| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| York |
|
JL833-HS5046 used piston compressor, type koudemiddel: R407C/All Freon |
|
kW |
|
Used piston compressor, brand York type JL833-HS5046 / JL833-HS5046LSD. This is in very good condition and equipped with 8 cylinders.
|
|
1999 |
|
More information |
| Daikin |
|
ZHC7SLFYE used screw compressor, type koudemiddel: R407C |
|
kW |
|
Used and in very good condition Daikin ZHC7SLFYE screw compressor.
|
|
2001 |
|
More information |
| Trane |
|
CHHB100DNK0N120A used cooling compressor, type of refrigerant: All Freon |
|
kW |
|
Used screw compressor, brand Trane type CHHB100DNK0N120A. This cooling compressor in very good condition with specification as:
• Flow rate 343 m3/h on 2900RPM
• Max. pressure 32bar
|
|
2000 |
|
More information |
| Bitzer |
|
4N used tank aggregate, type of refrigerant: All/Freon |
|
6 kW |
|
Used and in good condition, Bitzer open driven tank aggregate, consisting of V-belt driven 4N Bitzer compressor, rotor 11kW E-motor, oil separator, manometer set.
|
|
1990 |
|
More information |
| l’Unite |
|
TAGP 45532 used condensing unit, type of refrigerant: R507/R404A |
|
10 kW |
|
Used and in very good condition: complete l’Unite /Smeva condensing unit equipped with rain resistant housing, switch board, electronic condenser pressure control, filter/sightglass. Mentioned cooling capacity is at an evaporating temperature of 0°C with refrigerant R404A.
|
|
2005 |
|
More information |
| Danfoss |
|
OP-MPZC136MTP00E used condensing unit, type of refrigerant: R404A/All Freon |
|
10.5 kW |
|
Used complete condensing unit brand Danfoss type OP-MPZC136MTP00E. This in mint condition complete condensing unit is equipped with:
• 1 piece Maneurop reciprocating compressor type MTZ080
• 1 piece fan, Ø609
• Volume condenser coil 5,2l
• Airflow condenser coil 5.100m3/h
• Liquid receiver of 7-7.6l
• All necessary safety devices
• Sound pressure 45 dB(A) op 10m
• 1 piece Güntner cooling-/freezing evaporator type DHF 035B/44 L1-A
Mentioned cooling capacity of 10,5kW is with the refrigerant R404a at -10°C/+42°C at an ambient temperature +32°C.
|
|
2011 |
|
More information |
| Bitzer |
|
4 P.Z used condensing unit, type of refrigerant: R507/All Freon |
|
13 kW |
|
Used and in good condition: complete Bitzer condensing unit type Frigotronic 4 P.2, equipped with all protection, condenser, liquid tank, Bitzer open driven 4 cylinder compressor type 4 P.2, E-motor 11 kW, switchboard cabinet. Mentioned cooling capacity is at an evaporating temperature of -30°C with the refrigerant R507, capacity at-10°C evaporating is 31 kW.
|
|
2001 |
|
More information |
| DWM/Copeland |
|
D3D A5-75X-AWM/3 used condensing unit, type of refrigerant: R507/All |
|
19 kW |
|
Used and in good condition, complete DWM/Copeland condensing unit, completed with an 3 cylinder semi-hermetic cool/freeze compressor, oil separator, liquid tank (62ltr), liquid separator for the suction of the compressors, securities. Mentioned cooling capacity is at an evaporating temperature of -10°, cooling capacity at an evaporating temperature of -30°C = 7,3kW.
|
|
2004 |
|
More information |
| Bitzer |
|
6J-22.2Y-40P used tank aggregate, type of refrigerant: R507 |
|
21.8 kW |
|
Used cooling/freezing tank aggregate, brand Bitzer, type 6J-22.2Y-40P is equipped with the following main components:
• Liquid tank
• Oil separator
• Manometer set with all necessary safety devices
• Liquid filter dryer/sight glass
• Switchbox
Mentioned cooling capacity of 21,8kW is with the refrigerant R507 at -30°C /+40°C.
Cooling capacity at -10°C /+40°C is 54kW.
|
|
2007 |
|
More information |
| Bitzer |
|
4T.2 used cool/freeze compressor, type of refrigerant: All Freon |
|
22 kW |
|
Used and in very good condition: complete Bitzer open driven cool/freeze compressor installation, consisting of the following main components: 2 pieces open driven Bitzer 4 T.2 compressors, oil reservoir, oil floaters on the carters, low/high/oil pressure pressostates, Leroy-Somer 11 kW E-motor. Mentioned cooling capacity is with the refrigerant R404A at an evaporating temperature of -30°C. Cooling capacity at -10°C evaporating is 114 kW.
|
|
1998 |
|
More information |
| Bitzer |
|
42-8.2Y-40P used tank generator, type of refrigerant: R507/All |
|
23 kW |
|
Used and in very good condition, Bitzer 42-8.2Y-40P cool/freeze tank generator. Mentioned cooling capacity is at an evaporating temperature of -10°, cooling capacity at an evaporating temperature of -30°C = 9kW
|
|
2008 |
|
More information |
| Carrier |
|
4x 06VR-514C used freeze compressor, type of refrigerant: R404A/R507 |
|
23 kW |
|
Used and in condition as new: complete Carrier central freeze unit, consisting of: 4 pieces Carrier 06VR-514C semi-hermetic freeze compressor with head ventilators (head cooling), central suction manifold with suction filter, oil separator, oil buffer tank with sight glasses, oil floaters. Mentioned cooling capacity is at an evaporating temperature of -30°C and +40°C condensing.
|
|
2006 |
|
More information |
| DWM/Copeland |
|
D6DT3-300X-AWM/D used cooling / freezing compressor, type of refrigerant: All Freon |
|
25 kW |
|
Used and in good condition: complete DWM/Copeland tank aggregate, equipped with 6 cylinder Discus cool-/freeze compressor, liquid tank, liquid separator, protection set, filter sight glass, head ventilator.
|
|
1998 |
|
More information |
| DWM/Copeland |
|
D6DT-300X used freeze compressor, type of refrigerant: R404A/R507 |
|
25 kW |
|
Used and in good maintained condition: complete DWM / Compeland tank aggregate, equipped with 6 cylinder Discus cool-/freeze compressor, liquid tank with filter dryer/sight glass, liquid separator, all necessary safety devices, manometer set.
|
|
1998 |
|
More information |
| Bitzer |
|
4P 10.2Y-40P used condensing unit, type of refrigerant: R507/All Freon |
|
27 kW |
|
Used and in good condition, complete Bitzer condensing unit, completed with all securities, liquid tank (30ltr) air cooled condenser 4P-10-2Y-10P 4 cylinder semi-hermetic Bitzer cool/freeze compressor. Mentioned cooling capacity is at an evaporating temperature of -10°, cooling capacity by an evaporating temperature of -30°C = 10,6kW
|
|
1996 |
|
More information |
| Bitzer |
|
S6F-30.2Y used tank aggregate, type of refrigerant: R507/404A |
|
33 kW |
|
Used and in good condition: Bitzer two stage tank aggregate (very suitable for low temperature application), equipped with liquid tank, liquid separator, oil separator, closed intermediate cooler, meterset, all necessary protection. Mentioned cooling capacity is at an evaporating temperature of -35°C/+40°C with the refrigerant R507.
|
|
1995 |
|
More information |
| Bitzer |
|
6F-40.2Y used cool/freeze compressor, type of refrigerant: R507A/All Freon |
|
34.3 kW |
|
Used and in good condition Bitzer 6F-40.2Y semi-hermetic cool/ freeze compressor. Mentioned cooling capacity is at -30°/+40°C with refrigerant R507A.
|
|
2000 |
|
More information |
| Grasso |
|
DA-6(A) A used screw package, type of refrigerant: R717/Ammonia |
|
37 kW |
|
Used: Grasso screw package. This Grasso screw package is in very well maintained condition and equipped with a Schorch 22kW E-motor, horizontal oil separator, oil pump, water-cooled oil cooler shell & tube type, eco connection, switch-board with Unisab II controller, serial number unit 7886. Screw package will be delivered with all necessary PED certificates. Mentioned cooling capacity is with the refrigerant R717 at -40°/+35°C, absorbed power approx. 31kW.
