Used and in good condition: complete Bitzer condensing unit, equipped with all protections, liquid tank (13ltr), with fan, air-cooled condenser 2GES-3.2Y-40S 4 cylinder semi-hermetic Bitzer refrigeration/freezing compressor. Cooling capacity mentioned is at an evaporating temperature of -10° / +40°C. Cooling capacity at an evaporating temperature of -30°C / +40°C is 3.8kW with the refrigerant R507C/R404A.

Used and in good condition: complete Bitzer condensing unit, equipped with all protections, liquid tank (13ltr), with fan, air-cooled condenser 4FC-5.2Y-40S 4 cylinder semi-hermetic Bitzer refrigeration/freezing compressor. Cooling capacity mentioned is at an evaporating temperature of -10° / +40°C. Cooling capacity at an evaporating temperature of -30°C / +40°C is 3.8kW with the refrigerant R507.

Used complete condensing unit brand Danfoss type OP-MPZC136MTP00E. This in mint condition complete condensing unit is equipped with:

• 1 piece Maneurop reciprocating compressor type MTZ080
• 1 piece fan, Ø609
• Volume condenser coil 5,2l
• Airflow condenser coil 5.100m³/h
• Liquid receiver of 7-7.6l
• All necessary safety devices
• Sound pressure 45 dB(A) op 10m
• 1 piece Güntner cooling-/freezing evaporator type DHF 035B/44 L1-A 

Mentioned cooling capacity of 10,5kW is with the refrigerant R404a at -10°C/+42°C at an ambient temperature +32°C.

Used and in good condition: complete Bitzer condensing unit, equipped with all protections, liquid tank (13ltr), with fan, air-cooled condenser 4DC-5.2Y-40S 4 cylinder semi-hermetic Bitzer refrigeration/freezing compressor. Cooling capacity mentioned is at an evaporating temperature of -10° / +40°C. Cooling capacity at an evaporating temperature of -30°C / +40°C is 5.7kW with the refrigerant R507.

Used and in good condition: complete Bitzer condensing unit type Frigotronic 4 P.2, equipped with all protection, condenser, liquid tank, Bitzer open driven 4 cylinder compressor type 4 P.2, E-motor 11 kW, switchboard cabinet. Mentioned cooling capacity is at an evaporating temperature of -30°C with the refrigerant R507, capacity at-10°C evaporating is 31 kW.

Used cooling/freezing tank aggregate, brand Bitzer, type 6J-22.2Y-40P is equipped with the following main components:

• Liquid tank
• Oil separator
• Manometer set with all necessary safety devices
• Liquid filter dryer/sight glass
• Switchbox

Mentioned cooling capacity of 21,8kW is with the refrigerant R507 at -30°C /+40°C.
Cooling capacity at -10°C /+40°C is 54kW. 

Used and in good condition Bitzer 6G-30.2Y semi-hermetic refrigeration/freezing compressor. Mentioned cooling capacity is at -30°/+40°C with refrigerant R404A.

Used and in good condition: Bitzer two stage tank aggregate (very suitable for low temperature application), equipped with liquid tank, liquid separator, oil separator, closed intermediate cooler, meterset, all necessary protection. Mentioned cooling capacity is at an evaporating temperature of -35°C/+40°C with the refrigerant R507.

Used: Grasso screw package. This Grasso screw package is in very well maintained condition and equipped with a Schorch 22kW E-motor, horizontal oil separator, oil pump, water-cooled oil cooler shell & tube type, eco connection, switch-board with Unisab II controller, serial number unit 7886. Screw package will be delivered with all necessary PED certificates. Mentioned cooling capacity is with the refrigerant R717 at -40°/+35°C, absorbed power approx. 31kW.

Used and in good condition freeze compressor: brand Dorin, type K5000CS-00 is equipped with 6 cylinders in V shape. Mentioned cooling capacity is at -10°/+35°C with refrigerant R404A.

Used Bitzer freezing screw package. This in very good condition freezing screw package is equipped with:

• on frame built open Bitzer screw compressor type OSNA-7471-K connected to a Leroy-Somer 75kW E-motor
• Oil separator
• Air-cooled oil cooler
• Eco with closed between cooler for liquid subcooling
• Liquid separator on the suction side of the compressor
• All required safety devices
• Gauge

Mentioned cooling capacity is at an evaporating temperature of -40° C and a condensation temperature of +40° C with the refrigerant R507.

Used Danfoss SH300A4ACB AC Compressor 

• Danfoss Hermetic scroll compressor 
• Freon type R410A
• 49.7 M³/H 

Mentioned cooling capacity of 72 kW is with refrigerant R404a at 0°C/+40°C.

Used Copeland scroll compressor type ZP385 KCE-TWD-522

• Copeland hermetic scroll compressor 
• Freon type R410A 
• 60 M³/h 

Mentioned cooling capacity of 93 kW is with refrigerant R410A at 0°C / +40°C.

Used scroll compressor, brand Bitzer, type GSD80485VA. Mentioned cooling capacity of 102kW is at 0°C/ +40°C with the refrigerant R410A.

