrosion on the coil bundle or casing) and is equipped with:
• 1 fan, 4 kW (low-noise version)
• Water pump, 2.2 kW
• Water float valve
• Heating element
• Stainless steel pre-cooling coil (energy-saving design)
• Tube volume approx. 222 litres
• PED certificate (24 bar)
The stated cooling capacity is based on refrigerant R717/ammonia at a condensing temperature of +35°C with a wet-bulb temperature of +22°C.
|
|
2010 |
|
More information |
| Cabero |
|
ACHAD097MB/2x6S-40 D (ZA) EC B used air-cooled condenser, type of refrigerant: R717/NH3 |
|
555 kW |
|
Used air-cooled condenser, brand Cabero ACHAD097MB/2x6S-40 D (ZA) EC B. This air-cooled condenser in very good condition is equipped with:
12 pcs Ziehl - ABEGG fans, each 0.68 / 1.28kW/50-60Hz/400/480V.
Pressure certificates / PED No.13445:2009
Stainless steel pipe bundle with coated aluminum fins.
Surface 2350m²
Listed cooling capacity of about 555kW is with the refrigerant R717/ammonia at a condensing temp. of +40°C air entering temp. of +30°C.
|
|
2018 |
|
More information |
| VAHTERUS |
|
PSHE 5 HH-156/1/1 used water-cooled condenser, type of refrigerant: R410A/R717/Water |
|
559 kW |
|
Used water-cooled condenser (Q-plate), brand VAHTERUS type PSHE 5 HH-156/1/1. This water-cooled condenser is in very good condition and designed for a cooling capacity of 559kW at a condensing temperature of +35°C with the refrigerant R410A/R717/water at freon inlet/outlet temperature of +62°C/+26,5°C a water outlet temperature of +15°C and a water inlet temperature of +20.2°C.
|
|
2005 |
|
More information |
| Thermofin |
|
X-TACH.3-091-25-C-S-DE-BC-02 used Air-cooled condenser, type of refrigerant: R717/NH3 |
|
608 kW |
|
Used air-cooled condenser, brand Thermofin type X-TACH.3-091-25-C-S-DE-BC-02. This in very good condition air-cooled condenser is equipped with:
10 pieces EBMPAPS, 800RPM/Min, 1,58kW.
Pressure certificates / PED
Stainless steel piping bundle with coated aluminum fins.
Surface 2807 m².
Tube volume 269L
Mentioned cooling capacity of 608W is with the refrigerant R717/ammonia at condensing temp. of + 40°C and air inlet temp. of +30°C.
|
|
2012 |
|
More information |
| Evapco |
|
LSCB-185 evaporative condenser, type of refrigerant: R717/NH3/Ammonia |
|
690 kW |
|
Used evaporative condenser, brand Evapco, type LSCB-185. This evaporative condenser in very good condition (no lime or rust on the pipe bundle and plating) is equipped with:
1 piece fan of 7.5 kW
Water pump of 1.5 kW
Water float
Heating element
Cooling capacity quoted is with the refrigerant R717/ammonia at a condensing temperature of +35°C with a wet cool temperature of +22°C.
|
|
2005 |
|
More information |
| Baltimore |
|
VXC-185R used evaporating condenser, type of refrigerant: R717/Ammonia |
|
690 kW |
|
Used evaporating condenser, brand Baltimore, type VXC-185R. This in good condition evaporating condenser is equipped with:
• Ventilator motor of 11kW (1450RPM)
• Water pump (separately)
• Water floater
• Heating element
• PED certificates
Mentioned cooling capacity of 690 kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.
|
|
2002 |
|
More information |
| Gohl |
|
DT 2/82 Z used cooling tower, type of refrigerant: Water |
|
700 kW |
|
Used and in very good condition: Gohl open cooling tower, model DT 2/82 Z, equipped with 30 kW ventilator, water floater, heating element and switch-board with frequency control for the ventilator, temperature controlled. Mentioned capacity is at a water inlet temperature of +29°C in and +24°C outlet temperature, a wet bulb temperature of+22°C and water amount of 125 m³/h.
|
|
2003/2010 |
|
More information |
| Baltimore |
|
VXC-205 used evaporating condenser, type of refrigerant: R717/Ammonia |
|
764 kW |
|
Used evaporating condenser, brand Baltimore, type VXC-205. This in good condition evaporating condenser (no rust or lime on the piping bundles) is equipped with:
• Ventilator motor of 18,5kW.
• Water pump 1,5kW.
• Water floater.
• Heating element.
• PED certificates.