|
|
2000 |
|
More information |
| Bitzer |
|
4J 22-2Y-40P used cooling/freeze unit, type of refrigerant: R507 |
|
38 kW |
|
Used and in good condition, complete Bitzer cooling/freeze unit, consisting of two semi-hermetic cooling/freeze compressors type 4J 22-2Y-40P of which 1 of year 2006, central manifold suction pipe, meter set with all safety devices. Mentioned cooling capacity is at -25°/+40°C, at -10°/+40°C the cooling capacity is 60kW.
|
|
1998/2006 |
|
More information |
| DWM/Copeland |
|
EVSND230R used compressor tank aggregate, type of refrigerant: R507 |
|
41 kW |
|
Used and in very good condition: DWM/Copeland compressor tank aggregate, built in nice housing, equipped with the following main components: 2x semi-hermetic DWM/Copeland D4DJ5-300X-AWMK 4 cylinder piston compressor, liquid tank, liquid filter dryer/sight glass, switch-board with all necessary controls. Mentioned cooling capacity is at -30°/+45°C with refrigerant R507. At an evaporating temperature of -10°C this is 102kW.
|
|
2007 |
|
More information |
| DWM/Copeland |
|
D33DA-1500-AWY used tandem tankaggregaat, type of refrigerant: R22/R507 |
|
42 kW |
|
Used and in good condition, complete DWM/Copeland tandem tank generator, completed with 2 discus D3D A4-750 semi-hermetic cool/freeze piston compressors, central oil separator, manometer set, securities. Mentioned cooling capacity is at an evaporating temperature of -0°, cooling capacity at an evaporating temperature of -10°C = 34kW.
|
|
1996 |
|
More information |
| Bitzer |
|
4J 13.2Y used cooling/freeze unit, type of refrigerant: R507 |
|
43 kW |
|
Used and in good condition, complete Bitzer cooling/freeze unit, consisting of three semi-hermetic freeze compressors type 4J 13.2Y, 2 of year 1990 and 1 of year 2000, central suction manifold, head cooling for the compressors. Mentioned cooling capacity is at -30° evaporating temperature and +40°C condensing temperature.
|
|
1990/2000 |
|
More information |
| Bitzer |
|
HSK 7051-50 used screw compressor, type of refrigerant: R507A/R404A/R22 |
|
43 kW |
|
Used booster semi-hermetic screw compressor, brand Bitzer, type HSK 7051-50. Mentioned cooling capacity van 43kW is at -41°C/ -7°C.
|
|
2004 |
|
More information |
| Dorin |
|
K5000CS-00 used freeze compressor, type of refrigerant: R404A/R507 |
|
43.9 kW |
|
Used and in good condition freeze compressor: brand Dorin, type K5000CS-00 is equipped with 6 cylinders in V shape. Mentioned cooling capacity is at -10°/+35°C with refrigerant R404A.
|
|
|
|
More information |
| DWM/Copeland |
|
D4DJ-3000-EWM used cool-/freeze compressor, type of refrigerant: R22/All Freon |
|
46 kW |
|
Used cool-/freeze compressor, brand DWM/Copeland type D4DJ-3000-EWM. Mentioned cooling capacity is at an evaporating temperature of -10°C and a condensing temperature +40°C.
|
|
1990 |
|
More information |
| Bitzer |
|
used cooling/freeze unit |
|
46 kW |
|
In very good condition and well maintained: a complete used Bitzer storage/freeze installation, equipped with the following components: 2x Bitzer 6J-22.2Y 6 cylinder compressors built on a central frame witch each 1 oil separator and liquid receiver, 1 air-cooled Profroid condenser type C7AH-4MD4-16PSL, and 1 switch-box. (see also under: Complete installations)
|
|
2006 |
|
More information |
| Bock |
|
AM4-466-8 used semi- hermetic Compressor, type of refrigerant:R407C/R507A |
|
50 kW |
|
In good condition: complete cooling installation consisting of one central compressor unit equipped with one semi-hermetic Bock AM4-466-8 compressor and one Bock AM5-601-4 compressor. The system is delivered with an oil return system, liquid tank, oil separator, 1x vertical Thermokey condenser type CHN 1363 BV, 2x S65 Interco evaporators with electric defrost (each 25kW by 8k) and a switchboard complete with relay switches. Cooling capacity is ± 50kW at -10C/+40°C.
|
|
1995 |
|
More information |
| Bitzer |
|
4P-15.2Y-40P / 6J-33.2Y-40P used cool/ freeze compressor/aggregate, type of refrigerant: R507/All Freon |
|
50 kW |
|
Used cool/ freeze compressor/aggregate: brand of Bitzer. This in very good condition aggregate is equipped with 2 pieces 4 cylinder 4P-15.2Y-40P and 1 piece 6cylinder 6J-33.2Y-40P compressors, oil separator, oil storage tank, oil floaters on the compressors, central suction manifold with suction filter, vertical liquid tank 145ltr (separate), manometer set with low/high pressure switches, oil pressure switch. Mentioned cooling capacity is at an evaporating temperature of -30°C with refrigerant R507. Cooling capacity is 124kW at an evaporating temperature of -10°C with an absorbed power of 36kW. Please note that both units can be delivered with complete switch-board for an additional price.
|
|
2004 |
|
More information |
| Sabroe |
|
CMO 24 used piston package, type of refrigerant: R717/Ammonia |
|
53 kW |
|
Used and in very well maintained: complete YORK CMO 24 piston package, equipped with Leroy Somer E-motor 13,5 kW 1450 RPM, oil separator, unisab II controller. Identification No. 504252, Max. 1800 RPM, swept volume 116 m³/h. Mentioned capacity by -10℃ evaporation temperature and +35℃ condensation temperature with refrigerant ammonia.
|
|
2006 |
|
More information |
| Grasso |
|
4-2-10 used piston package, type of refrigerant: NH3/R717 |
|
55 kW |
|
Used and in good condition: complete Grasso direct driven 4-2-10 2 stage low temperature piston package, consisting of the following main components: Schorch 55 kW E-motor, 1465 RPM, Grasso/Gea controller, oil separator with heating, closed intercooler with injection, capacity control.
|
|
2001 |
|
More information |
| Bitzer |
|
used condensing unit, type of refrigerant: R507 |
|
56 kW |
|
Used and in very well condition: a complete Bitzer cool/freeze installation to cool a big cool or freeze room. This installation consists of the following main components: Bitzer tankaggregate with two semi-hermetic Bitzer 6F-40.2Y piston compressors, switch-board, separate air-cooled condenser brand LTD Model DDD4 serial nr. 12157 with 4 fans. Mentioned cooling capacity is at -30°C evaporating and +40° C condensing temperature. Capacity at -10°C evaporating temperature is 155kW.
|
|
2000 |
|
More information |
| Bitzer |
|
66J-44.2Y-40P used tandem unit/aggregate, type of refrigerant: R134A/R507 |
|
60 kW |
|
Used, and in very good condition: Bitzer tandem unit/aggregate for cooling/freeze application, equipped with 2X Bitzer 6J-22.2Y-40P compressors, capacity control, oil pressure safety devices. Mentioned cooling capacity is with refrigerant R134a at -10°C evaporating and +40°C condensing temperature.
|
|
2006 |
|
More information |
| Bitzer |
|
6H-35.2Y used compressor, type of refrigerant: R507/All Freon |
|
60 kW |
|
Used and in very good condition: Bitzer 6H-35.2Y compressor. Mentioned cooling capacity is at an evaporating temperature van -10°C with refrigerant R507, at an evaporating temperature of -30°C the capacity is approx. 23kW. Serial nr. compressor: 167081157.
|
|
2004 |
|
More information |
| Bitzer |
|
CRYOKIT OSN-7471-K used screw package, type of refrigerant: R507/All Freon |
|
60 kW |
|
Used Bitzer freezing screw package. This in very good condition freezing screw package is equipped with:
• on frame built open Bitzer screw compressor type OSNA-7471-K connected to a Leroy-Somer 75kW E-motor
• Oil separator
• Air-cooled oil cooler
• Eco with closed between cooler for liquid subcooling
• Liquid separator on the suction side of the compressor
• All required safety devices
• Gauge
Mentioned cooling capacity is at an evaporating temperature of -40° C and a condensation temperature of +40° C with the refrigerant R507.
|
|
2000 |
|
More information |
| DWM/Copeland |
|
D6DJ3-300X-AWM/D used AC compressor, type of refrigerant: R134A |
|
63 kW |
|
Used and in good condition: DWM / Copeland AC compressor type D6DJ3-300X-AWM/D.
