Used and in very well maintained: complete YORK CMO 24 piston package, equipped with Leroy Somer E-motor 13,5 kW 1450 RPM, oil separator, unisab II controller. Identification No. 504252, Max. 1800 RPM, swept volume 116 m³/h. Mentioned capacity by -10℃ evaporation temperature and +35℃ condensation temperature with refrigerant ammonia.

Used cooling compressor, brand Sabroe, type 106L. This in good condition used cooling compressor and consist of the following main components:

• Sabroe 6 cylinder SMC 106L direct driven compressor
• Schorch 75 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130645 C. 2: 130644

Used cool compressor, brand Sabroe type SMC 8100. This in good condition Sabroe open driven piston package is equipped with the following main components V-belt driven 8 cylinder piston compressor, 90 kW E-motor, oil separator. Mentioned cooling capacity of 335kW is at an evaporating temperature of -10°C and condensing temperature +35°C with refrigerant R717/Ammonia.

Used cooling compressor, brand Sabroe, type 106L. This in good condition used cooling compressor consists of the following main components:

• Sabroe 6 cylinder SMC 106L direct driven compressor
• Schorch 75 kW E-Motor 380-460V 50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 109614 C. 2: 109613

Used cooling compressor, brand Sabroe, type 106E. This in good condition used cooling compressor consists of the following main components:

• Sabroe 6 cylinder direct driven compressor
• Leroy-Somer 110 kW E-Motor 380-460V  50/60 Hz
• Vertical oil separator
• Unisab II controller
• Serial No. Compressor 1: 130647 C. 2: 130646

New Sabroe SAB/Johnson Controls complete cool/-freeze screwpackage is assembled by Comron International and consists of the following main components:

• 1x Sabroe / Johnson Controls screw compressor package, type 233E VSD, contains: Horizontal oil separator, oil pump, thermosifon shell-and-plate/oil cooler
  New Unisab III controller, ABB 570 kW electric motor, IE4, IP55, with insulated bearings, economizer connection with control station.
• New control cabinet with Danfoss 500 kW frequency converter for the ABB E-motor.
• PED pressure certificates

The mentioned cooling capacity of 542 kW is based on refrigerant R717 (ammonia) at -40°C/ +35°C, with economizer, 60 Hz, and a compressor speed of 3,600 RPM resulting in an absorbed power of 344 kW. At -3°C / +35°C, the cooling capacity is 2439.8 kW with an absorbed power of 495.5 kW.

Used refrigeration compressor, Sabroe brand, type 116L. This used refrigeration compressor in good condition consists of the following main components:

• Sabroe 16-cylinder direct drive compressor
• Leroy-Somer 200kW E-Motor 380-460V 50/60 Hz 
• Vertical oil separator 
• Unisab II controller
• Serial No. Compressor 132154
• Swept volume 1131m³/h 
• Capacity -10/+35°C 669kW

Used industrial air-cooled water chiller ( split model, air-cooled/evaporating condenser separate). This in very good maintained condition industrial chiller is equipped with the following main components: on frame built 2 pieces direct driven Sabroe SMC 106L piston compressors with each of Schorch 75kW E-motors. (suitable for 460V/60Hz), oil separator, water-cooled head cooling for the compressors, Retech high pressure liquid tank of 325L, Alva-Laval M10-EWFGR plate cooler coupled to a Retech separator of 416L for natural ammonia circulation. Furthermore, this good looking chiller is equipped with 2 pieces Unisab II for the controller of the compressors and switch-board. Mentioned cooling capacity is at a water/glycol outlet temperature of +6°C. Cooling capacity at a water/glycol outlet temperature of -5°C is approx.. 500kW. Cooling capacity on 60Hz at water/glycol outlet temperature of +6°C is 955kW.