Buy and Sell Used Industrial Refrigeration Equipment - T +31 (0)297 565 443 - info@comronbv.com

Compressors, Condensing units


IMG_2527Piston Pack.53kw.jpg
IMG_2527Piston Pack.53kw.jpg IMG_2529Piston Pack.53kw.jpg IMG_2531Piston Pack.53kw.jpg nixel.gif nixel.gif

Description / remarks:  Used and in very well maintained: complete YORK CMO 24 piston package, equipped with Leroy Somer E-motor 13,5 kW 1450 RPM, oil separator, unisab II controller. Identification No. 504252, Max. 1800 RPM, swept volume 116 m³/h. Mentioned capacity by -10℃ evaporation temperature and +35℃ condensation temperature with refrigerant ammonia.

2 in stock
Cooling capacity:
53 kW/16 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Year of Manufacture:
2006
Dimensions (LxWxH):
175 x 69 x 100 cm
Weight (kg):
513 kg


IMG_2892.jpg
IMG_2892.jpg IMG_2895.jpg IMG_2897.jpg IMG_2898.jpg IMG_2893.jpg

Description / remarks:  Used and in very well maintained condition: Sabroe screw SAB128HF equipped with Leroy Somer 110kW E-motor, eco, Prosab II controller. Mentioned cooling capacity of 84kW is with refrigerant NH3 at -40°/+35°C. Sabroe SAB128HF screw package can also be delivered with a new ProFace PLC controller with touch screen. These SAB 128HF screw package has been totally overhauled recently. Number of running hours after overhaul: compressor 1: 3504 hours, compressor 2: 238 hours, compressor 3: 550 hours, compressor 4: 7375 hoursr, compressor 5: 6584 hours.

3 in stock
Cooling capacity:
84 kW/25 tons
Type of refrigerant:
All Freon/NH3 Ammonia
Voltage:
400 V
Absorbed power:
110 kW
Year of Manufacture:
1990 / 1998
Dimensions (LxWxH):
244 x 136 x 160 cm
Weight (kg):
ca. 2.900 kg


IMG_3080.JPG
IMG_3080.JPG IMG_3079.JPG IMG_3078.JPG nixel.gif nixel.gif

Description / remarks:  Used and in very well maintained condition: Sabroe SAB 128HF screw package, equipped with a Schorch 55kW E-motor( if desired with a bigger motor), eco, oil separator with pre-lubricating pump, shell & tube water-cooled oil cooler and Unisab II controller, serial nr. unit: 127135. Sabroe compressor had recently his overhaul. Mentioned cooling capacity is at an evaporating temperature of -40°C/+35°C with eco.

Cooling capacity:
85 kW/25 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Absorbed power:
55 kW
Year of Manufacture:
2004


IMG_2346zug.pac.136kW.jpg
IMG_2346zug.pac.136kW.jpg IMG_2345zug.pac.136kW.jpg IMG_2352zug.pac.136kW.jpg IMG_2347zug.pac.136kW.jpg 20170502_113439_resized.jpg

Description / remarks:  Used and in very good maintained condition: complete Sabroe SMC 106S piston package, equipped with Leroy Somer low rev E-motor 37 kW/965 RPM, oil separator, manometerset, pressostates, oil protection. Shop number 90898, speed 970 RPM, swept volume 219 m³/h.

Cooling capacity:
136 kW/40 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Absorbed power:
37 kW
Year of Manufacture:
1990
Dimensions (LxWxH):
200 x 120 x 150 cm
Weight (kg):
1400 kg


IMG_3098.JPG
IMG_3098.JPG IMG_3099.JPG IMG_3101.JPG nixel.gif nixel.gif

Description / remarks:  Used and in very well maintained condition: Sabroe SAB 163HF MK1 screw package. This unit had a complete overhaul in 2010 and is equipped as low pressure compressor (booster). When desired we can provide this Sabroe screw package with a 200kW E-motor for a -40°/+35°C application. This unit is equipped with a Schorch 75kW E-motor, oil separator, oil pump, water-cooled oil cooler and Unisab III controller, shop nr. unit: 106277R.

Cooling capacity:
183 kW/54 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Absorbed power:
140 kW
Year of Manufacture:
2002/2010


IMG_3090.JPG
IMG_3090.JPG IMG_3091.JPG IMG_3092.JPG nixel.gif nixel.gif

Description / remarks:  Used and in very well condition (complete overhaul in 2011): Sabroe SMC 108S piston package, equipped with an 8 cylinder compressor, oil separator, 75kW ABB E-motor, Unisab II controller, serial nr. unit: 73153. Swept volume compressor: 452 m³/h.

Cooling capacity:
259 kW/76 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Absorbed power:
75 kW
Year of Manufacture:
1985/2011


IMG_2608.JPG
IMG_2608.JPG IMG_2609.JPG IMG_2610.JPG IMG_2611.JPG IMG_2612.JPG

Description / remarks:  Used and in very good condition (only 18000 running hours) Sabroe screwpackage type SAB 81. This Sabroe package for industrial application is equipped with the following main components: Schorch 250kW E-motor, oil separator, Unisab II controller, switchbox with control and soft starter ABB, water-cooled condenser (plate & shell type) and plate & shell evaporator, Baltimore TXV441R or a dry cooler of your choice. Mentioned cooling capacity is with the refrigerant R410A at an evaporating temperature of-38°C and at +35°C condensing temperature. The capacity with the refrigerant R717 at -40°C evaporating temperature and condensing temperature is 185 kW.