|
|
1995 |
|
More information |
| DWM/Copeland |
|
FVCNS220R used compressor tank aggregate, type of refrigerant: R407C |
|
64 kW |
|
Used and in very good condition: DWM/Copeland compressor tank aggregate, built in nice housing, equipped with the following main components: 2x scroll ZR 250 KCE-TWD-523 compressors, liquid tank, liquid filter/dryer, sight glass, switch-board with all necessary controls. Mentioned cooling capacity is at -10°/+40°C with refrigerant R407C.
|
|
2009 |
|
More information |
| Grasso |
|
R.C 4-6 used piston package, type of refrigerant: R717/All Freon |
|
69 kW |
|
Used and in very good maintained condition: complete Grasso V-belt driven 4 cylinder piston package, consisting of a 37 kW E-Motor Leroy Somer, oil separator, all security devices. Mentioned cooling capacity is at -10°C/+40°C.
|
|
1994 |
|
More information |
| Carrier |
|
06 EF 275.610 AE used AC compressor, type of refrigerant: R407C |
|
77 kW |
|
Used and in very good condition: 6 zylinder Carrier AC compressor. Mentioned capacity is at 0°C evaporating.
|
|
1996 |
|
More information |
| Bitzer |
|
UMC 3x150MTS used cooling/freeze unit, type of refrigerant: R507 |
|
81 kW |
|
Used and in very good condition: Bitzer central cooling/freeze unit consisting of 3 pieces semi-hermetic Bitzer compressors type 4PC-15.2Y-40P, oil separator, oil buffer tank, electronic oil floaters, liquid tank 200 Ltr. Alfa Laval, switch-board with frequency controller for the compressors. Mentioned cooling capacity is with refrigerant R507at -10°C evaporating temperature, at -30°/+40°C this is ± 21kW.
|
|
2004 |
|
More information |
| Grasso |
|
H-61 used freeze screw package, type of refrigerant: R717/Ammonia |
|
85 kW |
|
Used and in very good condition and well maintened: complete Grasso/GEA freeze screw package, performed with a 37 kW Schorch E-motor, vertical oilseparator, water-cooled oilcooler type plate heatexchanger, eco connection, Grasso controller. Grasso screw package is supplied with the necessary Tüv-certificates. Mentioned cooling capacity of 85 kW is at an evaporating temperature of -40 °C and +35 °C condensing temperature with eco, refrigerant ammonia. If required we can provide this refrigerator/freezer compressor with a larger E-motor.
|
|
1997 |
|
More information |
| Bitzer |
|
HSM 6251-50 used screw compressor, type of refrigerant: R507A/R404A/R22 |
|
85 kW |
|
Used high pressure semi-hermetic screw compressor, brand Bitzer, type HSM 6251-50. Mentioned cooling capacity van 85kW is at -7°C/ +45°C.
|
|
2004 |
|
More information |
| Carrier |
|
used cooling/freeze unit, type of refrigerant: R404A/R507 |
|
86 kW |
|
Used and in very good condition: Carrier cooling/freeze unit, equipped with three Carrier 06 VR 831 E semi-hermetic compressors (10HP each), central suction manifold, oil separator, small oil buffer tank, oil floaters, liquid tank 98 Ltr. Mentioned cooling capacity is at -10°C evaporating and 40°C condensing temperature. Freeze capacity at -30°C evaporating temperature is 27kW
|
|
2000 |
|
More information |
| DWM/Copeland |
|
D6SH1-3500-AWM/D used cool-/freeze compressor, type of refrigerant: R404/All Freon |
|
90.8 kW |
|
Used cool-/freeze compressor, brand DWM/Copeland type D6SH1-3500-AWM/D. Mentioned cooling capacity is at an evaporating temperature of -0°C and a condensing temperature +40°C with refrigerant R404A. Cooling capacity at -10°C/+40°C is 63kW, at -30°C/+40°C is 26kW.
|
|
1997/87 |
|
More information |
| Bitzer |
|
4G-20.2Y-40P used cool / freeze unit, type of refrigerant: R507/All Freon |
|
92 kW |
|
Used and in new condition: complete Bitzer / Carrier cool / freeze unit, consisting of 4 semi-hermetic freeze compressors type 4G-20.2Y-40P electronic oil floaters, oil separator, central suction manifold, switch-board with complete control system. Mentioned cooling capacity is at an evaporating temperature of -30°C and a condensing temperature of +40°C with refrigerant R404A/507. Cooling capacity is 42kW at an evaporating temperature of -40°C and a condensing temperature of +40°C.
|
|
2010 |
|
More information |
| DWM/Copeland |
|
D8SH1-500X-BWM/D used AC compressor, type of refrigerant: R407C |
|
100 kW |
|
Used and in very good condition: DWM / Copeland AC compressor type D8SH1-500X-BWM/D.
|
|
2002 |
|
More information |
| Grasso |
|
RC 4-9 used piston compressor package, type of refrigerant: NH3/R717 |
|
100 kW |
|
Used and in good condition: complete Grasso/GEA RC 4-9 direct driven piston compressor package, consisting of the following main components: Schorch 37kW E-motor 975RPM, Grasso/GEA controller, oil separator, switch-board with star/delta switch. Mentioned cooling capacity is with refrigerant R717 ammonia at an evaporating temperature of 0°C and +35°C condensing temperature, speed of the motor 975RPM.
|
|
1998 |
|
More information |
| DWM/Copeland |
|
D8D J1-600XBWM/D tank generator, type of refrigerant: R507/All |
|
101 kW |
|
Used and in good condition, complete DWM/Copeland tank generator, completed with an 8 cylinder discus semi-hermetic cool/freeze compressor, oil separator, liquid tank (111ltr), liquid separator for the suction of the compressors, securities. Mentioned cooling capacity is at an evaporating temperature of -10°, cooling capacity at an evaporating temperature of -30°C = 40kW.
|
|
2005 |
|
More information |
| DWM/Copeland |
|
D8DJ1-600X-BWM/D used cool-/freeze compressor, type of refrigerant: R507/All Freon |
|
101 kW |
|
Used cool-/freeze compressor, brand DWM/Copeland type D8DJ1-600X-BWM/D. This in very good condition cool-/freeze compressor (8 cylinders Discus compressor) is run on a cooled-water chiller with an evaporating temperature of -10°C with refrigerant R507. Cooling capacity at these conditions is 101kW. Cooling capacity at an evaporating temperature of -30°C is approx. 40kW.
|
|
2007 |
|
More information |
| Bitzer |
|
GSD80485VA used scroll compressor, type of refrigerant: R410A |
|
102 kW |
|
Used scroll compressor, brand Bitzer, type GSD80485VA. Mentioned cooling capacity of 102kW is at 0°C/ +40°C with the refrigerant R410A.
|
|
2018 |
|
More information |
| Bitzer |
|
HSN 7461-70 used screw package, type of refrigerant: R507/R404A/R22 |
|
105 kW |
|
Used and in good condition: complete Bitzer screw package consisting of built on frame liquid tank, oil separator, water cooled oil cooler, eco with plate intercooler for liquid undercooling (year 1993) and two young Bitzer screw compressors type HSN 7461-70, serial nr. 1071100881 and 10073001971, year 2005, manometer set with all safety devices. Mentioned cooling capacity is at-40°/+35°C with refrigerant R507.
|
|
1993 / 2005 |
|
More information |
| Carrier |
|
06 XF 299A 610G-EE used AC compressor, type of refrigerant: R407C |
|
106 kW |
|
Used and in very good condition: 6 zylinder Carrier AC compressor. Mentioned capacity is at 0°C evaporating.
|
|
2001/1996/1997 |
|
More information |
| Grasso |
|
RC 86 used piston package, type of refrigerant: R717/All Freon |
|
110 kW |
|
Used and in good maintained condition: complete Grasso direct drive 8 cylinder piston package, consisting of a 55 kW Schorch E-Motor, year 2004, oil separator, all security devices. Mentioned cooling capacity is at -10°C/+40°C.
|
|
1986 |
|
More information |
| Frascold |
|
Z-50-154.Y used AC compressor, type of refrigerant: R407C |
|
110 kW |
|
Used and in very good condition, AC compressor type Z-50-154.Y 6 cylinder. Mentioned cooling capacity is at an evaporating temperature of -0° evaporating temperature of -30°C = 7,3kW.
