Used screw compressor, brand Trane type CHHB100DNK0N120A. This cooling compressor in very good condition with specification as: 

• Flow rate 343 m³/h on 2900RPM
• Max. pressure 32bar

Used complete condensing unit brand Danfoss type OP-MPZC136MTP00E. This in mint condition complete condensing unit is equipped with:

• 1 piece Maneurop reciprocating compressor type MTZ080
• 1 piece fan, Ø609
• Volume condenser coil 5,2l
• Airflow condenser coil 5.100m³/h
• Liquid receiver of 7-7.6l
• All necessary safety devices
• Sound pressure 45 dB(A) op 10m
• 1 piece Güntner cooling-/freezing evaporator type DHF 035B/44 L1-A 

Mentioned cooling capacity of 10,5kW is with the refrigerant R404a at -10°C/+42°C at an ambient temperature +32°C.

Used and in good condition: complete Bitzer condensing unit type Frigotronic 4 P.2, equipped with all protection, condenser, liquid tank, Bitzer open driven 4 cylinder compressor type 4 P.2, E-motor 11 kW, switchboard cabinet. Mentioned cooling capacity is at an evaporating temperature of -30°C with the refrigerant R507, capacity at-10°C evaporating is 31 kW.

Used cooling/freezing tank aggregate, brand Bitzer, type 6J-22.2Y-40P is equipped with the following main components:

• Liquid tank
• Oil separator
• Manometer set with all necessary safety devices
• Liquid filter dryer/sight glass
• Switchbox

Mentioned cooling capacity of 21,8kW is with the refrigerant R507 at -30°C /+40°C.
Cooling capacity at -10°C /+40°C is 54kW. 

Used and in good condition: Bitzer two stage tank aggregate (very suitable for low temperature application), equipped with liquid tank, liquid separator, oil separator, closed intermediate cooler, meterset, all necessary protection. Mentioned cooling capacity is at an evaporating temperature of -35°C/+40°C with the refrigerant R507.

Used: Grasso screw package. This Grasso screw package is in very well maintained condition and equipped with a Schorch 22kW E-motor, horizontal oil separator, oil pump, water-cooled oil cooler shell & tube type, eco connection, switch-board with Unisab II controller, serial number unit 7886. Screw package will be delivered with all necessary PED certificates. Mentioned cooling capacity is with the refrigerant R717 at -40°/+35°C, absorbed power approx. 31kW.

Used and in good condition freeze compressor: brand Dorin, type K5000CS-00 is equipped with 6 cylinders in V shape. Mentioned cooling capacity is at -10°/+35°C with refrigerant R404A.

Used Bitzer freezing screw package. This in very good condition freezing screw package is equipped with:

• on frame built open Bitzer screw compressor type OSNA-7471-K connected to a Leroy-Somer 75kW E-motor
• Oil separator
• Air-cooled oil cooler
• Eco with closed between cooler for liquid subcooling
• Liquid separator on the suction side of the compressor
• All required safety devices
• Gauge

Mentioned cooling capacity is at an evaporating temperature of -40° C and a condensation temperature of +40° C with the refrigerant R507.

Used scroll compressor, brand Bitzer, type GSD80485VA. Mentioned cooling capacity of 102kW is at 0°C/ +40°C with the refrigerant R410A.

Used and in good condition: complete Bitzer screw package consisting of built on frame liquid tank, oil separator, water cooled oil cooler, eco with plate intercooler for liquid undercooling (year 1993) and two young Bitzer screw compressors type HSN 7461-70, serial nr. 1071100881 and 10073001971, year 2005, manometer set with all safety devices. Mentioned cooling capacity is at-40°/+35°C with refrigerant R507.

Used and in good maintained condition: complete Grasso direct drive 8 cylinder piston package, consisting of a 55 kW Schorch E-Motor, year 2004, oil separator, all security devices. Mentioned cooling capacity is at -10°C/+40°C.

Used and in very good condition, AC compressor type Z-50-154.Y 6 cylinder. Mentioned cooling capacity is at an evaporating temperature of -0° evaporating temperature of -30°C = 7,3kW.

Used Bitzer piston package. This in very good condition piston package is equipped with :

• 1 piece Bitzer piston compressor type 6H-35.2Y (frequency controlled at 60Hz)
• 1 piece Bitzer piston compressor type 4G-20.2Y
• Oil separator
• Vertical liquid tank
• Oil tank 
• High/low pressure gauges with all necessary safety devices
• Control cabinet with frequency controller brand Danfoss

Mentioned cooling capacity of 112kW is with R404a at -8°C/+45°C.

Used and in good condition: open V-belt driven Mycom 6-cylinder cooling compressor, equipped with Leroy Somer 45kW E-motor (V-belt drive), meter set, high/low oil pressure safety devices, head cooling. Mentioned cooling capacity is at -5°C evaporating temperature and +30°C condensing temperature.