Used and in good condition: complete Bitzer screw package consisting of built on frame liquid tank, oil separator, water cooled oil cooler, eco with plate intercooler for liquid undercooling (year 1993) and two young Bitzer screw compressors type HSN 7461-70, serial nr. 1071100881 and 10073001971, year 2005, manometer set with all safety devices. Mentioned cooling capacity is at-40°/+35°C with refrigerant R507.

Used and in good maintained condition: complete Grasso direct drive 8 cylinder piston package, consisting of a 55 kW Schorch E-Motor, year 2004, oil separator, all security devices. Mentioned cooling capacity is at -10°C/+40°C.

Used and in very good condition, AC compressor type Z-50-154.Y 6 cylinder. Mentioned cooling capacity is at an evaporating temperature of -0° evaporating temperature of -30°C = 7,3kW.

Used Bitzer piston package. This in very good condition piston package is equipped with :

• 1 piece Bitzer piston compressor type 6H-35.2Y (frequency controlled at 60Hz)
• 1 piece Bitzer piston compressor type 4G-20.2Y
• Oil separator
• Vertical liquid tank
• Oil tank 
• High/low pressure gauges with all necessary safety devices
• Control cabinet with frequency controller brand Danfoss

Mentioned cooling capacity of 112kW is with R404a at -8°C/+45°C.

Used and in good condition: open V-belt driven Mycom 6-cylinder cooling compressor, equipped with Leroy Somer 45kW E-motor (V-belt drive), meter set, high/low oil pressure safety devices, head cooling. Mentioned cooling capacity is at -5°C evaporating temperature and +30°C condensing temperature.

Used two-stage Grasso/GEA piston package type RC72-11. This Grasso/GEA RC72-11 two-stage piston package in good condition consists of the following main components:

• Grasso 9-cylinder piston compressor type RC72-11, V-belt driven.
• WEG E-motor 75 kW / 1470 RPM - 400V - 50Hz / 1770 RPM - 460V - 60Hz / built 2019.
• Leroy E-motor 75 kW / 1470 RPM - 400V - 50Hz / 1770 RPM - 460V - 60Hz / built 2002
• Vertical oil separator.
• All necessary safeguards.
• V-belt guard.

Mentioned cooling capacity of 130 kW is with the cold agent R717/NH³ at -40°C/+35°C at 1000 RP.

Used Grasso/GEA two stage piston package. This in very good condition direct driven piston package is equipped with :

• 1 piece Grasso/GEA two stage piston compressor type RC4212
• Schorch 90kW E-motor
• Oil separator
• Closed intercooler
• All necessary safety devices

Mentioned cooling capacity of 138kW is with R717/ammonia at -32°C/+30°C at 1000RPM.

Used screw compressor, brand Bitzer type CSH7571-90Y. This cooling compressor in very good condition with specification as: 

• Refrigerant R134a
• Flow rate 258 m³/h on 2900RPM
• Eco connection

Mentioned cooling capacity is at 0°C /+40°C with eco on 50Hz /2900RPM.
Cooling capacity is 103kW at -10°C /+40°C with eco on 50Hz /2900RPM.

Used Mycom high pressure cooling compressor, well maintained, -10°C/+35°C.

Used complete Daikin condensing unit type ERAD-170 E-SS012 for outdoor application. This in new condition condensing unit is equipped with:

• Daikin mono screw compressor type HSA312QS6YA (400/460V, 50/60Hz) with stepless capacity control
• Control box

Mentioned cooling capacity is with the refrigerant R134a at an evaporating temperature of 0 °C. Capacity at evaporating temperature of -10 °C is approx. 85kW.

Used piston package brand Grasso/GEA type 35HP for heat pump application. This in very good condition direct driven piston package consists of the following main components: 

• 1 piece Grasso 3-cylinder piston compressor type 35HP, direct driven 
• 45kW WEG E-motor (400V,50Hz,1475RPM / 460V,60Hz,1770RPM)
• Vertical oil separator
• Pressure gauge set
• All security devices
• All necessary pressure certificates

Mentioned cooling capacity of 170kW is with refrigerant R717/NH₃ at +32°C /+70°C, 1200RPM.
Cooling capacity with refrigerant R717/NH3 at +5°C /+35°C on 1475RPM/50Hz is 106kW, absorbed power 18,5 kW.

Used and in very well-maintained condition Howden WRV 204 110 36/1770 screw compressor package,  equipped with the following main components:

• ABB E-motor 160kW - 400V 50hrz/ 460V 60hrz.
• Package is equipped with vertical oil separator, Shell & Tube oil cooler, oil pump en oil filter.
• Eco connection
• New Siemens PLC with HMI touch screen.
• Swept volume 815 m3/h.

Mentioned cooling capacity is at an evaporating temperature of -40°C/+35°C/Eco 172kW.

Used Bitzer Freeze package type 3 x HSN 7471-75. This Freeze package which is in very good condition, is equipped with the following main components:

• Frame built for indoor installation 3 piece HSN 7471-75 screw compressors, oil separator, oil filters, under cooler connected to the eco's of the compressors, liquid receiver.
• Separate control box with frequency control for the compressors.
• Separate air-cooled condenser of your choice.
• Freeze package will be tested after sale in our test room and a full test report will be supplied with a 3 months guarantee.

Mention colling capacity of 173kW is with refrigerant R507 at -40°C / +40°C / ECO.