|
|
2002 |
|
More information |
| Bitzer |
|
6H-35.2Y/4G-20.2Y used piston package, type of refrigerant: R404A/All Freon |
|
112 kW |
|
Used Bitzer piston package. This in very good condition piston package is equipped with :
• 1 piece Bitzer piston compressor type 6H-35.2Y (frequency controlled at 60Hz)
• 1 piece Bitzer piston compressor type 4G-20.2Y
• Oil separator
• Vertical liquid tank
• Oil tank
• High/low pressure gauges with all necessary safety devices
• Control cabinet with frequency controller brand Danfoss
Mentioned cooling capacity of 112kW is with R404a at -8°C/+45°C.
|
|
2011 |
|
More information |
| Grasso |
|
RC 8-6 H used cooling compressor package, type of refrigerant: R507A |
|
118 kW |
|
Complete used Grasso cooling compressor package, consisting of oil separator, Leroy Somer E-motor, Grasso computer.
|
|
2004 |
|
More information |
| Mycom/Mayekawa |
|
N6WA used cooling compressor, type of refrigerant: NH3 |
|
120 kW |
|
Used and in good condition: open V-belt driven Mycom 6-cylinder cooling compressor, equipped with Leroy Somer 45kW E-motor (V-belt drive), meter set, high/low oil pressure safety devices, head cooling. Mentioned cooling capacity is at -5°C evaporating temperature and +30°C condensing temperature.
|
|
1993 |
|
More information |
| Bock |
|
HGX5/725-4S used cooling/freeze unit, type of refrigerant: R404/All Freon |
|
126 kW |
|
Used and in very good condition: complete Bock cooling/freeze unit, consisting of 2 pieces Bock piston compressors, type HGX5/725-4S, central suction manifold with insulated liquid separator (very suitable for hot gas defrost, oil separator, oil buffer tank, oil floaters mounted to the sumps of the compressors, liquid tank 400 Ltr., all necessary safety devices and switch-board. Mentioned cooling capacity is at +5°C evaporating temperature and +40°C condensing temperature.
|
|
2004 |
|
More information |
| Frick/Gram/York |
|
GSV-II-50 used screw compressor, type of refrigerant: R717/Ammonia |
|
138 kW |
|
Used and in very well maintained condition: low pressure screw compressor (booster) package (after overhaul only 3844 running hours), type unit GSV-II-50, type compressor GSV 50. This Gram/Frick screw package is equipped with shell & tube thermosiphon oil cooler, oil pump, Leroy Somer 45kW E-motor, Unisab II controller. Mentioned cooling capacity is at an evaporating temperature of -40°C and -10°C condensing with the refrigerant R717/ammonia.
|
|
1999 |
|
More information |
| Frascold |
|
C-TSH8-60-186Y used screw compressor, type of refrigerant: R407C |
|
138 kW |
|
Used, in very good condition, Frascold screw compressor. Cooling capacity with R407C at +0°C evaporating and 40°C condensing is 138 kW, absorbed power 39 kW.
|
|
2003 |
|
More information |
| Grasso |
|
RC4212used piston package, type of refrigerant: R717/NH3 |
|
138 kW |
|
Used Grasso/GEA two stage piston package. This in very good condition direct driven piston package is equipped with :
• 1 piece Grasso/GEA two stage piston compressor type RC4212
• Schorch 90kW E-motor
• Oil separator
• Closed intercooler
• All necessary safety devices
Mentioned cooling capacity of 138kW is with R717/ammonia at -32°C/+30°C at 1000RPM.
|
|
2000 |
|
More information |
| Bitzer |
|
CSH7571-90Y used cooling compressor, type of refrigerant: R134A |
|
150 kW |
|
Used screw compressor, brand Bitzer type CSH7571-90Y. This cooling compressor in very good condition with specification as:
• Refrigerant R134a
• Flow rate 258 m3/h on 2900RPM
• Eco connection
Mentioned cooling capacity is at 0°C /+40°C with eco on 50Hz /2900RPM.
Cooling capacity is 103kW at -10°C /+40°C with eco on 50Hz /2900RPM.
|
|
|
|
More information |
| Mycom/Mayekawa |
|
F4B used high pressure cooling compressor, type of refrigerant: R22/NH3 |
|
152 kW |
|
Used Mycom high pressure cooling compressor, well maintained, -10°C/+35°C.
|
|
1990 |
|
More information |
| Daikin |
|
ERAD 170 E-SS012 used condensing unit, type of refrigerant: R134A |
|
165 kW |
|
Used complete Daikin condensing unit type ERAD-170 E-SS012 for outdoor application. This in new condition condensing unit is equipped with:
• Daikin mono screw compressor type HSA312QS6YA (400/460V, 50/60Hz) with stepless capacity control
• Control box
Mentioned cooling capacity is with the refrigerant R134a at an evaporating temperature of 0 °C. Capacity at evaporating temperature of -10 °C is approx. 85kW.
|
|
2014 |
|
More information |
| Grasso |
|
35HP used piston package, type of refrigerant: R717/NH3 |
|
170 kW |
|
Used piston package brand Grasso/GEA type 35HP for heat pump application. This in very good condition direct driven piston package consists of the following main components:
• 1 piece Grasso 3-cylinder piston compressor type 35HP, direct driven
• 45kW WEG E-motor (400V,50Hz,1475RPM / 460V,60Hz,1770RPM)
• Vertical oil separator
• Pressure gauge set
• All security devices
• All necessary pressure certificates
Mentioned cooling capacity of 170kW is with refrigerant R717/NH3 at +32°C /+70°C, 1200RPM.
Cooling capacity with refrigerant R717/NH3 at +5°C /+35°C on 1475RPM/50Hz is 106kW, absorbed power 18,5 kW.
|
|
2011 |
|
More information |
| Howden |
|
WRV 204 110 36/1770 cool/freeze compressor, type of refrigerant: R717/Ammonia |
|
172 kW |
|
Used and in very well-maintained condition Howden WRV 204 110 36/1770 screw compressor package, equipped with the following main components:
ABB E-motor 160kW - 400V 50hrz/ 460V 60hrz.
Package is equipped with vertical oil separator, Shell & Tube oil cooler, oil pump en oil filter.
Eco connection
New Siemens PLC with HMI touch screen.
Swept volume 815 m3/h.
Mentioned cooling capacity is at an evaporating temperature of -40°C/+35°C/Eco 172kW.
|
|
2005 |
|
More information |
| Grasso |
|
FX LP 2 x 450 DUO used cool-/freeze package, type of refrigerant: R717/Ammonia |
|
172 kW |
|
Used in very well maintained condition: Grasso/GEA cool-/freeze package consisting of the following main components: two pieces built on frame Grasso/GEA HR - H36 S - 2 screw compressors screw compressors with each 160 kW Leroy-Somer E-motor (we can also deliver with 90 kW E-motors), central oil separator, oil pump with thermosifon oil cooler, eco connection. Switchboard cabinet with Siemens S7 PLC. Mentioned cooling capacity of 172 kW is at an evaporating temperature of -40°C +35°C condensing with eco, absorbed power 121 kW. Cooling capacity at -10°C +35°C condensing 592 kW absorbed power 166 kW. Unit is delivered with all the required TÜV certificates.
|
|
2008 |
|
More information |
| Bitzer |
|
3 X HSN 7471-75 used complete freezing Installation, type of refrigerant: R507 |
|
173 kW |
|
Used Bitzer Freeze package type 3 x HSN 7471-75. This Freeze package which is in very good condition, is equipped with the following main components:
• Frame built for indoor installation 3 piece HSN 7471-75 screw compressors, oil separator, oil filters, under cooler connected to the eco's of the compressors, liquid receiver.
• Separate control box with frequency control for the compressors.
• Separate air-cooled condenser of your choice.
• Freeze package will be tested after sale in our test room and a full test report will be supplied with a 3 months guarantee.
•
Mention colling capacity of 173kW is with refrigerant R507 at -40°C / +40°C / ECO.
|
|
2008 |
|
More information |
| Refcom |
|
SRC-S used AC screw compressor, type of refrigerant: R407C |
|
175 kW |
|
Used and in good condition, AC screw compressor ca. 250 kW of 0° evaporating.
|
|
2005 |
|
More information |
| Sabroe |
|
SAB 163HF MK1 used screw package, type of refrigerant: R717/Ammonia |
|
183 kW |
|
Used Sabroe screw package brand Sabroe, type SAB 163HF MK1. This, in very good maintained condition Sabroe screw package (serial nr. unit: 106277R) is equipped with:
• Schorch 75kW E-motor
• Oil separator
• Oil pump
• Thermosiphon water-cooled oil cooler
• Unisab III controller
Mentioned cooling capacity is at an evaporating temperature of -40°C/-10°C.