2 units in stock
Cooling capacity:
262 kW/77 tons
Type of refrigerant:
R717/R410A
Voltage:
400 V
Absorbed power:
187 kW
Year of Manufacture:
2005
Dimensions (LxWxH):
430 x 247 x 255 cm
Weight (kg):
± 8000 kg


IMG_2655compl.inst.290kw.JPG
IMG_2655compl.inst.290kw.JPG IMG_2662compl.inst.290kw.JPG IMG_2668compl.inst.290kw.JPG IMG_2672compl.inst.290kw.JPG IMG_2658_compl.inst.290kw.jpg

Description / remarks:  Used industrial freeze-pump installation, built in a 40ft container by Sabroe Industriekälte GmbH Germany and it still had a major maintenance in 2018 by company Johnson/Sabroe. This in very good condition freeze-pump installation is equipped with the following main components: Compressor 1: TSMC 116E two-stage 16 cylinder direct-driven piston compressor, equipped with Unisab II controller, Schorch 132kW E-motor 400/460V, 50/60Hz. Compressor 2: TSMC 116L two-stage 16 cylinder direct-driven piston compressor, equipped with Unisab II controller, Schorch 110kW E-motor 400/460V, 50/60Hz. Combined low pressure -40°C/-8°C between pressure separator with 2 pieces ammonia liquid pumps, air-cooled condenser/evaporating condenser of your choice. Switch-box with Siemens S7 controller. Mentioned cooling capacity is on 400V/50Hz at an evaporating temperature of -40°C and condensing temperature of +35°C. Cooling capacity on 460V/60Hz at an evaporating temperature of -40°C and condensing temperature of +35°C is 350kW.

Cooling capacity:
290 kW/85 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400/460 V
Absorbed power:
220 kW
Year of Manufacture:
1998
Dimensions (LxWxH):
1200 x 220 x … cm
Weight (kg):
9.000 kg


IMG_1172_335kw.comp.jpg
IMG_1172_335kw.comp.jpg IMG_1173_335kw.comp.jpg IMG_1174_335kw.comp.jpg IMG_1175_335kw.comp.jpg IMG_1176_335kw.comp.jpg

Description / remarks:  Used cool compressor, brand Sabroe type SMC 108L. This in good maintained condition Sabroe piston package is equipped with the following main components: 8 V-belt driven 8 cylinder piston compressor, Prosab controller, 90 kW Leroy-Somer E-motor, oil separator. Mentioned cooling capacity of 335kW is at an evaporating temperature of -10°C and condensing temperature +35°C with refrigerant R717/Ammonia.

Cooling capacity:
335 kW/99 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Year of Manufacture:
1994
Dimensions (LxWxH):
206 x 105 x 125 cm


IMG_4658_335.compressor.jpg
IMG_4658_335.compressor.jpg IMG_4657_335.compressor.jpg IMG_4659_335.compressor.jpg nixel.gif nixel.gif

Description / remarks:  Used cool compressor, brand Sabroe type SMC 8100. This in good condition Sabroe open driven piston package is equipped with the following main components V-belt driven 8 cylinder piston compressor, 90 kW E-motor, oil separator. Mentioned cooling capacity of 335kW is at an evaporating temperature of -10°C and condensing temperature +35°C with refrigerant R717/Ammonia.

Cooling capacity:
335 kW/99 tons
Type of refrigerant:
R717/Ammonia
Voltage:
400 V
Year of Manufacture:
1978


IMG_6977com_pack_412kw.JPG
IMG_6977com_pack_412kw.JPG IMG_6978com_pack_412kw.JPG IMG_6979com_pack_412kw.JPG IMG_6980com_pack_412kw.JPG IMG_6976com_pack_412kw.JPG

Description / remarks:  Used: Sabroe SMC 108E cool/freeze compressor/package. This is in very good condition cool/freeze compressor consists of the following main components: on a frame built 8 cylinder SMC 108E cool / freeze compressor, oil separator, all required safety devices, low / high pressure meter set, 110kW E-motor, Compressor nr. 114959, stroke volume 565m3/h. Mentioned cooling capacity is with refrigerant R717/Ammonia at an evaporating temperature of -10°C and condensing temperature +35°C. Compressor package will be delivered with all necessary pressure certificates.

Cooling capacity:
412 kW/121 tons
Type of refrigerant:
Ammonia/R717
Voltage:
400 V
Year of Manufacture:
2000
Dimensions (LxWxH):
206 x 105 x 125 cm
Weight (kg):
1.800 kg


IMG_4260_796kw.chiller.jpg
IMG_4260_796kw.chiller.jpg IMG_4263_796kw.chiller.jpg IMG_4264_796kw.chiller.jpg IMG_4265_796kw.chiller.jpg IMG_4272_796kw.chiller.jpg

Description / remarks:  Used industrial air-cooled water chiller ( split model, air-cooled/evaporating condenser separate). This in very good maintained condition industrial chiller is equipped with the following main components: on frame built 2 pieces direct driven Sabroe SMC 106L piston compressors with each of Schorch 75kW E-motors. (suitable for 460V/60Hz), oil separator, water-cooled head cooling for the compressors, Retech high pressure liquid tank of 325L, Alva-Laval M10-EWFGR plate cooler coupled to a Retech separator of 416L for natural ammonia circulation. Furthermore, this good looking chiller is equipped with 2 pieces Unisab II for the controller of the compressors and switch-board. Mentioned cooling capacity is at a water/glycol outlet temperature of +6°C. Cooling capacity at a water/glycol outlet temperature of -5°C is approx.. 500kW. Cooling capacity on 60Hz at water/glycol outlet temperature of +6°C is 955kW.

Cooling capacity:
796 kW/234 tons
Number of cooling circuits:
1
Type of refrigerant:
R717/Ammonia
Voltage:
50/60Hz / 400/460 V
Absorbed power:
150 kW
Year of Manufacture:
1998
Dimensions (LxWxH):
431 x 227 x 203 cm
Weight (kg):
7.200 kg

Comron Used To Cool