Mentioned cooling capacity of 764 kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.
|
|
2016 |
|
More information |
| Baltimore |
|
CXV-147 R used evaporating condenser, type of refrigerant: R717/Ammonia |
|
780 kW |
|
Used evaporating condenser, brand Baltimore, type CXV-147 R. This, in good condition Baltimore hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:
• Fan motors of 2 x 5,5/1,1kW / 1500/750RPM
• Water floater
• Heating element
Mentioned cooling capacity is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.
Cooling capacity at t a condensing temperature of +32°C and wet bulb temperature of +20°C is 660kW.
|
|
1998 |
|
More information |
| Goedhart |
|
L41090D-C-8p used air-cooled condenser, type of refrigerant: NH³/Freon |
|
819 kW |
|
Used air-cooled condenser, brand Goedhart, type L41090D-C-8p. This condenser, which is in good condition, is equipped with:
10 fans, each Ø900 mm / 2,1 kW / 687 RPM / 580 RPM
Air flow rate: 219,184 m³/h (high speed) or 171,238 m³/h (low speed)
Heat exchange surface: 2,180 m²
Number of cooling circuits: 2
Tube bundle volume: 366 litres
Tube material: stainless steel
The mentioned cooling capacity of 819 kW is based on refrigerant R717 (ammonia) at a condensing temperature of +40°C and an air inlet temperature of +25°C at high speed; at low speed the capacity is 689 kW.
|
|
2008 |
|
More information |
| Evapco |
|
ATC-M223E-1G used evaporative condenser, type of refrigerant: R717/NH3/Ammonia |
|
872 kW |
|
Used evaporative condenser, brand Evapco, type ATC-M233-1G. This evaporative condenser in very good condition (no lime or rust on the pipe bundle and plating) is equipped with:
1 piece fan of 7.5 kW
Water pump of 2.2 kW
Water float
Heating element (2x 5kW)
PED Certificate
Cooling capacity listed is with the refrigerant R717/ammonia at a condensing temperature of +35°C with a wet bulb temperature of +22°C.
|
|
2011 |
|
More information |
| Refrion |
|
ESNC 2710.6/2D used dry cooler, type of refrigerant: Water/Glycol |
|
921 kW |
|
Used dry cooler, brand Refrion type ESNC2710.6/2D. This dry cooler in very good condition is equipped with:
• 14 pieces of fans type EC.
• Water-resistant control cabinet with controller for the electronic speed control EC fans.
• In V-arrangement copper/ aluminium heat exchangers.
Mentioned capacity of 921kW is with 79m³/H a water flow at inlet/outlet temp. of +28°C/+18°C at an ambient temperature of +16
|
|
2012 |
|
More information |
| Güntner |
|
GVH 080.3A/2x6-N(S)E used air-cooled condenser, type of refrigerant: All Freon |
|
978 kW |
|
Used and in a very good condition: Güntner air-cooled condenser type GVH 080.3A/2x6-N(S)E is equipped with 12 pieces ventilators each 1.7kW, noise emission is 58dB(A) with maintenance switch. Mentioned capacity is at a condensing temperature of + 40°C with refrigerant R404A and a ΔT of 15°C at full speed, capacity at low speed is 801kW.
|
|
2011 |
|
More information |
| Baltimore |
|
CXVE_244-1012-15L R used evaporating condenser, type of refrigerant: R717/Ammonia |
|
1245 kW |
|
Used evaporating condenser, brand Baltimore, type CXVE_244-1012-15L R. This, in condition as new Baltimore hybrid evaporating condenser (no scale or rust on the coils, housing and plastic packages) is equipped with:
• Ventilator motors of 2 x 5,5kW
• Water pump of 5,5kW
• Water floater
• Heating element
• PED certificates
Mentioned cooling capacity of 1245 kW is at a condensing temperature of +35°C and wet bulb temperature of +22°C with the refrigerant R717/ammonia.
|
|
2014 |
|
More information |
| Evapco |
|
PMC-369E new evaporative condensor, type of refrigerant: R717/NH3/Ammonia |
|
1377 kW |
|
New evaporative condenser, brand Evapco, type PMC-369E. This new evaporative condenser is equipped with:
2 fans, each 5.5 kW
Water pump of 4 kW with low-water protection
Electronic water level float
Heating element: 8 kW with low-water protection
Shipping weight/dimensions:
Basin section: 4,013 x 2,997 x 1,955 mm – 1,986 kg
Upper sections, each: 4,114 x 2,997 x 2,006 mm – 3,728 kg
PED certificate
Available directly from stock
The mentioned cooling capacity is based on refrigerant R717 (ammonia) at a condensing temperature of +35°C and a wet-bulb temperature of +22°C.