Note: This unit had a complete overhaul in 2010 and is equipped as low pressure compressor (booster).
|
|
2002/2010 |
|
More information |
| Bitzer |
|
CSH-8551-80Y-40D used screw compressor, type of refrigerant: R134A/All Types |
|
190 kW |
|
Used, but in very good condition, Bitzer AC screw compressor type CSH-8551-80Y-40D. Stroke volume 315 m³/h. Mentioned cooling capacity is at an evaporating temperature of 0°C with the refrigerant R134a.
|
|
2006 |
|
More information |
| FUSHENG |
|
SR-4 H used AC screw compressor |
|
190 kW |
|
Used, in good condition: FUSHENG AC screw compressor type SR-4 H.
|
|
2007 |
|
More information |
| Grasso |
|
RC 6-9 used piston package, type of refrigerant: Freon/Ammonia |
|
192 kW |
|
Used and in very good maintained condition: complete Grasso/GEA RC 6-9 direct drive piston package, consisting of the following main components: Schorch 90 kW E-motor 1470 RPM, oil separator. Mentioned cooling capacity is at an evaporating temperature of -10°C with the refrigerant ammonia.
|
|
1989 |
|
More information |
| Grasso |
|
RC 69 used compressor package, type of refrigerant: R717/Ammonia |
|
192 kW |
|
Used and in good condition: complete Grasso/GEA 69 V-belt driven compressor package, consisting of the following main components: Leroy-Somer 75 kW E-motor, oil separator, pressure gauge set + security, V-belt protective hood. Mentioned cooling capacity is at an evaporating temperature of -10°C with the refrigerant Amonia.
|
|
1990 |
|
More information |
| Carrier |
|
06 BB 277 – 600A EE used AC compressor, type of refrigerant: R22/All Freon |
|
198 kW |
|
Used and in very good condition: 6 zylinder Carrier AC compressor. Mentioned capacity is at 0°C evaporating, on 60 Hz 460 V E-power 92.5 kW.
|
|
1994 |
|
More information |
| Dorin |
|
K4000CC / used tandem tank aggregate type of refrigerant: R507/R404A |
|
200 kW |
|
Used and in good condition: complete Dorin tandem tank aggregate, equipped with the following main components: Dorin tandem compressor set with two 6-cylinder cooling compressors model K4000 CC, oil separator, liquid vessel 98 Litre, switch-board with all controls and relays.
|
|
2002 |
|
More information |
| DWM/Copeland |
|
D6 CM1-70 used AC compressor, type of refrigerant: R22/R407C |
|
205 kW |
|
Used complete AC compressor.
|
|
1998 |
|
More information |
| Mycom/Mayekawa |
|
N8WA used cool compressor, type of refrigerant: R717/Ammonia |
|
212 kW |
|
Used cool compressor, brand Mycom type N8WA. This in very good maintained condition Mycom cooling compressor is equipped with the following main components: on frame built Mycom 8 cylinders direct drive piston cool compressor, 75kW MEC motors NV E-motor 400V/ 50z / 1485RPM, oil separator, water-cooled oil cooling, meterset, head cooling by water, swept volume of compressor 375m3/h at 1450RPM. Mentioned cooling capacity of 212kW is at an evaporating temperature of -10°C and a condensing temperature +35°C.
|
|
1995 |
|
More information |
| DWM/Copeland |
|
D8 DJ 6000 used cool compressor / freeze compressor, type of refrigerant: R22/All Freon |
|
220 kW |
|
Used, well maintained cool/freeze compressor set with oil separator, liquid vessel, switch-board, etc. Set can be delivered with condenser and/or coolers. Capacity 220kW at -5/+40°C or 62kW at -30/+40°C.
|
|
1993 |
|
More information |
| Bitzer |
|
HSK 7451 used screw package, type of refrigerant: R507/404A |
|
230 kW |
|
Used and in very good condition: complete Bitzer screw package consists of oil separator built on frame, two pieces semi hermetic Bitzer screw compressors type HSK 7451, panel with meterset and safety devices, liquid storage tank, suction manifold. Mentioned cooling capacity is at an evaporating temperature of -10°C and condensing temperature +40°C. Cooling capacity at evaporating temperature of -20°C is 149kW.
|
|
2000 |
|
More information |
| Grasso |
|
610 used piston package, type of refrigerant: R717/Ammonia |
|
238 kW |
|
Used and in condition as new (very few running hours: C1:11000 hours, C2: 8190 hours, C3: 3200 hours): 3 pieces Grasso/GEA piston package type 610, direct driven 1450 RPM, equipped with each a 75kW Leroy-Somer E-motor, oil separator, meter set. The compressors will be delivered with all necessary PED/TÜV certificates. Mentioned cooling capacity is with refrigerant R717 at -9°C evaporating temperature and +33°C condensing temperature.
|
|
2008 |
|
More information |
| Frick/Gram/York |
|
HC8 100 used piston package, type of refrigerant: R717/Ammonia |
|
245 kW |
|
Used and in very well condition: Gram HC8 100 piston package, equipped with an 8 cylinder compressor, oil separator, 75kW Schorch E-motor 1200 RPM. Swept volume compressor: 376 m³/h.
|
|
1991 |
|
More information |
| Trane |
|
CHHP0M21KG0N092H used AC screw compressor, type of refrigerant: R134A |
|
245 kW |
|
Used: AC Trane screw compressor, working with the refrigerant R134a. Mentioned cooling capacity is at an evaporating temperature of 0°C with the refrigerant R134a.
|
|
2000 |
|
More information |
| Bitzer |
|
4H-15.2Y / 6H-25.2Y- 40P used cool / freeze unit, type of refrigerant: R507/All Freon |
|
245 kW |
|
Used and in new condition: complete Bitzer / Carrier cool / freeze unit, consisting of the following main components: 3 cool/freeze compressors type 4H-15.2Y and 2 cool/freeze type 6H-25.2Y compressors, electronic oil floaters, oil separator, central suction manifold, switch-board with complete control system. Mentioned cooling capacity is at an evaporating temperature of -10°C with refrigerant R404A/507. Cooling capacity is 100kW at an evaporating temperature of -30°C.
|
|
2010 |
|
More information |
| Bitzer |
|
4 x 6H 25.2Y used cool/freeze installation, type of refrigerant: R404A/507C |
|
246 kW |
|
Used in very good maintained condition: complete Bitzer/Goedhart cool/freeze installation consisting of the following main components; 1 x Bitzer unit for outside use with built in 1 x Bitzer central unit with 4 pieces 6H 25.2Y compressors (capacity control 0-33%-66%-100%) with an oil flow-back system and oil floaters on the carters of the compressors. Separately is delivered a Profroid air-cooled condenser type C7AH 10 MD4-12 PS (528 kW at DT15 K) with 10 ventilators. Switchboard cabinet with the complete control system. Mentioned cooling capacity is with the refrigerant R404 at -10°C evaporating and +40°C condensing. Freezing capacity at -30°C evaporating is 104 kW.
|
|
2004 |
|
More information |
| Grasso |
|
RC411 used piston package, type of refrigerant: R717/NH3 |
|
260 kW |
|
Used single stage piston package, brand Grasso/GEA type RC411. This in good condition used Grasso/GEA RC 411 single stage compressor consist of the following main components:
Grasso 4-cylinder piston compressor type RC411, V-belt driven
Schorch E-motor 75kW,1470 RPM - 400V 50Hz 460V 60Hz 1770RPM
Vertical oil separator
Pressure gauge set
All safety devices
V-belt protective hood
Mentioned cooling capacity of 260kW is with refrigerant R717/NH3 at -10°C /+35°C on 1000RPM.
|
|
1980 |
|
More information |
| Mycom/Mayekawa |
|
N6WB used cool compressor, type of refrigerant: R717/Ammonia |
|
261 kW |
|
Used cool compressor, brand Mycom type N6WB. This in very good maintained condition Mycom cooling compressor is equipped with the following main components: on frame built Mycom 6 cylinders direct drive piston cool compressor, 90 kW FENNER E-motor 400V/460V / 50/60Hz / 985RPM, oil separator, water-cooled oil cooling, meterset, head cooling by water, swept volume of compressor 573m3/h at 1450RPM. Mentioned cooling capacity of 261kW is at an evaporating temperature of -12°C and a condensing temperature +30°C.
