| Brand |
|
Type |
|
kW |
|
Description |
|
Year |
|
More info |
| Sabroe |
|
CMO 24 used piston package, type of refrigerant: R717/Ammonia |
|
53 kW |
|
Used and in very well maintained: complete YORK CMO 24 piston package, equipped with Leroy Somer E-motor 13,5 kW 1450 RPM, oil separator, unisab II controller. Identification No. 504252, Max. 1800 RPM, swept volume 116 m³/h. Mentioned capacity by -10℃ evaporation temperature and +35℃ condensation temperature with refrigerant ammonia.
|
|
2006 |
|
More information |
| Sabroe |
|
SMC 106L used cooling compressor, type of refrigerant: R717/NH³ |
|
300 kW |
|
Used cooling compressor, brand Sabroe, type 106L. This in good condition used cooling compressor and consist of the following main components:
• Sabroe 6 cylinder SMC 106L direct driven compressor
• Schorch 75 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130645 C. 2: 130644
|
|
2005 |
|
More information |
| Sabroe |
|
SMC 8100 used cool compressor, type of refrigerant: R717/Ammonia |
|
335 kW |
|
Used cool compressor, brand Sabroe type SMC 8100. This in good condition Sabroe open driven piston package is equipped with the following main components V-belt driven 8 cylinder piston compressor, 90 kW E-motor, oil separator. Mentioned cooling capacity of 335kW is at an evaporating temperature of -10°C and condensing temperature +35°C with refrigerant R717/Ammonia.
|
|
1978 |
|
More information |
| Sabroe |
|
SMC 106L used cooling compressor, type of refrigerant: R717/NH³ |
|
400 kW |
|
Used cooling compressor, brand Sabroe, type 106L. This in good condition used cooling compressor consists of the following main components:
• Sabroe 6 cylinder SMC 106L direct driven compressor
• Schorch 75 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 109614 C. 2: 109613
|
|
1998 |
|
More information |
| Sabroe |
|
SMC 106E used cooling compressor, type of refrigerant: R717/NH³ |
|
500 kW |
|
Used cooling compressor, brand Sabroe, type 106E. This in good condition used cooling compressor consists of the following main components:
• Sabroe 6 cylinder direct driven compressor
• Leroy-Somer 110 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130647 C. 2: 130646
|
|
2005 |
|
More information |
| Sabroe |
|
SAB 233E VSD new cool-/freeze screw package, type of refrigerant: NH3/R717 |
|
542 kW |
|
New complete refrigeration/freezing screw package equipped with:
Horizontal oil separator
Oil pump
Thermosiphon oil cooler, shell & tube type
New Siemens S7 PLC/HMI touchscreen or Unisab III (optional)
ABB electric motor 570 kW,400/460V, 50/60 Hz, IE4, IP55
Economizer connection set consisting of stop valves, check valves and strainer
At an additional cost, we can supply the original control cabinet equipped with integrated Danfoss frequency converters
All required PED pressure certificates
The mentioned cooling capacity is based on an evaporation temperature of -40°C and a condensing temperature of +35°C. With economizer, the absorbed power is 343.8 kW at a compressor speed of 3,600 rpm. The cooling capacity at an evaporation temperature of -3°C is 2,439.8 kW and absorbed power is 495 kW.
|
|
Nieuw/New/Neu |
|
More information |
| Sabroe |
|
SMC 116L used refrigeration compressor, type of refrigerant: R717/NH³ |
|
669 kW |
|
Used refrigeration compressor, Sabroe brand, type 116L. This used refrigeration compressor in good condition consists of the following main components:
Sabroe 16-cylinder direct drive compressor
Leroy-Somer 200kW E-Motor 380-460V 50/60 Hz
Vertical oil separator
Unisab II controller
Serial No. Compressor 132154
Swept volume 1131m³/h
Capacity -10/+35°C 669kW
|
|
2005 |
|
More information |
| Sabroe |
|
2 x SMC 106L SPLIT industrial cooled-water chiller, type of refrigerant: R717/Ammonia |
|
796 kW |
|
Used industrial air-cooled water chiller ( split model, air-cooled/evaporating condenser separate). This in very good maintained condition industrial chiller is equipped with the following main components: on frame built 2 pieces direct driven Sabroe SMC 106L piston compressors with each of Schorch 75kW E-motors. (suitable for 460V/60Hz), oil separator, water-cooled head cooling for the compressors, Retech high pressure liquid tank of 325L, Alva-Laval M10-EWFGR plate cooler coupled to a Retech separator of 416L for natural ammonia circulation. Furthermore, this good looking chiller is equipped with 2 pieces Unisab II for the controller of the compressors and switch-board. Mentioned cooling capacity is at a water/glycol outlet temperature of +6°C. Cooling capacity at a water/glycol outlet temperature of -5°C is approx.. 500kW. Cooling capacity on 60Hz at water/glycol outlet temperature of +6°C is 955kW.
|
|
1998 |
|
More information |