Electrical supply: 3x 400/460 V 50/60 Hz.
|
|
Nieuw / New / Neu |
|
More information |
| Baltimore |
|
CXV-309 used evaporating condenser, type of refrigerant: R717/Ammonia |
|
1505 kW |
|
Used evaporating condenser, brand Baltimore, type CXV-309
This Baltimore hybrid evaporating condenser, in excellent condition (no scale or corrosion on the tube bundle, casing, or plastic fill packs), is equipped with:
• Fan motors of 2 x 9 kW
• Water pump of 4 kW
• Water float valve
• Electric heating element
• PED certification
• Two separate circuits: one for ammonia (R717) and one for water/glycol oil cooling with a capacity of 145 kW
The specified cooling capacity of 1505 kW is based on refrigerant R717/ammonia at a condensing temperature of +35°C and a wet bulb temperature of +22°C.
|
|
2010 |
|
More information |
| Baltimore |
|
FXT 160R used open cooling tower, type of refrigerant: Water/ H2O |
|
1663 kW |
|
Used open cooling tower, brand Baltimore, type FXT 160R. Mentioned capacity is at a wet bulb temperature of +22°C 95m3/h with a water inlet temperature of +45°C and a water outlet temperature of +30°C. If other capacities are desired, please contact us and we can make the correct capacity calculation for you.
|
|
2009 |
|
More information |
| Evapco |
|
ATC-892E-1G used evaporative condensor, type of refrigerant: R717/Ammonia |
|
1700 kW |
|
Used evaporative condenser, brand Evapco, type ATC-892E-1G.
This evaporative condenser, in fair working condition, is equipped with:
Fan of 37 kW
Water pump of 5.5 kW
Water float valve
The mentioned cooling capacity applies at a condensing temperature of +37 °C and a wet-bulb temperature of +28 °C, using refrigerant R717 (ammonia).
The cooling capacity at a condensing temperature of +35 °C and a wet-bulb temperature of +22 °C is 3,488 kW.
|
|
2013 |
|
More information |
| Baltimore |
|
CXVE 601-1218-60L used evaporating condenser, type of refrigerant: R717/Ammonia |
|
3066 kW |
|
Used evaporative condenser, brand Baltimore, type CXVE 601-1218-60L. This Baltimore hybrid evaporative condenser, in near-new condition (no limescale or corrosion on the casing or plastic fill packs), is supplied with a new galvanized coil bundle and is equipped with:
Fan motors: 3 × 15 kW
Water pump: 7.5 kW
Float valve
Heating element
PED certificates
Serial numbers: H150747301 & H150747303
The mentioned cooling capacity is based on refrigerant R717/ammonia at a condensing temperature of +35°C and a wet bulb temperature of +22°C.
|
|
2016 |
|
More information |
| Baltimore |
|
S3865 used cooling tower, type of refrigerant: Water |
|
5726.4 kW |
|
Used cooling tower, brand Baltimore, type S3865. This unit is in good condition (no limescale on the plastic fill media and no rust on the internal framework) and is equipped with:
• 1 pc fan with Dahlander motor, 18.5/4.62 kW, 1,800/700 RPM, 3~ 380 V, 50 Hz
• Serial number: 99109001 W
The stated cooling capacity of 5,726.4 kW was measured at water temperatures of 34.4°C inlet and 26.6°C outlet, with 2 × 87.4 L/s flow, at a wet-bulb temperature of +22°C.
|
|
1999 |
|
More information |
| Evapco |
|
PMC-1556E new evaporative condensor, type of refrigerant: R717/Ammonia |
|
5809 kW |
|
New evaporative condenser, brand Evapco, type PMC-1556E. This new evaporative condenser is equipped with:
6 fans, each 11 kW
2 pieces of water pumps with pump heaters, each 5.5 kW, including low-water protection
Electronic water level float
Heating elements: 2 units of 12 kW each, including low-water protection
Shipping weight/dimensions:
Basin section (LxWxH): 11811 x 2997 x 2717 mm – 5723 kg
Two upper sections, each: 5743 x 2997 x 1778 mm – 9593 kg
PED certificates
Available directly from stock
The mentioned cooling capacity is based on refrigerant R717 (ammonia) at a condensing temperature of +35°C and a wet-bulb temperature of +22°C.
Electrical supply: 3 x 400/460V / 50/60 Hz.
|
|
Nieuw / New / Neu |
|
More information |