|
|
1995 |
|
More information |
| Mycom/Mayekawa |
|
N8WA used cool compressor package, type of refrigerant: R717/Ammonia |
|
267 kW |
|
Used and in very well condition: open V-belt driven Mycom 8 cylinder cool compressor package, equipped with a Leroy Somer 75kW E-motor. Head cooling by means of water.
|
|
2000 |
|
More information |
| Grasso |
|
810P used compressor package, type of refrigerant: NH3/R717 |
|
300 kW |
|
Used: Grasso cooling/freeze compressor package. This Grasso cooling/freeze compressor package type 810P is in very good condition, V-belt driven, 1500 RPM, consists of the following main components, built on a frame: Grasso compressor 810P, Schorch 110kW E-motor, motor protective hood, oil separator, meter set low/high pressure, oil pressostat. Mentioned cooling capacity is with refrigerant R717, speed 1500RPM, at an evaporating temperature of -10°C and 35°C condensing temperature, absorbed electrical power 82kW.
|
|
2004 |
|
More information |
| DWM/Copeland |
|
D4DH-250XAWM used compressor unit: type of refrigerant: R404A |
|
300 kW |
|
Used and in very good condition, DWM/Copeland compressor unit, equipped with 4 semi-hermetic DWM/Copeland Discus compressors type D4DH-250XAWM, built on a central frame. Furthermore the compressor unit is equipped with a central manifold, oil return system, oil storage drum, oil separator, oil floaters, meter set with all safety devices, liquid storage tank.
|
|
2000 |
|
More information |
| Frick/Gram/York |
|
TDSH 233S used screw compressor package, type of refrigerant: NH3/Ammonia |
|
300 kW |
|
Used and in very well maintained condition: low pressure (booster) Frick screw compressor package, compressor type TDSH 233S, year 2003, type package GSVII-147, swept volume 1471 m3/h, year 1998, equipped Leroy Somer 90kW E-motor, Grammatic / Cellmatic controller, water glycol shell & tube oil cooler, oil separator oil pump. Mentioned cooling capacity is at -40°/-12°C. All TüV certificates available.
|
|
2003 |
|
More information |
| Frick/Gram/York |
|
TDSH 233S used screw compressor package, type of refrigerant: NH3/Ammonia |
|
300 kW |
|
Used and in very well maintained condition: low pressure (booster) Frick screw compressor package, compressor type TDSH 233S, year 1998, type package GSVII-147, swept volume 1471 m3/h, year 1998, equipped Leroy Somer 90kW E-motor, Grammatic / Cellmatic controller, water glycol shell & tube oil cooler, oil separator oil pump. Mentioned cooling capacity is at -40°/-12°C. All TüV certificates available.
|
|
1998 |
|
More information |
| Carrier |
|
5H60-C109 used cool compressor, type of refrigerant: All Freon |
|
300 kW |
|
Used cool compressor, brand Carrier type 5H60-C109 is equipped as complete package, direct drive E-motor, built on frame. This open drive Carrier 6 cylinders compressor is run on an evaporating temperature of 0°C.
|
|
2000 |
|
More information |
| Grasso |
|
810 used cool/freeze compressor package, type of refrigerant: Ammonia/R717 |
|
300 kW |
|
Used: Grasso/GEA cool/freeze compressor package. This is in very good condition Grasso/GEA cool/freeze compressor package type 810 directly driven by Leroy-Somer 110kW E-motor, consists of the following main components: E-motor, oil separator, meter Grasso controller. Mentioned cooling capacity is with refrigerant R717 at an evaporating temperature of -10°C and condensing temperature +35°C, absorbed electrical power 82kW. Compressor package will be delivered with all necessary pressure certificates.
|
|
2008 |
|
More information |
| Sabroe |
|
SMC 106L used cooling compressor, type of refrigerant: R717/NH³ |
|
300 kW |
|
Used cooling compressor, brand Sabroe, type 106L. This in good condition used cooling compressor and consist of the following main components:
• Sabroe 6 cylinder SMC 106L direct driven compressor
• Schorch 75 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130645 C. 2: 130644
|
|
2005 |
|
More information |
| Carrier |
|
06NW2300-S5NC-A00 used screw compressor, type of refrigerant: 134A |
|
305 kW |
|
Used and in very good condition: Carrier/Carlyle screw compressor for AC application, model 06 NW 2300 S 5NC – A00.
|
|
2002 |
|
More information |
| Carrier |
|
06NA2300S5EA-A00 used screw compressor, type of refrigerant: R134A |
|
305 kW |
|
Used and in very good condition: Carrier / Carlyle screw compressor for AC application, model: 06NA2300S5EA-A00.
|
|
2001 |
|
More information |
| Bitzer |
|
2x HSK 7461-80 used screw package, type of refrigerant: R404A/507 |
|
326 kW |
|
Used and in very good condition: complete Bitzer screw package consisting of oil separator built on frame, two semi hermetic Bitzer screw compressors type HSK 7461-80, panel with meterset and protection, complete switchboard cabinet wit starter set. Mentioned cooling capacity is at -10°C/+40°C with the refrigerant R507.
|
|
2008 |
|
More information |
| McQuay/Daikin |
|
HSW 2050Y13YBS used mono screw compressor |
|
334 kW |
|
Used and in very good condition, a Mc Quay/Daikin mono screw compressor type HSW 2050Y13YBS style M350234036-15, serial-nbr. C04M0 5339-25 400/460 Volt 50/60 Hz LRA 593/557.
|
|
2004 |
|
More information |
| Sabroe |
|
SMC 8100 used cool compressor, type of refrigerant: R717/Ammonia |
|
335 kW |
|
Used cool compressor, brand Sabroe type SMC 8100. This in good condition Sabroe open driven piston package is equipped with the following main components V-belt driven 8 cylinder piston compressor, 90 kW E-motor, oil separator. Mentioned cooling capacity of 335kW is at an evaporating temperature of -10°C and condensing temperature +35°C with refrigerant R717/Ammonia.
|
|
1978 |
|
More information |
| Grasso |
|
V450 used refrigeration compressor package, type of refrigerant: R717/Ammonia |
|
335 kW |
|
Used Grasso/GEA V450 ammonia refrigeration compressor package. This refrigeration compressor is in very good condition and is equipped with the following main components:
WEG- E-motor 90kW 380/460V 50/60Hz.
Grasso maintenance monitor.
Swept volume 435 M3/h.
All the necessary protections.
mentioned cooling capacity of 335kW is condensing at an evaporation temperature of 0°C and +35°C.
|
|
2015 |
|
More information |
| Grasso |
|
VR-V26B-28 used cool-/freeze screw package (booster), type of refrigerant: Ammonia/R717 |
|
338 kW |
|
Used and in very good condition (always maintained by GEA; compressor block replaced in 2010). Unit is equipped with vertical oil separator, oil pump, water-cooled oil cooler shell & tube type with the possibility for Thermosifon cooling, controller of this unit through with new Siemens PLC/Simatic touchscreen will be supplied by Comron International, new Leroy-Somer 355kW E-motor 400/460V 50/60Hz. Mentioned cooling capacity at evaporating temperature of -40°C and condensing temperature of +35°C with eco is 338kW absorbed power of 208kW. Cooling capacity at 60Hz 3600RPM is ca. 422kW.
|
|
1994/2010/2021 |
|
More information |
| Frick/Gram/York |
|
GSV-II-50 used screw package, type of refrigerant: R717/Ammonia |
|
363 kW |
|
Used and in very well maintained condition: high pressure screw package (after overhaul only 8485 running hours), type unit GSV-II-50, type compressor GSV 50. This Gram/Frick screw package is equipped with shell & tube thermosiphon oil cooler, oil pump, Leroy Somer 110kW E-motor, Unisab II controller. Mentioned cooling capacity is at an evaporating temperature of -10°C with the refrigerant R717/ammonia. At an evaporating temperature of 0°C this is ± 500kW, at an evaporating temperature of -40°C it is ±70kW.
|
|
1999 |
|
More information |
| Frick/Gram/York |
|
TDSH 163L used screw compressor package, type of refrigerant: NH3/Ammonia |
|
375 kW |
|
Used and in very well maintained condition: high pressure Frick screw compressor package type TDSH163L, swept volume 635 m3/h, year 2001, type package GSVII-64, year 1998, equipped Leroy Somer 160kW E-motor, Grammatic / Cellmatic controller, water glycol Alfa Laval plate oil cooler, oil separator oil pump. Mentioned cooling capacity is at -12°C/+42°C. Cooling capacity at -40°C/+35°C with eco is 120kW, absorbed electric power 87kW. Cooling capacity at -35°/+35°C with eco is 156,5kW, absorbed electric power is 92kW. All TüV certificates available.
|
|
2001 |
|
More information |
| Frick/Gram/York |
|
TDSH 163L used screw compressor package, type of refrigerant: NH3/Ammonia |
|
375 kW |
|
Used and in very well maintained condition: high pressure Frick screw compressor package type TDSH163L, swept volume 635 m3/h, year 2003, type package GSVII-64, year 1998, equipped Leroy Somer 160kW E-motor, Grammatic / Cellmatic controller, water glycol Alfa Laval plate oil cooler, oil separator oil pump. Mentioned cooling capacity is at -12°C/+42°C. Cooling capacity at -40°C/+35°C with eco is 120kW, absorbed electric power 87kW. Cooling capacity at -35°/+35°C with eco is 156,5kW, absorbed electric power is 92kW. All TüV certificates available.
|
|
2003 |
|
More information |
| Grasso |
|
RC611 used piston package, type of refrigerant: R717/NH3 |
|
390 kW |
|
Used piston package, brand Grasso/GEA type RC611. This in good condition V-belt driven piston package consists of the following main components:
Grasso 6-cylinder piston compressor type RC611, V-belt driven
160kW E-motor Leroy-Somer
Vertical oil separator
Pressure gauge set
All safety devices
V-belt protective hood
Flow rate 798 m3 /h
Serial N. Unit 1: 950355 Unit 2: 56 Unit 3: 57
Mentioned cooling capacity is with refrigerant R717/NH3 at -10°C /+35°C on 1000RPM.
|
|
1995 |
|
More information |
| Sabroe |
|
SMC 106L used cooling compressor, type of refrigerant: R717/NH³ |
|
400 kW |
|
Used cooling compressor, brand Sabroe, type 106L. This in good condition used cooling compressor consists of the following main components:
• Sabroe 6 cylinder SMC 106L direct driven compressor
• Schorch 75 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 109614 C. 2: 109613
|
|
1998 |
|
More information |
| Refcom |
|
SRC-S-452-L4 used AC screw compressor, type of refrigerant: R407C |
|
400 kW |
|
In good condition: Used AC screw compressor, approx. 400 kW at 0°C evaporating temperature. Swept volume compressor: 482 m3/h.
|
|
2007 |
|
More information |
| Grasso |
|
RC611 used piston package, type of refrigerant: R717/NH3 |
|
433 kW |
|
Used piston package brand Grasso/GEA type RC611. This in good condition V-belt driven piston package consists of the following main components:
• Grasso 6-cylinder piston compressor type RC611, V-belt driven
• Crompton Parkinson 110kW E-motor (400V,50Hz,1475RPM)
• Vertical oil separator
• Pressure gauge set
• All safety devices
• V-belt protective hood
• Compressor built in 2007, frame 1978
Mentioned cooling capacity of 443kW is with refrigerant R717/NH3 at -10°C /+35°C on 1000RPM.
|
|
1989/2007 |
|
More information |
| Grasso |
|
YR-Y26B-28 used cooling-/freezing screw package, type of refrigerant: R717/Ammonia |
|
449 kW |
|
Used and in very good condition (always maintained by GEA; compressor block type of YR-Y26B-28 replaced in 2010. Unit is equipped with vertical oil separator, oil pump, vertical oil cooler, water-cooled oil cooler shell & tube type with the possibility for Thermosifon cooling, controller of this unit through with new Siemens PLC /Simatic touchscreen will be supplied by Comron International, new Schorch E-motor 400kW 400/460V 50/60Hz. Mentioned cooling capacity at evaporating temperature of -40°C and condensing temperature of +35°C with eco is 449kW absorbed power of 307kW. Cooling capacity at 60Hz 3600RPM is approx. 596kW.
|
|
1994/2010/2021 |
|
More information |
| Grasso |
|
RC612 used piston package, type of refrigerant: R717/NH3 |
|
450 kW |
|
Used piston package brand Grasso/GEA type RC612. This in good condition V-belt driven piston package consists of the following main components:
• Grasso 6-cylinder piston compressor type RC612, V-belt driven
• 110kW E-motor
• Vertical oil separator
• Pressure gauge set
• All safety devices
• V-belt protective hood
Mentioned cooling capacity is with refrigerant R717/NH3 at 0°C /+40°C on 1000RPM.
|
|
1996 |
|
More information |
| Sabroe |
|
SMC 106E used cooling compressor, type of refrigerant: R717/NH³ |
|
500 kW |
|
Used cooling compressor, brand Sabroe, type 106E. This in good condition used cooling compressor consists of the following main components:
• Sabroe 6 cylinder direct driven compressor
• Leroy-Somer 110 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130647 C. 2: 130646
|
|
2005 |
|
More information |
| Sabroe |
|
SMC 106E used cooling compressor, type of refrigerant: R717/NH³ |
|
500 kW |
|
Used cooling compressor, brand Sabroe, type 106E. This in good condition used cooling compressor consists of the following main components:
• Sabroe 6 cylinder direct driven compressor
• Leroy-Somer 110 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130647 C. 2: 130646
|
|
2005 |
|
More information |
| Howden |
|
MK4C WRV 255-165-26 used screw compressor, type of refrigerant: NH3 |
|
500 kW |
|
Used Howden NH3 (Ammonia) screw compressor, completely overhauled by SES in 2003 and as new. Capacity of this compressor with NH3/ammonia at -40°/+35°C is 500kW, electrical capacity is 315kW; at high pressure -10°/+35°C the capacity is 1510kW.
|
|
2003 |
|
More information |
| Frick/Gram/York |
|
TDSH163S1530A used screw package, type of refrigerant: NH3 |
|
500 kW |
|
Unit with few operating hours. Used screw package with water cooled condenser, oil separator, oil cooler. Constructed as waterchiller. Can be used as separate compressor package for pump ammonia/NH3 system high temp. -10°C as well as -40°C.
|
|
1996 |
|
More information |
| Howden |
|
WRV255/16526/754 used screw package, type of refrigerant: R717/Ammonia |
|
500 kW |
|
Used: Howden screw package. This unit is equipped as low pressure compressor package (booster model), but, if desired, can be provided with a big E-motor for -40°/+35°C application. Howden unit is equipped with oil separator, oil pump, thermos syphon oil cooler, 132kW Schorch E-motor. Capacity of 500kW is at -40°/+35°C, absorbed power 315kW. At high pressure -10°/+35°C the capacity is 1510kW.
|
|
1981 |
|
More information |
| Stal |
|
SVA 26 B-CAD-PBF-ABC-EAB screw package, type of refrigerant: NH3/Ammonia |
|
520 kW |
|
In new condition: complete screw package (high pressure), cooling capacity of 520 kW at -10°/+35°C. Equipped with 192 kW Schorch E-motor and Stalectronic 700 operating system. Complete service was done on 10-02-2002.
|
|
2002 (overhauled) |
|
More information |
| Grasso |
|
RC-9-11 used piston package, type of refrigerant: R717/NH3 |
|
571 kW |
|
Used single stage Grasso/GEA piston package type RC 9-11. This in good condition Grasso/GEA RC 9-11 single stage piston package is equipped with :
• Grasso 9-cilinder piston compressor type RC9-11, V-belt driven.
• Elektrim E-motor 200 kW / 1470 RPM – 400V - 50Hz / 1770 RPM – 460V - 60Hz / Year 2002.
• Vertical oil separator.
• All necessary safety devices.
• V-belt protection cover.
Mentioned cooling capacity of 571 kW is with R717/NH³ at -10°C/+35°C at 1000 RPM.
|
|
1986/2002 |
|
More information |
| Frick/Gram/York |
|
GSV 263-13016 used screw compressor package, type of refrigerant: NH3/Ammonia |
|
575 kW |
|
Used and in very well maintained condition: low pressure (booster) screw compressor package, complete with TüV certificates, consisting of the following main components: 160kW Loher E-motor, Gram oil separator with oil pump, Gram controller, Gram water glycol shell & tube oil cooler. Swept volume compressor: 2632 m3/h. Mentioned cooling capacity is at -40°C/-9°C.
|
|
1992 |
|
More information |
| Frick/Gram/York |
|
GSB 263-0074GG used screw compressor package, type of refrigerant: NH3/Ammonia |
|
575 kW |
|
Used and in very well maintained condition: low pressure (booster) screw compressor package, complete with TüV certificates, consisting of the following main components: 160kW Loher E-motor, Gram oil separator with oil pump, Gram controller, Gram water glycol shell & tube oil cooler. Swept volume compressor: 2632 m3/h. Mentioned cooling capacity is at -40°C/-9°C.
|
|
1991 |
|
More information |
| Bitzer |
|
used cooling plant, type of refrigerant: R404A/All Freon |
|
581 kW |
|
Used and in condition as new (only 1150 hours in production) complete Bitzer cooling installation (built in an isolated container for outdoor application ) is equipped with the following main components:
• 3 pieces Bitzer screw packages type HSK 7461-80, each package with 63 kW E-motor, oil filter, low-/high pressure gauges, low-/ high pressure switch
• Central oil separator
• Vahterus heat exchanger type PHSE-3LL-108-1/1 for liquid subcooling
• Complete control cabinet
• Refrigeration and electrical drawings
Mentioned cooling capacity of is with the refrigerant R404a at -3°C/ +35°C with an absorbed power 154 kW.
Cooling capacity at -10°C / +35°C is 435 kW.
|
|
2011 |
|
More information |
| Mycom/Mayekawa |
|
N4WBH used industrial cooling compressor, type of refrigerant: R717/Ammonia |
|
590 kW |
|
Used Mycom/Mayekawa industrial cooling compressor type N4WBH with a few operating hours is equipped with the following main components:
• on frame built direct driven Mycom piston compressors type N4WBH with each 110kW WEG E-motors
• Oil separator
• All necessary pressure certificates
The mentioned cooling capacity of 590kW is at an evaporating temperature of +10°C.
|
|
2015 |
|
More information |
| Howden |
|
MK4A/WRV204/16536/70 used screw compressor, type of refrigerant: NH3/All |
|
600 kW |
|
Young, used Howden screw compressor type MK4A/WRV204/16536/70, in 2008 completely overhauled. Cooling capacity with R22 at -15°/+35°C is 600 kW.
|
|
2008 |
|
More information |
| Howden |
|
WRV204/11036/488 used screw package, type of refrigerant: R717/Ammonia |
|
600 kW |
|
Used: Howden screw package. This unit is equipped as low pressure compressor package (booster model), but, if desired, can be provided with a big E-motor for -40°/+35°C application.
|
|
1981 |
|
More information |
| Grasso |
|
612E used piston package, type of refrigerant: R717/NH3 |
|
663 kW |
|
Used Grasso/GEA piston package. This in very good condition direct driven piston package is equipped with :
• 1 piece Grasso/GEA piston compressor type 612E
• Schorch E-motor 200 kW /1480 RPM
• All necessary safety devices
Mentioned cooling capacity of 663 kW is with R717/ammonia at 0°C/+35°C at 1480RPM.
|
|
2004 |
|
More information |
| Stal |
|
S 26 B used screw package, type of refrigerant: R717/Ammonia |
|
680 kW |
|
Used and in very well maintained condition: Vertical Stall/ABB Screw package type S 26 B complete with 160 kW E-motor, ABB controller, all necessary certificates. Mentioned cooling capacity is at 0°C evaporating and +35°C condensing with the refrigerant R717/ammonia. Flow rate 394 m3/h.
|
|
1995 |
|
More information |
| Grasso |
|
412E used pistonpackage, type of refrigerant: R717/NH3 |
|
681 kW |
|
Used single stage Grasso/GEA piston package type 412E. This in good condition Grasso/GEA 412E single stage piston package is equipped with :
• Grasso 4-cilinder piston compressor type 412E
• Schorch E-motor 132 kW /1470 RPM – 400V – 50 Hz / 1770 RPM - 460V – 60Hz
• All necessary safety devices
Mentioned cooling capacity of 681 kW is with R717/NH³ at 0°C/+35°C at 1475 RPM.
|
|
2003 |
|
More information |
| Sabroe |
|
2 x SMC 106L SPLIT industrial cooled-water chiller, type of refrigerant: R717/Ammonia |
|
796 kW |
|
Used industrial air-cooled water chiller ( split model, air-cooled/evaporating condenser separate). This in very good maintained condition industrial chiller is equipped with the following main components: on frame built 2 pieces direct driven Sabroe SMC 106L piston compressors with each of Schorch 75kW E-motors. (suitable for 460V/60Hz), oil separator, water-cooled head cooling for the compressors, Retech high pressure liquid tank of 325L, Alva-Laval M10-EWFGR plate cooler coupled to a Retech separator of 416L for natural ammonia circulation. Furthermore, this good looking chiller is equipped with 2 pieces Unisab II for the controller of the compressors and switch-board. Mentioned cooling capacity is at a water/glycol outlet temperature of +6°C. Cooling capacity at a water/glycol outlet temperature of -5°C is approx.. 500kW. Cooling capacity on 60Hz at water/glycol outlet temperature of +6°C is 955kW.
|
|
1998 |
|
More information |
| Stal |
|
SRM S75 EB-26A complete screw package, type of refrigerant: NH3 |
|
800 kW |
|
In new condition: complete screw package (Booster type), cooling capacity of 800 kW at -40°/-10°C. Equipped with Stalectronic 700 operating system. Service was done in February 2000.
|
|
2000 (overhauled) |
|
More information |
| Grasso |
|
RC1212 used piston package, type of refrigerant: R717/Ammonia/All Freon |
|
895 kW |
|
Used piston package, brand Grasso/GEA type RC1212. This in very good condition piston package consists of the following main components:
Grasso 12-cylinder piston compressor, type RC1212, direct driven
290 kW Schorch E-motor, 995RPM
Vertical oil separator
All safety devices / Pressure gauge set
Flow rate 1592 m3/h
Mentioned cooling capacity is with refrigerant R717/NH3 , 0°C /+40°C at 1000RPM.
|
|
1998 |
|
More information |
| Howden |
|
MK4B WRV 321-165-26 used screw compressor, type of refrigerant: NH3 |
|
1025 kW |
|
Used Howden screw compressor overhauled by SES in 2004 and in new condition. Capacity is 1025kW with NH³/Ammonia at -38/+35°C with economizer, electrical capacity is 637kW.
|
|
2004 |
|
More information |
| Howden |
|
MK4B/WRV321/19336/052 used screw package, type of refrigerant: NH3/Ammonia |
|
1057 kW |
|
Used and in very well maintained condition: low pressure (booster) Howden screw package, compressor type WRV321-193-36, equipped with the following main components: Stanref oil separator, Stanref oil cooler (thermo syphon), oil pump, ABB 315 E-motor. Mentioned cooling capacity is at an evaporating temperature of -40°C and -10°C condensing temperature. This unit can also be delivered with a WRV 255/165 compressor, then the cooling capacity will be 451kW at -40°C /+35°C with eco, absorbed power 312kW.
|
|
2005 |
|
More information |
| Aerzen/Emicon |
|
VMX 346 HR used screw package, type of refrigerant: R717/Ammonia |
|
1220 kW |
|
Used and in very well maintained condition: High pressure screw package, complete with TÜV certificates, consisting of the following main components: 355 kW Schorch E-motor, oil separator, oil pump, Siemens S7/touch screen with software to be delivered new. Swept volume compressor 1663.2 m³/h. Mentioned cooling capacity is at -10°C evaporating and +35°C condensing. Absorbed power 300 kW with the refrigerant R717/ammonia. Cooling capacity at -40°C/+35°C with eco approx. 320 kW.
|
|
2001 |
|
More information |
| Grasso |
|
V1400 used cooling compressor, type of refrigerant: R717/NH3 |
|
1223 kW |
|
Used single stage cooling compressor, brand Grasso/GEA type V1400.
This is really good condition. Used cooling compressor consist of the following main components:
Grasso/GEA 8 cylinder/piston V1400 compressor pack
250 kW E-motor, brand WEG (maximum 1190 RPM)
Grasso maintenance monitor
Mentioned cooling capacity of 1123kW is with refrigerant R717/NH3 at 0°C /+35°C, 1200RPM.
|
|
2014 |
|
More information |
| Frick/Gram/York |
|
YCCH233L0142YF used screw compressor package, type of refrigerant: R134A/All types |
|
1297 kW |
|
Complete and in very good condition: Frick screw compressor package originating from a water-cooled chiller, type Frick compressor YCCH233L0142YF, is supplied with high efficiency 200 kW Toshiba electric motor.
|
|
1996 |
|
More information |